Because of the vast array of products that might contain one of the chemicals or ingredients on the list, we must include Proposition 65 warnings in our communications with you. We are required to use exact wording as specified by the state of California. While the warning sounds alarming, the purpose is to notify you of the potential risk so that you can make an informed buying decision.

Assembly was challenging. One of the rails could not be attached because the embedded screw in the cross-beam was too crooked to fit into the hole on the rail. I had to place a nut on it to protect the screws and tap until it was true enough cap nut to be attached. The foot board is slightly wider than the top board. I will sand this to match when I reapply the finish. This will need to be done because the wood has a dry, ashy appearance. The wood is beautiful and mostly uniform. This rowing machine is a nice product, but the build quality of the unit I received was disappointing. I felt lucky that the gashes in the carton did not damage the product as the packaging was optimistic. The leading competitor I use at the gym seems to provide slightly more resistance. It is beautiful and useful, but with room for improvement.
The WaterRower Classic Rower is unsurpassed in terms of design refinement. WaterRower Classic Rower has a patented WaterFlywheel design emulates rowing like no machine before it. Smooth, silent and storing conveniently upright the WaterRower Classic Rower is perfect for any user and in any environment. The WaterRower Classic Rower has an unique patented WaterFlywheel has been designed to emulate the dynamics of a boat moving through water.

The WaterRower Classic is handcrafted from solid American Black Walnut wood, finished with danish oil. The WaterRower's patented WaterFlywheel has been specifically designed to emulate the dynamics of a boat moving though water and is unsurpassed in its simulation of the physical and physiological benefits of rowing. WaterRower will not provide support or documentation for any product transported outside of the original country of purchase


Comparing the rowing machine to the stationary bike, the rowing machine is superior in terms of calories burned. Yet, it’s important to note that the stationary bike is also easy on the joints and only includes the lower body. So, if you have any upper body problems then the stationary bike will be a much better choice. In 30 minutes of cycling 12-13 miles per hour, an 125lb individual will burn around 225-250 calories.
This affordable rowing machine is streamlined, simple to use, built well, has a comfy seat with a realistic rowing movement, and especially good for a newbie. Because the cost of this machine is less than $150, it is popular on the net. As it has a hydraulic rower, resistance is provided by just one piston under the main key column. Along with a comfy cushioned seat, LCD screen, this machine provides 12 hydraulic cylinder resistances.
First of all, if you're considering rowing, just do it. It is by far the most enjoyable and beneficial exercise I have ever tried. I've made huge strides with both cardio and muscle fitness with the WaterRower, and it's so enjoyable I look forward to exercising each day. Yes, it is more expensive than most other rowing machines, but when you compare it to a lot of other types of exercise equipment, it's actually pretty reasonable. When you also compare the exercise benefit you get, it's a bargain.
The main advantages of the water rower are that it has quiet operation; there is only little maintenance to do, the water only needs to be changed occasionally; many users love the whooshing sound of water in the tank; and its consistently smooth resistance at every stroke. Two disadvantages of this machine are it costs a lot than the air rower; and it tends to be larger in size compared to the other rowing machines.
The WaterRower Classic is handcrafted from solid American Black Walnut wood, finished with danish oil. The WaterRower's patented WaterFlywheel has been specifically designed to emulate the dynamics of a boat moving though water and is unsurpassed in its simulation of the physical and physiological benefits of rowing. WaterRower will not provide support or documentation for any product transported outside of the original country of purchase
Assembly was challenging. One of the rails could not be attached because the embedded screw in the cross-beam was too crooked to fit into the hole on the rail. I had to place a nut on it to protect the screws and tap until it was true enough cap nut to be attached. The foot board is slightly wider than the top board. I will sand this to match when I reapply the finish. This will need to be done because the wood has a dry, ashy appearance. The wood is beautiful and mostly uniform. This rowing machine is a nice product, but the build quality of the unit I received was disappointing. I felt lucky that the gashes in the carton did not damage the product as the packaging was optimistic. The leading competitor I use at the gym seems to provide slightly more resistance. It is beautiful and useful, but with room for improvement.

One downside of the Waterrower for me are the footrests. Whilst they are perfectly adequate if you want to row in shoes, rowing barefoot, which is something I like to do, is impossible. The plastic is completely square at the bottom and has sharp edges that cut into your heels. I also found that my shoes get caught when trying to put them in and out of the holders, which is a bit irritating.

