After reading so many fantastic reviews I purchased the Classic model. Before I write what I think are the negative aspects I'll say that it gives a great workout! That is pretty obvious and I don't think that part is arguable. The disappointment began while unpacking. The wood parts were wrapped fairly well and did not have damage but there were several scratches that I had to sand out and re-oil. It appears that they were there before shipping. Putting it together would have been fast and easy- except 2 of the bolts were bent at about 15 degrees and would not fit. I had to wrap with tape and bend with vice grips. After getting it all together the rower worked well for about a week. I started to notice an annoying kind of popping sound from the left rail as the wheels rolled over on each stroke and recovery. It seems the plastic that the wheels ride on is not flat or adhered well to the rail. It isn't very loud but I can hear it well and it gets my attention, spoiling the nice sound of the water. Really disturbing. Support at WaterRower would like a video of the issue. Seems like an obvious issue and could swap out with a rail that is good instead of me trying to make a video of this small sound while moving the seat back and forth. For a $1500 machine the quality control- or lack of it is disturbing. Having to jump through a bunch of hoops because they are too cheap to just send a part is even more so. Perhaps I am being difficult but it is upsetting to have something touted as so great but put together like a $200 piece of junk. Another complaint would be the lack of any back lighting on the monitor. Really cannot see it if the lights are low. Being able to remove the monitor to attach to a PC wouldn't hurt either. While it gives a good workout the rower really suffers from poor manufacturing.
The frame is beyond durable and is designed for absorbing sound and vibration. There’s no creaking or other sounds that you might expect from wood components. It has a low center of gravity that keeps the rower in place while exerting full rowing power. The polycarbonate water tank is equally durable and practically indestructible. The Classic Rower doesn’t have any moving parts that can wear out, or belts and pulleys that need to be maintained.
The WaterRower Club is hand crafted in solid Ash and stained for color. The WaterRower Club has been designed for High Traffic Areas such as Commercial Gyms, Studios, Rehabilitation Clinics, etc. Its Black Rails have been styled to prevent scuffing, other wooden components are finished in an attractive rosewood which is more resistant to soiling than the Natural model.
In deep water the speed (or velocity) of a water wave depends only on its wave length. Specifically, the speed is proportional to the square root of the wavelength. Thus, the longer the wave length, the faster the wave, or vice versa. The speed of a single wave is called the phase speed. Amazingly, the speed of a packet of waves (the group speed) is often not the same.

The stake format was often used in early American races. Competitors line up at the start, race to a stake, moored boat, or buoy some distance away, and return. The 180° turn requires mastery of steering. These races are popular with spectators because one may watch both the start and finish. Usually only two boats would race at once to avoid collision. The Green Mountain Head Regatta continues to use the stake format but it is run as a head race with an interval start.[42] A similar type of racing is found in UK and Irish coastal rowing, where a number of boats race out to a given point from the coast and then return fighting rough water all the way. In Irish coastal rowing the boats are in individual lanes with the races consisting of up to 3 turns to make the race distance 2.3 km.
The WaterRower Club is hand crafted in solid Ash and stained for color. The WaterRower Club has been designed for High Traffic Areas such as Commercial Gyms, Studios, Rehabilitation Clinics, etc. Its Black Rails have been styled to prevent scuffing, other wooden components are finished in an attractive rosewood which is more resistant to soiling than the Natural model.
Noise level is another large factor that tips the scale more towards water rowers. Air rowers make a fairly loud “whooshing” noise every stroke, which makes them bad for people who like watching TV, have sleeping children, live in apartments, or like working out early in the AM. Water rowers do make some noise but the splashing of water in the tank is a lot quieter and more soothing than the fan noise produced by air rowers.
