In sweep or sweep-oar rowing, each rower has one oar, held with both hands. This is generally done in pairs, fours, and eights. In some regions of the world, each rower in a sweep boat is referred to either as port or starboard, depending on which side of the boat the rower's oar extends to. In other regions, the port side is referred to as stroke side, and the starboard side as bow side; this applies even if the stroke oarsman is rowing on bow side and/or the bow oarsman on stroke side.


The WaterRower Xeno Müller Signature Edition rowing machine is handcrafted in solid ash and finished with honey oak stain for color. The WaterRower Xeno Müller Signature Edition has been specifically designed in collaboration with US Olympian and single scull record holder Xeno Müller. This special edition rower features a wider 17" handle and lower footrests for an increased range. Another special feature is Xeno\'s signature included on the rails of either side of the rower thus inspiring you to row like an Olympian!
WaterRower Dimensions: 83'' x 22'' x 21'' / Weight: 108 Lbs (At Minimum Water Level)Built For Light Commercial Use & Practically M...aintenance Free, Rowing Machine Targets All Major Muscle Groups (84% Of Total Muscle Mass) W/ Excellent Adjustable Resistance LevelsMade W/ Kiln Dried Harwood; Danish Oil & Urethane Finish For Better Wood Performance/Strength & Cozy Feel To Your GymBoasts A Patented Water Flywheel That Mimics The Natural Dynamics Of Rowing Yet Suitable For Users W/ Joint Concerns (Chlorine Tablet Is Available Free Of Charge)Enjoy 1 Year Manufacturer's Warranty (Upgradeable To 3-Year Parts While 5-Year Frame Is Free Of Charge W/ Registration)Comes W/ The S4 Performance Monitor For QuickStart Of Functions And Displays Intensity, Kcalories Per Hour, Strokerate, Heartrate, And More!Storage Dimensions: 21'' x 22'' x 83'' (Easily Store It On End)Entry Height Is At 12'' (At 20'' W/ Optional Hi-Rise Adaptor)Noise/Intrusion Levels: Soothing & Relaxing/Minimal read more
Founded in 1818, Leander Club is the world's oldest public rowing club.[17] The second oldest club which still exists is the Der Hamburger und Germania Ruder Club which was founded 1836 and marked the beginning of rowing as an organized sport in Germany.[18] During the 19th century, as in England, wager matches in North America between professionals became very popular attracting vast crowds. Narragansett Boat Club was founded in 1838 exclusively for rowing. During an 1837 parade in Providence, R.I, a group of boatmen were pulling a longboat on wheels, which carried the oldest living survivor of the 1772 Gaspee Raid. They boasted to the crowd that they were the fastest rowing crew on the Bay. A group of Providence locals took issue with this and challenged them to race, which the Providence group summarily won. The six-man core of that group went on the following year to found NBC in 1838.[19] Detroit Boat Club was founded in 1839 and is the second oldest continuously-operated rowing club in the U.S. In 1843, the first American college rowing club was formed at Yale University.[20] The Harvard–Yale Regatta is the oldest intercollegiate sporting event in the United States,http://rowinghistory.net/Time%20Line/TL%20-1849images.htm[21] having been contested every year since 1852 (excepting interruptions for wars).
Unfortunately, the direction of water movement at the top and bottom of the wave (thick arrows) rotate the boat in the direction you don’t want to go. As you realize this you try to pull your down-hill oar up out of the water, but this just pulls you over more in the bad direction. I spare you, gentle reader, a picture of the result. As the wave carries your boat up to a crest you try to lean into it to keep the boat level, but it’s natural to also push down on the down-hill oar to help.
Rowing events use a systematic nomenclature for the naming of events, so that age, gender, ability and size of boat can all be expressed in a few numbers and letters. The first letter to be used is 'L' or 'Lt' for lightweight. If absent then the crew is open weight. This can be followed by either a 'J' or 'B' to signify junior (under 19 years) or under 23 years respectively. If absent the crew is open age (the letter 'O' is sometimes used). Next is either an 'M' or 'W' to signify if the crew are men or women. Then there is a number to show how many athletes are in the boat (1,2,4 or 8). An 'x' following the number indicates a sculling boat. Finally either a + or – is added to indicate whether the boat is coxed or coxswainless.

