After reading so many fantastic reviews I purchased the Classic model. Before I write what I think are the negative aspects I'll say that it gives a great workout! That is pretty obvious and I don't think that part is arguable. The disappointment began while unpacking. The wood parts were wrapped fairly well and did not have damage but there were several scratches that I had to sand out and re-oil. It appears that they were there before shipping. Putting it together would have been fast and easy- except 2 of the bolts were bent at about 15 degrees and would not fit. I had to wrap with tape and bend with vice grips. After getting it all together the rower worked well for about a week. I started to notice an annoying kind of popping sound from the left rail as the wheels rolled over on each stroke and recovery. It seems the plastic that the wheels ride on is not flat or adhered well to the rail. It isn't very loud but I can hear it well and it gets my attention, spoiling the nice sound of the water. Really disturbing. Support at WaterRower would like a video of the issue. Seems like an obvious issue and could swap out with a rail that is good instead of me trying to make a video of this small sound while moving the seat back and forth. For a $1500 machine the quality control- or lack of it is disturbing. Having to jump through a bunch of hoops because they are too cheap to just send a part is even more so. Perhaps I am being difficult but it is upsetting to have something touted as so great but put together like a $200 piece of junk. Another complaint would be the lack of any back lighting on the monitor. Really cannot see it if the lights are low. Being able to remove the monitor to attach to a PC wouldn't hurt either. While it gives a good workout the rower really suffers from poor manufacturing.
Motion of the water is different than the motion of the wave. Water at each location moves in a circular path, but the motions at different locations are “out of phase”, which means that when water at the left of the diagram is moving to the right, water a quarter of a wavelength to the right is moving down, and water next to it is moving to the left, and next to it is moving up, etc. The overall effect is a an “apparent” wave moving to the right. Thus, the velocity (speed) of a wave is not at all the same as the velocity of the water.
From a fitness perspective, the WaterRower Natural works 84 percent of your muscle mass, helping tone and strengthen your muscles while burning far more calories than most other aerobic machines. The exercise is also low impact, as it removes all the body weight from the ankles, knees, and hips, but still moves the limbs and joints through a full range of motion--from completely extended to completely contracted.
If you’re new to rowing, start off slow and begin with a five to ten-minute warm-up, followed by a twenty-minute workout and five to ten additional minutes for the cool down. During your workout, if you continue to consistently row at the same speed, over a period of a few sessions you should begin to notice an increase in your endurance. For a more intense workout, you can try interval training with your rower. Start off each workout by rowing for five to ten minutes at the highest resistance level, as fast as you can. Next, for two to three minutes row slowly, at the lowest resistance setting. Do this for thirty to sixty minutes. Interval training has been incorporated in many different types of exercise from cardio to strength training, and it’s designed to give your metabolism a jolt and make your body improve its fat burning abilities
Some rowing enthusiasts claim that the disproportionate number of tall rowers is simply due to the unfair advantage that tall rowers have on the ergometer. This is due to the ergometer's inability to properly simulate the larger rowers drag on a boat due to weight. Since the ergometer is used to assess potential rowers, results on the ergometer machine play a large role in a rower's career success. Thus, many erg scores are weight-adjusted, as heavyweights typically find it easier to get better erg scores. Also, since crew selection has favored tall rowers long before the advent of the ergometer, and bigger, taller crews are almost universally faster than smaller, shorter crews on the water, being tall is a definite advantage ultimately having little to do with the ergometer.
It is time to get into shape. After doing some research and talking to a few experts, at least more expert than me, I determined rowing and swimming would be the best for me to loose weight with less strain on my body. I researched and decided to rent (not buy) a Water Rower. The one page rental application is simple to complete and the staff telephone contacts were great, they answered questions, provided updates, made suggestions etc. The equipment showed up as promised. Assembly is very simple one person job and took just about a half hour, only one small allen wrench is required and it is provided. (save the box, its big but needs to be saved in the event you return the equipment) The machine is classic and elegant. It is not silent but the water swoosh sound is quite relaxing and soft. I rented a previously used matching which is slightly less expensive and shows a tiny bit of use but its exercise equipment so it is expected. Customer service is outstanding and friendly. The equipment seems really well designed and is simple to stand up and get out of the way. The only issue I had involved the the filling of the tank. Its cumbersome and could be made easier by a more convenient placement of the fill hole, it seems to be a slight design flaw. I used a new long funnel (used to add oil to a car). I checked out a few Youtube posts and videos and other users had the same minor complaint but overall everyone is really happy with this equipment. NOW I NEED to MAKE MYSELF USE IT.