Rowing machines are an excellent and effective way to get exercise and muscle tone, thanks to their sliding seat and repetitive rowing motion, that allows the engagement of almost all major muscle groups, without the need for a lot of gear or a lot of space compared to most workout machines. Long renowned as the perfect aerobic exercise, the WaterRower is unmatched with its ability to burn calories within a perceived level of exertion. Low impact and body weight bearing, the WaterRower is perfect for any user, and each one is built from beautiful, rich wood that is sourced only from sustainably-managed forests where growth exceeds removal by 229%.
The WaterRower Classic Rower is unsurpassed in terms of design refinement. WaterRower Classic Rower has a patented WaterFlywheel design emulates rowing like no machine before it. Smooth, silent and storing conveniently upright the WaterRower Classic Rower is perfect for any user and in any environment. The WaterRower Classic Rower has an unique patented WaterFlywheel has been designed to emulate the dynamics of a boat moving through water.
As Stamina’s first water rower, the Wave Water Rowing Machine 1445 has all the necessities for a realistic, effective workout. Rowing on this machine feels and sounds like rowing in real life, making this a great option for those who are seeking an affordable water rower for indoor training. But even if you aren’t an avid oarsman or oarswoman, this machine truly offers a total body cardiovascular workout that’s enjoyable for everyone.
The WaterRower Club is hand crafted in solid Ash and stained for color. The WaterRower Club has been designed for High Traffic Areas such as Commercial Gyms, Studios, Rehabilitation Clinics, etc. Its Black Rails have been styled to prevent scuffing, other wooden components are finished in an attractive rosewood which is more resistant to soiling than the Natural model.
While rowing, the athlete sits in the boat facing toward the stern, and uses the oars which are held in place by the oarlocks to propel the boat forward (towards the bow). This may be done on a canal, river, lake, sea, or other large bodies of water. The sport requires strong core balance, physical strength, flexibility, and cardiovascular endurance.[5]
In deep water the speed (or velocity) of a water wave depends only on its wave length. Specifically, the speed is proportional to the square root of the wavelength. Thus, the longer the wave length, the faster the wave, or vice versa. The speed of a single wave is called the phase speed. Amazingly, the speed of a packet of waves (the group speed) is often not the same.
There is much to love about the WaterRower--and I do love it--but I would echo others' comments that although the seat rolls solidly and smoothly on the wood rails, the seat itself is very hard (I use a gel seat pad I bought for my hard fiberglass kayak seat), and the footpads are in need up rethinking and upgrading--the cheap plastic doesn't let you row in socks or barefoot and is not really worthy of a machine that is otherwise a stunning piece of engineering and a beautiful one as well. As one other person noted about his machine, my machine made a clicking noise on the return stroke, so I had to adjust the wheel underneath the top rail that connects to the footpad and pull it away gently from where it was rubbing against another component. Also, be warned: the instruction booklet is in the DVD case. I did not see the little sticker on the case telling me that, thinking I'd wait to watch the DVD until after I'd assembled it. But WaterRower has a copy of the assembly instructions on their website, along with a video (I found the written ones better and easier to follow), so I was able to assemble it with no difficulty.
I used it a few more times. The strap became more frayed in different areas. While packaging it to return I noticed there is a bungy cord underneath. The cord is already showing stretch/premature wear. This was designed poorly. I've since purchased a concept2 rower. I've found that the computer on the stamina was way off on its stroke count. It appears to have been doubling the stroke count compare to my concept2.
The Classic Rowing Machine is designed is extremely easy to use. Additionally, it has a lot of comfort features in its design. It has an ergonomically shaped handle and padded heel rests that accommodate nearly everyone. Everything on the machine can be adjusted quickly. Because there are no movement parts, maintenance is minimal. Even the computer has a lot of one button operations, so the minute you have the rower assembled, you can get to work.

At the junior level (in the United States), regattas require each rower to weigh in at least two hours before their race; they are sometimes given two chances to make weight at smaller regattas, with the exception of older more prestigious regattas, which allow only one opportunity to make weight. For juniors in the United States, the lightweight cutoff for men is 150.0 lb.; for women, it is 130.0 lb. In the fall the weight limits are increased for women, with the cutoff being 135 lb.
