The table on the left gives the speed of waves of different wave lengths in deep water. “Deep” in this context is not an absolute value, but is relative to wave length. The simple relationship starts to to breakdown when the depth of the water is less than 1/4 th the wave length. At that depth the bottom exerts sufficient drag on the wave to slow its motion and thus decrease the wavelength [equations and more about wave speed].
Amateur competition in England began towards the end of the 18th century. Documentary evidence from this period is sparse, but it is known that the Monarch Boat Club of Eton College and the Isis Club of Westminster School were both in existence in the 1790s. The Star Club and Arrow Club in London for gentlemen amateurs were also in existence before 1800. At the University of Oxford bumping races were first organised in 1815 when Brasenose College and Jesus College boat clubs had the first annual race[14] while at Cambridge the first recorded races were in 1827.[15] Brasenose beat Jesus to win Oxford University's first Head of the River; the two clubs claim to be the oldest established boat clubs in the world. The Boat Race between Oxford University and Cambridge University first took place in 1829, and was the second intercollegiate sporting event (following the first Varsity Cricket Match by 2 years). The interest in the first Boat Race and subsequent matches led the town of Henley-on-Thames to begin hosting an annual regatta in 1839.[16]
The most commonly damaged piece of rowing equipment is the skeg, which is a metal or plastic fin that comes out of the bottom of the boat to help maintain stability, and to assist in steering. Since the skeg sticks out below the hull of the boat it is the most vulnerable to damage, however it is relatively easy to replace skegs by gluing a new one on. Hull damage is also a significant concern both for maintaining equipment, and for rower safety. Hull damage can be caused by submerged logs, poor strapping to trailers, and collisions with other boats, docks, rocks, etc.
Decreasing  speed of waves as water becomes shallow has dramatic consequences on the beach. As the waves slow, their profile (Figure on right) is laterally compressed and since each wave must carry the same energy it becomes higher. As the wave approaches shore this process continues until the height exceeds 1/7 th the wave length and the wave becomes unstable. Then the wave breaks.
Unlike most other non-combat sports, rowing has a special weight category called lightweight (Lwt for short). According to FISA, this weight category was introduced "to encourage more universality in the sport especially among nations with less statuesque people". The first lightweight events were held at the World Championships in 1974 for men and 1985 for women. Lightweight rowing was added to the Olympics in 1996.
* While there is nothing to adjust from row to row on the WaterRower, it is possible to increase or decrease the level of resistance by changing how much water you put in the drum. The monitor is pre-calibrated to match 17 liters of water, but you can change that if you want. More than 17 liters = more resistance, up to the max fill line. This is not something you'll want to change frequently, it's more of a set-it-and-forget-it thing.
Racing boats are stored in boat houses. These are specially designed storage areas which usually consist of a long two-story building with a large door at one end which leads out to a pontoon or slipway on the river or lakeside. The boats are stored on racks (horizontal bars, usually metal) on the ground floor. Oars, riggers, and other equipment is stored around the boats. Boat houses are typically associated with rowing clubs and include some social facilities on the upper floor: a cafe, bar, or gym.

Other details include dual rails with four corner wheels that increase seat stability and reduce the amount of sweat buildup; a frame that flips upright for handy storage; and a weight capacity of up to 1,000 pounds. The WaterRower Classic measures 84 by 21 by 22 inches (W x H x D), weighs 117 pounds (with water), and carries a one-year warranty on the frame and components (WaterRower will upgrade the warranty to five years on the frame and three years on the components with the completion of a registration form).

Rowing is one of the few non-weight bearing sports that exercises all the major muscle groups, including quads, biceps, triceps, lats, glutes and abdominal muscles. The sport also improves cardiovascular endurance and muscular strength. High-performance rowers tend to be tall and muscular: although extra weight does increase the drag on the boat, the larger athletes' increased power tends to be more significant. The increased power is achieved through increased length of leverage on the oar through longer limbs of the athlete. In multi-person boats (2,4, or 8), the lightest person typically rows in the bow seat at the front of the boat.