The WaterRower Natural Rowing Machine with S4 Monitor is hand crafted in solid Ash and stained Honey Oak for consistency of color.... Each rowing machine has been hand finished with Danish Oil giving a deep luster and warmth to the wood. Wood has been chosen due to its marvelous engineering properties, primary amongst these is its ability to absorb sound and vibration enhancing the WaterRower's smooth and quiet performance.;Flywheel sits in enclosed water tank to provide smooth, quiet, self-regulated resistanceSeries 4 performance monitor tracks workout intensity, stroke rate, heart rate, and moreHandcrafted rowing machine with inchwater flywheel inch that replicates actual rowing feelStores upright; measures 84 x 21 x 22 inches (W x H x D) and weighs 117 poundsStores upright; measures 84 x 21 x 22 inches (W x H x D) and weighs 117 pounds read more
Our Wooden Rowing Machines are Made in the USA using hardwood from only replenishable sources. We strive to manufacture rowing machines that are of a stylish design and built to last, while maintaining our commitment to eco-friendliness. Our Rowing Machines are functional fitness furniture, designed not to be hidden away like other unsightly gym equipment, but to look at home in your living room. Storing in an upright position no wider than a dining room chair, our rowing machines can be easily laid out for a quick indoor rowing exercise session. 
The WaterRower Classic Rower is outfitted with a Series 4 performance monitor that's designed to balance technical sophistication with user-friendliness. The monitor--which includes six information and programming windows, six QuickSelection buttons, and three navigation buttons--displays your workout intensity, stroke rate, heart rate, zone bar, duration, and distance. Plus, the monitor is compatible with an optional heart rate chest strap and receiver, which helps you optimize your workout and achieve your exercise objectives.
Infinitely Variable Resistance: The benefit of a water resistance rower is that it most closely simulates a boat moving through water. When rowing the resistance is due to the effect of fluid drag acting on the boat. Go faster, resistance increases. Go slower resistance decreases. Importantly, the user chooses; regardless of age, gender, size or fitness. The WaterRower M1 LoRise's patented WaterFlywheel emulates this naturally self-paced benefit of rowing. This is a workout you can start benefitting from immediately, regardless of experience!

The rowing machine itself is unlike any other on the market with its patented water filled flywheel. It is hard to exactly copy the action of a scull on the water, but the mechanics of the flywheel spinning in water comes in a close second on dry land. The fact that the water is 800 times denser than air means that there is no need for any extra resistance or dampening that you will find in normal air rowers. The faster you pull, the more resistance is generated giving it infinite variability. However, if you want to be able to practice rowing with a faster stroke, you will have to reduce the amount of water in the tank unlike an air rower where you just have to adjust the baffle.


With magnetic rowing machines, adjusting the resistance means varying the distance between a flywheel and one or more strong magnets. This is done either manually, using mechanical sliders, or digitally by the console controls. Like hydraulic rowers, magnetic rowing machines operate quietly and have a compact design for easy storage. Unlike hydraulic rowers, they can provide a smooth and consistent workout. It's a very different kind of feel to what you'd expect from an air or water rower, though. You still get a good workout, but it doesn't simulate the sensation of rowing in quite the same way.
In sweep or sweep-oar rowing, each rower has one oar, held with both hands. This is generally done in pairs, fours, and eights. In some regions of the world, each rower in a sweep boat is referred to either as port or starboard, depending on which side of the boat the rower's oar extends to. In other regions, the port side is referred to as stroke side, and the starboard side as bow side; this applies even if the stroke oarsman is rowing on bow side and/or the bow oarsman on stroke side.
The stake format was often used in early American races. Competitors line up at the start, race to a stake, moored boat, or buoy some distance away, and return. The 180° turn requires mastery of steering. These races are popular with spectators because one may watch both the start and finish. Usually only two boats would race at once to avoid collision. The Green Mountain Head Regatta continues to use the stake format but it is run as a head race with an interval start.[42] A similar type of racing is found in UK and Irish coastal rowing, where a number of boats race out to a given point from the coast and then return fighting rough water all the way. In Irish coastal rowing the boats are in individual lanes with the races consisting of up to 3 turns to make the race distance 2.3 km.
The tank of the WaterRower Oxbridge Rower is made from polycarbonate, one of the strongest plastics available. It is virtually indestructible. The tank is sealed and can be filled with municipal water via a small opening closed by a stopper. This water typically contains enough chlorine to remain clear for some time. After exposure to light, the chlorine will degrade; the chlorine tablets should be added periodically.
* While there is nothing to adjust from row to row on the WaterRower, it is possible to increase or decrease the level of resistance by changing how much water you put in the drum. The monitor is pre-calibrated to match 17 liters of water, but you can change that if you want. More than 17 liters = more resistance, up to the max fill line. This is not something you'll want to change frequently, it's more of a set-it-and-forget-it thing.
The tank of the WaterRower Oxbridge Rower is made from polycarbonate, one of the strongest plastics available. It is virtually indestructible. The tank is sealed and can be filled with municipal water via a small opening closed by a stopper. This water typically contains enough chlorine to remain clear for some time. After exposure to light, the chlorine will degrade; the chlorine tablets should be added periodically.
The dense resistance of water creates substantial drag, but on the WaterRower models, this is perfectly tempered by a whippy cord. It coils and recoils with such steady speed that one tester noted how the Classic “eats the rope back up on recovery.” This smooth agility helps balance out the impact of encountering slow water at the start of every stroke.
Assembly was challenging. One of the rails could not be attached because the embedded screw in the cross-beam was too crooked to fit into the hole on the rail. I had to place a nut on it to protect the screws and tap until it was true enough cap nut to be attached. The foot board is slightly wider than the top board. I will sand this to match when I reapply the finish. This will need to be done because the wood has a dry, ashy appearance. The wood is beautiful and mostly uniform. This rowing machine is a nice product, but the build quality of the unit I received was disappointing. I felt lucky that the gashes in the carton did not damage the product as the packaging was optimistic. The leading competitor I use at the gym seems to provide slightly more resistance. It is beautiful and useful, but with room for improvement.
If you are anything like me, you read the negative reviews to see what some of the complaints could potentially be...I have found none that match with my machine or experience so far. The boxes it came in were a little bunged-up but everything on the inside was perfect. Only took about 15-20 minutes to build (first time building a row machine) and another 5-10 to fill with water. We used it for a little while before we added the danish oil.
×