The WaterRower Classic Rowing Machine is a work of art. But before you buy one just to hang it on the wall, the more important feature of course is that this rowing machine is a high-quality, durable, and effective piece of exercise equipment that will help you get in top fitness with ease and low-impact comfort. With a user weight capacity of 1,000 lbs, WaterRower has built the Classic Rowing Machine to take everything you can throw at it. No matter how intense your workouts are, you’re not going to hurt this machine. And it accommodates everyone from beginner rowers to experienced die-hards.
The Apollo Pro 2 water rower is a commercial grade, natural wood rowing machine, perfect for group training or high-end home gyms. This rower’s water resistant design, meditative motion and integrity of construction sets it apart from its competitors. Handcrafted from the finest quality American Ash wrapped around a stabilising steel frame, this steadfast indoor rower offers a standout performance even in the harshest of fitness applications.
Performance is meaningless if you can’t or don’t want to use the equipment, and that’s why the Wave Water rower was built for comfort and convenience. With a wide, molded seat to accommodate users of all sizes and a padded, textured rowing handle, you can build your strength and endurance in ease. When setting up the rower, the leveling endcaps with a dial ensure stability. After your workout, storing your Wave Water rower is easy – just fold the frame and roll the rower into a closet or corner.
The proper ratio of effort is about 75 percent lower body and 25 percent upper body. Ensure you’re hitting that by driving through your legs and keeping your hands relaxed. Posture plays a big part, too. Concept 2 recommends imagining your upright profile at noon and tilting from the 11 o’clock position (drive) to the 1 o’clock position (recovery).
This type of machine provides a smooth action with little wear and tear to the mechanism, and the flywheel itself could help to keep you cool as you work out. It's worth noting that although water rowers aim for a realistic rowing feel, competitive rowers often use air rowers for land training. They tend to be less expensive than water-powered rowing machines, as well.
If you are accustomed to the natural catch and feel of on-water rowing, your rowing technique will immediately appreciate the Apollo’s unrivalled emulation of a boat gliding through water. FDF’s patented twin tank design generates a smooth uniform stroke, including no lag of resistance at the catch and continued resistance all the way to the finish.
The Challenge AR features an advanced computer monitor providing the rower with measurable performance output, an ergonomically designed seat that rides on precision bearings and rollers for absolute smoothness, an upgraded footboard with advanced heel support, and an innovative soft grip handle to eliminate stress on the hands and wrist during the comfortable, but physical workout.
John Duke, creator of the WaterRower, was inspired to try his hand at invention while working at a subsidiary for U.S. Steel. He wanted to make an indoor machine that felt as much like real rowing as possible, with a focus on aesthetics. It took him two years to get the design right, moving past failed ideas such as a flipper in the tank instead of a clutch. What began as a series of doodles at his desk turned into a sculptural piece of exercise equipment that upends expectations in two ways: by bringing water indoors, and by looking elegant and artful when stored.
The WaterRower Oxbridge is hand crafted in solid Cherrywood. Like all woods, Cherrywood may vary in color from a red-brown to deep... red. The wood will darken in color with exposure to light. For this reason all WaterRower Cherrywood components are kept in light free rooms to protect from shadowing. A new WaterRower Oxbridge will therefore appear quite light in color. The wood will however darken over time reaching a rich reddish hue.Handcrafted rowing machine with inchwater flywheel inch that replicates actual rowing feelFlywheel sits in enclosed water tank to provide smooth, quiet, self-regulated resistanceSeries 4 performance monitor tracks workout intensity, stroke rate, heart rate, and moreStores upright; measures 84 x 21 x 22 inches (W x H x D) and weighs 117 poundsStores upright; measures 84 x 21 x 22 inches (W x H x D) and weighs 117 pounds read more
×