Function plays a large role in defining good design. When designers look at an object, they don't just consider its aesthetic appearance; they should also challenge it to be more versatile, to respond to the user's need, or to achieve its purpose more elegantly. Good design has the capacity to solve problems that sometimes we didn't even know we had. This is one of the ways design touches and enriches our everyday life.
At the international level, women's rowing traditionally has been dominated by Eastern European countries, such as Romania, Russia, and Bulgaria, although other countries such as Germany, Canada, the Netherlands, Great Britain and New Zealand often field competitive teams.[55][57] The United States also has had very competitive crews, and in recent years these crews have become even more competitive given the surge in women's collegiate rowing.[58]

In the 1950s- and 1960s, more sports coaches began to use rowing machines for training and assessment of athletes' performance. One such rower developed at this time was the Harrison-Cotton machine, the brainchild of John Harrison of Leichhardt Rowing Club in Sydney and Professor Frank Cotton, produced by Ted Curtain Engineering. This was the very first piece of equipment able to measure athletic power with great accuracy, and it also imitated the actual experience of rowing more closely than any previous rowing machine.


* While there is nothing to adjust from row to row on the WaterRower, it is possible to increase or decrease the level of resistance by changing how much water you put in the drum. The monitor is pre-calibrated to match 17 liters of water, but you can change that if you want. More than 17 liters = more resistance, up to the max fill line. This is not something you'll want to change frequently, it's more of a set-it-and-forget-it thing.
Sometimes, slides are placed underneath the erg to try to simulate the movement of being on the water. It allows the machine to move back and forth smoothly as if there is water beneath you. The slides can be connected in rows or columns so that rowers are forced to move together on the ergometer, similar to how they would match up their rhythm in a boat.

If you are anything like me, you read the negative reviews to see what some of the complaints could potentially be...I have found none that match with my machine or experience so far. The boxes it came in were a little bunged-up but everything on the inside was perfect. Only took about 15-20 minutes to build (first time building a row machine) and another 5-10 to fill with water. We used it for a little while before we added the danish oil.

This rower has been designed to ensure stroke consistency and utilises a triple blade impeller system. Perfect for smaller houses or apartments, this model includes the easy tilt feature for fast fold-up and storing. Assembly is a one man job that will take twenty to thirty minutes to complete. A step by step illustrated instruction manual has been included, in addition to all of the tools needed for this process.
The Concept2 Model D Indoor Rowing Machine includes the excellent PM5 monitor that provides all vital data. It can display your workout performance in two ways. You can choose to see your workout in total distance and time, or as “splits”. Splits is a way of seeing how your pace is varying along two set points. Either way is useful, but splits give you more of a “real-time”, in the moment calculation of how you are doing.
The advantages with air rowers is that there is smooth action; there is only small wear and tear to its mechanism; its automatic feature adjusts according to your rate of strokes; and there is a wide range of the resistance readily available in replicating the feel of rowing through the waters. The only disadvantage of this machine is that it tends to be noise indoors.
The WaterRower Classic Rower has been designed to optimize ease of storage. Simply lift one end and the machine stores conveniently upright in about the space of a dining room chair. The WaterRower Classic Rower has a light wooden frame, the positioning of the WaterFlywheel close to the wheels, and the leverage effect provided by the rails, makes lifting almost effortless. When stored the WaterRower's patented WaterFlywheel provides a low center of gravity making the machine very stable.