The WaterRower Oxbridge is hand crafted in solid Cherrywood. Like all woods, Cherrywood may vary in color from a red-brown to deep... red. The wood will darken in color with exposure to light. For this reason all WaterRower Cherrywood components are kept in light free rooms to protect from shadowing. A new WaterRower Oxbridge will therefore appear quite light in color. The wood will however darken over time reaching a rich reddish hue.Handcrafted rowing machine with inchwater flywheel inch that replicates actual rowing feelFlywheel sits in enclosed water tank to provide smooth, quiet, self-regulated resistanceSeries 4 performance monitor tracks workout intensity, stroke rate, heart rate, and moreStores upright; measures 84 x 21 x 22 inches (W x H x D) and weighs 117 poundsStores upright; measures 84 x 21 x 22 inches (W x H x D) and weighs 117 pounds read more
Water Rower Dimensions: 88" x 22" x 20" / Weight: 74 Lbs (Empty Tank), 111 Lbs (With Water); Maximum User Weight And Height: 700 L...bs & 38" InseamExercise Rower Features Aluminum Makeup With Powder-Coated Aluminum Finish For High DurabilityBoasts Patented Water Flywheel Responsible For Its Natural Rowing Dynamic-Like Actually Driving A Boat With Oars! Other Features: Self-Regulating Resistance Levels-Making It Suitable For Any User, Little Maintenance Required (Tablets Available From Manufacturer Free Of Charge) And Inclusive Of S4 Performance Monitor (Displays Intensity, Kcalories/Hour, Stroke Rate, Heart Rate, And More! Enjoy 1 Year Commercial Warranty (Upgradeable To 3-Year Parts While 5-Year Frames Are Free Of Charge With Registration) read more
The WaterRower Oxbridge is hand crafted in solid Cherrywood. Like all woods, Cherrywood may vary in color from a red-brown to deep red. The wood will darken in color with exposure to light. For this reason all WaterRower Cherrywood components are kept in light free rooms to protect from shadowing. A new WaterRower Oxbridge will therefore appear quite light in color. The wood will however darken over time reaching a rich reddish hue. Each machine has been hand finished with three coats of Danish Oil giving a deep lustre an warmth to the wood. Wood has been chosen due to its marvellous engineering properties, primary amongst these is its ability to absorb sound and vibration enhancing the WaterRower's quietness and smoothness of use. Cherrywood, like all woods used in WaterRower construction, is a premium hardwood with incredible longevity and dimensional stability. For reasons of ecology, all our woods are harvested from replenishable forests.
In general, multi-boat competitions are organized in a series of rounds, with the fastest boats in each heat qualifying for the next round. The losing boats from each heat may be given a second chance to qualify through a repechage. The World Rowing Championships offers multi-lane racing in heats, finals and repechages. At Henley Royal Regatta two crews compete side by side in each round, in a straightforward knock-out format, with no repechages.
Racing boats are stored in boat houses. These are specially designed storage areas which usually consist of a long two-story building with a large door at one end which leads out to a pontoon or slipway on the river or lakeside. The boats are stored on racks (horizontal bars, usually metal) on the ground floor. Oars, riggers, and other equipment is stored around the boats. Boat houses are typically associated with rowing clubs and include some social facilities on the upper floor: a cafe, bar, or gym.
The most commonly damaged piece of rowing equipment is the skeg, which is a metal or plastic fin that comes out of the bottom of the boat to help maintain stability, and to assist in steering. Since the skeg sticks out below the hull of the boat it is the most vulnerable to damage, however it is relatively easy to replace skegs by gluing a new one on. Hull damage is also a significant concern both for maintaining equipment, and for rower safety. Hull damage can be caused by submerged logs, poor strapping to trailers, and collisions with other boats, docks, rocks, etc.