A rowing workout can produce sustainable results without negatively impacting muscles and joints. With a reported average of five hundred to a thousand calories burned per workout, rowing machines are the hottest new fitness trend in the industry. Because of this, manufacturers are working overtime to produce a wide variety of styles and types of row machines, all of which can offer an effective low-impact total body workout. With so many choices of models, it can be confusing for beginners to choose the right type. Most consumers automatically choose the cheapest rower, however, cheaper models often feature piston resistance, which is considered the worst type of technology because the workouts are uncomfortable and the machine itself is often poorly designed.
The most commonly damaged piece of rowing equipment is the skeg, which is a metal or plastic fin that comes out of the bottom of the boat to help maintain stability, and to assist in steering. Since the skeg sticks out below the hull of the boat it is the most vulnerable to damage, however it is relatively easy to replace skegs by gluing a new one on. Hull damage is also a significant concern both for maintaining equipment, and for rower safety. Hull damage can be caused by submerged logs, poor strapping to trailers, and collisions with other boats, docks, rocks, etc.

Heavyweight rowers of both sexes tend to be very tall, broad-shouldered, have long arms and legs as well as tremendous cardiovascular capacity and low body fat ratios. Olympic or International level heavyweight male oarsmen are typically anywhere between 190 cm and 206 cm (6'3" to 6'9") tall with most being around 198 cm (6'6") and weighing approximately 102 kg (225 lb) with about 6 to 7% body fat.


