The coxswain (or simply the cox) is the member who sits in the boat facing the bow, steers the boat, and coordinates the power and rhythm of the rowers - by communicating to the crew through a device called a cox box and speakers. They usually sit in the stern of the boat, except in bowloaders where the coxswain lies in the bow. Bowloader are usually seen as the coxed four and coxed pair type of boat.
The Water Rower comes partly preassembled in two large boxes. The assembly instructions are reasonably good, and as long as you take your time and follow them carefully (read all the text) it takes about 45 minutes from opening the first box to trying it out. I bought bottles of distilled water to fill it, which made it easy to fill using the included funnel & hose.
A feature of the end of twentieth century rowing was the development of non-olympic multicrew racing boats, typically fixed seat-gigs, pilot boats and in Finland church- or longboats. The most usual craft in races held around the coasts of Britain during summer months is the Cornish pilot gig, most typically in the south-west, with crews of 6 from local towns and races of varying distances. The Cornish pilot gig was designed and built to ferry harbour and river pilots to and from ships in fierce coastal waters. The boat needed to be stable and fast with the large crew hence making it ideal for its modern racing usage. In Finland 14-oared churchboats race throughout the summer months, usually on lakes, and often with mixed crews. The largest gathering sees over 7000 rowers mainly rowing the 60 kilometres (37 mi) course at Sulkava near the eastern border over a long weekend in mid July. The weekend features the World Masters churchboat event which also includes a 2 kilometres (1.24 mi) dash.
The advantages with air rowers is that there is smooth action; there is only small wear and tear to its mechanism; its automatic feature adjusts according to your rate of strokes; and there is a wide range of the resistance readily available in replicating the feel of rowing through the waters. The only disadvantage of this machine is that it tends to be noise indoors.
This piece of finely tuned, hand-crafted, water-resistance workout equipment also sits at the top end of the rowing machine spectrum. Employing a water flywheel that helps to mimic the feel of rowing in actual water, the natural wood WaterRower Rowing Machine will bring you a smooth, yet challenging workout that is as tough as you want it to be. If rowing is one of the best exercises you can do for your body as far as natural motion with low to no-impact, then the WaterRower is one of the best machines to do it on.
The model E’s seat stands 6 inches higher. And while the model D’s monitor rests on an adjustable arm, the E’s sits on unbending metal. These few technical differences do nothing to impact ride feel. We recommend the $200-cheaper model D as the best buy, but the Concept 2 E will appeal to anyone who values a higher seat and more solid construction.
Being able to easily store your rower is a huge plus. Make sure you investigate how well the machine stores, if it folds up or comes apart easily to be able to put it in your closet, or in other storage areas. As an example, the Concept2 Model D rowing machine folds up nicely by a simple pull pin located in the middle of the rower. Wheels on the bottom allow for easy moving.
The tank of the WaterRower Oxbridge Rower is made from polycarbonate, one of the strongest plastics available. It is virtually indestructible. The tank is sealed and can be filled with municipal water via a small opening closed by a stopper. This water typically contains enough chlorine to remain clear for some time. After exposure to light, the chlorine will degrade; the chlorine tablets should be added periodically.
Each machine has been hand finished with Danish Oil and Urethane for protection. Wood has been chosen due to its marvelous engineering properties, primary amongst these is its ability to absorb sound and vibration enhancing the WaterRower's quietness and smoothness of use. Ash, like all woods used in WaterRower construction, is a premium hardwood with incredible longevity and dimensional stability. For reasons of ecology, all our woods are harvested from replenishable forests.
The rowing machine itself is unlike any other on the market with its patented water filled flywheel. It is hard to exactly copy the action of a scull on the water, but the mechanics of the flywheel spinning in water comes in a close second on dry land. The fact that the water is 800 times denser than air means that there is no need for any extra resistance or dampening that you will find in normal air rowers. The faster you pull, the more resistance is generated giving it infinite variability. However, if you want to be able to practice rowing with a faster stroke, you will have to reduce the amount of water in the tank unlike an air rower where you just have to adjust the baffle.