The WaterRower Classic Rowing Machine is a work of art. But before you buy one just to hang it on the wall, the more important feature of course is that this rowing machine is a high-quality, durable, and effective piece of exercise equipment that will help you get in top fitness with ease and low-impact comfort. With a user weight capacity of 1,000 lbs, WaterRower has built the Classic Rowing Machine to take everything you can throw at it. No matter how intense your workouts are, you’re not going to hurt this machine. And it accommodates everyone from beginner rowers to experienced die-hards.
I am happy with this rowing machine..it is quiet and offers good resistence without puttong too much stress on my joints...HOWEVER...the electronic counter has NOT worked from day one!!!..pulling the handle does NOT activate the meter at all!...I hve pluged in the wires and repeated that process SEVERAL times..BUT...nothing!!...I can activate the meter manually...BUT...it is USELESS for registering any rowing activity!!..As I said...good rower....USELESS Eleconic meter!!!
The first known "modern" rowing races began from competition among the professional watermen in the United Kingdom that provided ferry and taxi service on the River Thames in London. Prizes for wager races were often offered by the London Guilds and Livery Companies or wealthy owners of riverside houses.[10] The oldest surviving such race, Doggett's Coat and Badge was first contested in 1715 and is still held annually from London Bridge to Chelsea.[12] During the 19th century these races were to become numerous and popular, attracting large crowds. Prize matches amongst professionals similarly became popular on other rivers throughout Great Britain in the 19th century, notably on the Tyne. In America, the earliest known race dates back to 1756 in New York, when a pettiauger defeated a Cape Cod whaleboat in a race.[13]
Assembled dimensions: 86L x 24W x 27H inches. Total body fitness - aerobic and resistance exercise. Folds and rolls for easy stora...ge. Easy-to-use monitor keeps you on track. Brushed stainless steel frame, some assembly required. Assembled weight: 200 lbs.. Manufacturer's warranty included (see product guarantee). Fabricated tubular steel frame is full commercial model with high-level entry pointWater tank ensures smooth-gliding motion and is easy to maintainEasy-to-use training monitor tracks stroke rate, intensity, distance, and timeFast assembly with only a 5mm Allen Key wrench (included)Smooth-gliding seat wheels mounted on durable rails for stable, easy movement Handlebars, seat, and footrest are comfortable and durableWorks 84 percent of muscle mass for maximum resultsCombines aerobic workout and resistance for whole body reshapingManufacturer's warranty included: see complete details in the Product Guarantee areaDisclaimer:WaterRower will not provide support or documentation for any product transported outside of the original country of purchase. read more
Ever since the earliest recorded references to rowing, the sporting element has been present. An Egyptian funerary inscription of 1430 BC records that the warrior Amenhotep (Amenophis) II was also renowned for his feats of oarsmanship. In the Aeneid, Virgil mentions rowing forming part of the funeral games arranged by Aeneas in honour of his father.[10] In the 13th century, Venetian festivals called regata included boat races among others.[11]

Waterrower dimensions: 83'' x 22'' x 21'' / weight: 108 lbs (at minimum water level)built for home use and practically maintenance... free, rowing machine targets all major muscle groups (84% of total muscle mass) w/ excellent adjustable resistance levelsmade of kiln dried harwood for better wood strength and performance; has honey oak finish that goes well w/ other home furnitureboasts a patented water flywheel that mimics the natural dynamics of rowing yet suitable for users w/ joint concerns (chlorine tablet is available free of charge)enjoy 1 year manufacturer's warranty (upgradeable to 3-year parts while 5-year frame is free of charge w/ registration)comes w/ the s4 performance monitor for quickstart of functions and displays intensity, kcalories per hour, strokerate, heartrate, and more!Storage dimensions: 21'' x 22'' x 83'' (easily store it on end)entry height is at 12'' (at 20'' w/ optional hi-rise adaptor)noise/intrusion levels: soothing and relaxing/minimal read more


Blades, otherwise known as oars to amateurs or non rowers, are used to propel the boat. They are long (sculling: 250–300 cm; sweep oar: 340–360 cm) poles with one flat end about 50 cm long and 25 cm wide, called the blade. Classic blades were made out of wood, but modern blades are made from more expensive and durable synthetic material, the most common being carbon fiber.
Decreasing  speed of waves as water becomes shallow has dramatic consequences on the beach. As the waves slow, their profile (Figure on right) is laterally compressed and since each wave must carry the same energy it becomes higher. As the wave approaches shore this process continues until the height exceeds 1/7 th the wave length and the wave becomes unstable. Then the wave breaks.
Most people who are new to the sport of rowing have difficulty achieving low strokes rates while trying to obtain their desired intensity – there are many comments such as “it does not feel hard enough?” or “how can I make it harder?” Rowing is about ratio and rhythm and you need to focus on a long stroke length and a powerful drive phase (push with the legs and pull with the arms). Give yourself time to learn this, it can take a few weeks before you start to feel the intensity at low stroke rates.
This affordable rowing machine is streamlined, simple to use, built well, has a comfy seat with a realistic rowing movement, and especially good for a newbie. Because the cost of this machine is less than $150, it is popular on the net. As it has a hydraulic rower, resistance is provided by just one piston under the main key column. Along with a comfy cushioned seat, LCD screen, this machine provides 12 hydraulic cylinder resistances.
×