The WaterRower Oxbridge is hand crafted in solid Cherrywood. Like all woods, Cherrywood may vary in color from a red-brown to deep... red. The wood will darken in color with exposure to light. For this reason all WaterRower Cherrywood components are kept in light free rooms to protect from shadowing. A new WaterRower Oxbridge will therefore appear quite light in color. The wood will however darken over time reaching a rich reddish hue.Handcrafted rowing machine with inchwater flywheel inch that replicates actual rowing feelFlywheel sits in enclosed water tank to provide smooth, quiet, self-regulated resistanceSeries 4 performance monitor tracks workout intensity, stroke rate, heart rate, and moreStores upright; measures 84 x 21 x 22 inches (W x H x D) and weighs 117 poundsStores upright; measures 84 x 21 x 22 inches (W x H x D) and weighs 117 pounds read more
However, I own an air rower and have zero worries about maxing out it’s ability. I can completely exhaust myself on any type of workout. Air and water rowers are the chosen resistance type by Olympic athletes and any athlete looking to train their full-body cardio. I don’t think they would choose this resistance type if they felt they could max it out.
Heavyweight rowers of both sexes tend to be very tall, broad-shouldered, have long arms and legs as well as tremendous cardiovascular capacity and low body fat ratios. Olympic or International level heavyweight male oarsmen are typically anywhere between 190 cm and 206 cm (6'3" to 6'9") tall with most being around 198 cm (6'6") and weighing approximately 102 kg (225 lb) with about 6 to 7% body fat.
Major domestic competitions take place in dominant rowing nations and include The Boat Race and Henley Royal Regatta in the United Kingdom, the Australian Rowing Championships in Australia, the Harvard–Yale Regatta and Head of the Charles Regatta in the United States, and Royal Canadian Henley Regatta in Canada. Many other competitions often exist for racing between clubs, schools, and universities in each nation.
The WaterRower Classic Rower is hand crafted in solid American Black Walnut. Like all woods, Black Walnut may vary in color from a rich brown to purple-black. Each machine has been hand finished with three coats of Danish Oil giving a deep luster an warmth to the wood. The wood has been chosen due to its marvelous engineering properties, primary amongst these is its ability to absorb sound and vibration enhancing the WaterRower's quietness and smoothness of use. Black Walnut, like all woods used in WaterRower construction, is a premium hardwood with incredible longevity and dimensional stability. For reasons of ecology, all our woods are harvested from replenishable forests.
Now back to the aesthetics, this version of WaterRower’s natural wood line of rowers comes in beautiful Black Walnut, which the company chose for its superior sound and vibration absorption. It’s hand-made in the USA and comes with excellent warranties and customer service. Overall, WaterRower is known for the quality of their rowing machines and the Classic is no exception.  And if you do want to get this rower just as an attractive conversation piece, it easily stores upright against a wall.  That said, we strongly recommend using The WaterRower Classic Rowing Machine for fitness, not just eye-candy.
WaterRower is made in the USA using hardwood from only replenishable sources. WaterRower strives to manufacture rowing machines that are of a stylish design and built to last, while maintaining our commitment to eco-friendliness. Our WaterRower Rowing Machines are functional fitness furniture, designed not to be hidden away like other unsightly gym equipment, but to look at home in your living room. Storing the waterrower in an upright position no wider than a dining room chair, our rowing machines can be easily laid out for a quick indoor rowing exercise session. Order your WaterRower from FitnessZone.com!
There is some minor maintenance. Because it's made out of wood, which can expand and contract, the bolts need tightening every few months or so. It's easy and takes only a couple of minutes. That, and putting in a fresh water purification tablet every six to twelve months, are about it for regular maintenance. The only problem I've had with the rower (the reason for 4 stars instead of 5) was a squeak that developed after about 6 weeks. It took me some time to determine the source of the squeak, which was a metal bracket connecting the footrest board to the horizontal boards above the drum. I had to partially disassemble the top section and tighten four bolts, but that fixed the problem and it's been quiet ever since.
If you're looking at a WaterRower, you're probably also considering the Concept2. They're both great machines, but which you choose depends on your needs. I think the WaterRower is ideal for most people, but not everyone. The WaterRower has a number of advantages vs the Concept 2 - it is quieter, the mechanism up front is lower profile, it has a comfortable seat, it is much better looking, it's easier to stand up when you're not rowing and it's just ... zen-like. There is something about the smoothness of the WaterRower that makes it a joy to use, and because it's quiet you can easily stream your favorite binge-series without cranking the volume too high.
Heavyweight rowers of both sexes tend to be very tall, broad-shouldered, have long arms and legs as well as tremendous cardiovascular capacity and low body fat ratios. Olympic or International level heavyweight male oarsmen are typically anywhere between 190 cm and 206 cm (6'3" to 6'9") tall with most being around 198 cm (6'6") and weighing approximately 102 kg (225 lb) with about 6 to 7% body fat.
The WaterRower Club is hand crafted in solid Ash and stained for color. The WaterRower Club has been designed for High Traffic Areas such as Commercial Gyms, Studios, Rehabilitation Clinics, etc. Its Black Rails have been styled to prevent scuffing, other wooden components are finished in an attractive rosewood which is more resistant to soiling than the Natural model.
Comparing the rowing machine to the stationary bike, the rowing machine is superior in terms of calories burned. Yet, it’s important to note that the stationary bike is also easy on the joints and only includes the lower body. So, if you have any upper body problems then the stationary bike will be a much better choice. In 30 minutes of cycling 12-13 miles per hour, an 125lb individual will burn around 225-250 calories.
If you are anything like me, you read the negative reviews to see what some of the complaints could potentially be...I have found none that match with my machine or experience so far. The boxes it came in were a little bunged-up but everything on the inside was perfect. Only took about 15-20 minutes to build (first time building a row machine) and another 5-10 to fill with water. We used it for a little while before we added the danish oil.
This twenty minutes duration technique is designed to max your muscles out every interval, and at the same time the recovery periods assist in increasing the efficiency with the fat burning routine. Once you have prepared your rowing machine, set its resistance to four. Perform sets of ten, fifteen and twenty power strokes by pulling to handle towards the torso of your body, like doing a rowing motion. Do this motion as fast as your body permits you to. Separate your power strokes at sixty seconds, putting in only fifty percent the effort you did before this. Repeat this cycle until you have fully rowed for a total of twenty minutes.
The resistance of your rowing machine impacts how it moves. Select from hydraulic and magnetic rowing resistance. Hydraulic rowers are typically more compact in size, while magnetic machines make little noise as they operate. Details like easy-to-reach tension knobs or buttons allow you to increase or decrease the intensity of your resistance as you train.

From a fitness perspective, the WaterRower Natural works 84 percent of your muscle mass, helping tone and strengthen your muscles while burning far more calories than most other aerobic machines. The exercise is also low impact, as it removes all the body weight from the ankles, knees, and hips, but still moves the limbs and joints through a full range of motion--from completely extended to completely contracted.

×