After reading so many fantastic reviews I purchased the Classic model. Before I write what I think are the negative aspects I'll say that it gives a great workout! That is pretty obvious and I don't think that part is arguable. The disappointment began while unpacking. The wood parts were wrapped fairly well and did not have damage but there were several scratches that I had to sand out and re-oil. It appears that they were there before shipping. Putting it together would have been fast and easy- except 2 of the bolts were bent at about 15 degrees and would not fit. I had to wrap with tape and bend with vice grips. After getting it all together the rower worked well for about a week. I started to notice an annoying kind of popping sound from the left rail as the wheels rolled over on each stroke and recovery. It seems the plastic that the wheels ride on is not flat or adhered well to the rail. It isn't very loud but I can hear it well and it gets my attention, spoiling the nice sound of the water. Really disturbing. Support at WaterRower would like a video of the issue. Seems like an obvious issue and could swap out with a rail that is good instead of me trying to make a video of this small sound while moving the seat back and forth. For a $1500 machine the quality control- or lack of it is disturbing. Having to jump through a bunch of hoops because they are too cheap to just send a part is even more so. Perhaps I am being difficult but it is upsetting to have something touted as so great but put together like a $200 piece of junk. Another complaint would be the lack of any back lighting on the monitor. Really cannot see it if the lights are low. Being able to remove the monitor to attach to a PC wouldn't hurt either. While it gives a good workout the rower really suffers from poor manufacturing.
With magnetic rowing machines, adjusting the resistance means varying the distance between a flywheel and one or more strong magnets. This is done either manually, using mechanical sliders, or digitally by the console controls. Like hydraulic rowers, magnetic rowing machines operate quietly and have a compact design for easy storage. Unlike hydraulic rowers, they can provide a smooth and consistent workout. It's a very different kind of feel to what you'd expect from an air or water rower, though. You still get a good workout, but it doesn't simulate the sensation of rowing in quite the same way.
By charter, the Schuylkill Navy’s object is "to secure united action among the several Clubs and to promote amateurism on the Schuylkill River."[23] Over the years, the group has had a role in certain ceremonial and state functions.[24] The success of the Schuylkill Navy and similar organizations contributed heavily to the extinction of professional rowing and the sport's current status as an amateur sport.[25]
There is some minor maintenance. Because it's made out of wood, which can expand and contract, the bolts need tightening every few months or so. It's easy and takes only a couple of minutes. That, and putting in a fresh water purification tablet every six to twelve months, are about it for regular maintenance. The only problem I've had with the rower (the reason for 4 stars instead of 5) was a squeak that developed after about 6 weeks. It took me some time to determine the source of the squeak, which was a metal bracket connecting the footrest board to the horizontal boards above the drum. I had to partially disassemble the top section and tighten four bolts, but that fixed the problem and it's been quiet ever since.
At the junior level (in the United States), regattas require each rower to weigh in at least two hours before their race; they are sometimes given two chances to make weight at smaller regattas, with the exception of older more prestigious regattas, which allow only one opportunity to make weight. For juniors in the United States, the lightweight cutoff for men is 150.0 lb.; for women, it is 130.0 lb. In the fall the weight limits are increased for women, with the cutoff being 135 lb.
The stake format was often used in early American races. Competitors line up at the start, race to a stake, moored boat, or buoy some distance away, and return. The 180° turn requires mastery of steering. These races are popular with spectators because one may watch both the start and finish. Usually only two boats would race at once to avoid collision. The Green Mountain Head Regatta continues to use the stake format but it is run as a head race with an interval start.[42] A similar type of racing is found in UK and Irish coastal rowing, where a number of boats race out to a given point from the coast and then return fighting rough water all the way. In Irish coastal rowing the boats are in individual lanes with the races consisting of up to 3 turns to make the race distance 2.3 km.

The meter didn't work properly. It wasn't keeping the distance - we would row for 30 mins and wouldn't even be at 1km!!! And the strokes per minute was reading double strokes (which the company said was normal - huh?). Their customer service team was good and tried to make it work but we ended up returning it and spent the extra money to get a WaterRower and it is amazing!!!

This type of machine provides a smooth action with little wear and tear to the mechanism, and the flywheel itself could help to keep you cool as you work out. It's worth noting that although water rowers aim for a realistic rowing feel, competitive rowers often use air rowers for land training. They tend to be less expensive than water-powered rowing machines, as well.
Major domestic competitions take place in dominant rowing nations and include The Boat Race and Henley Royal Regatta in the United Kingdom, the Australian Rowing Championships in Australia, the Harvard–Yale Regatta and Head of the Charles Regatta in the United States, and Royal Canadian Henley Regatta in Canada. Many other competitions often exist for racing between clubs, schools, and universities in each nation.
WaterRower (UK) Ltd was formed in 1991 to market and distribute the WaterRower throughout Europe under license to WaterRower Inc. Initially with offices in Fulham, London, a 1993 agreement provided WaterRower (UK) Ltd with the additional right to manufacture the WaterRower for Europe. Workshops were established in the idyllic stately home of the Earl and Countess of Sandwich, Mapperton Manor 
There is much to love about the WaterRower--and I do love it--but I would echo others' comments that although the seat rolls solidly and smoothly on the wood rails, the seat itself is very hard (I use a gel seat pad I bought for my hard fiberglass kayak seat), and the footpads are in need up rethinking and upgrading--the cheap plastic doesn't let you row in socks or barefoot and is not really worthy of a machine that is otherwise a stunning piece of engineering and a beautiful one as well. As one other person noted about his machine, my machine made a clicking noise on the return stroke, so I had to adjust the wheel underneath the top rail that connects to the footpad and pull it away gently from where it was rubbing against another component. Also, be warned: the instruction booklet is in the DVD case. I did not see the little sticker on the case telling me that, thinking I'd wait to watch the DVD until after I'd assembled it. But WaterRower has a copy of the assembly instructions on their website, along with a video (I found the written ones better and easier to follow), so I was able to assemble it with no difficulty.
The WaterRower Oxbridge is hand crafted in solid Cherrywood. Like all woods, Cherrywood may vary in color from a red-brown to deep... red. The wood will darken in color with exposure to light. For this reason all WaterRower Cherrywood components are kept in light free rooms to protect from shadowing. A new WaterRower Oxbridge will therefore appear quite light in color. The wood will however darken over time reaching a rich reddish hue.Handcrafted rowing machine with inchwater flywheel inch that replicates actual rowing feelFlywheel sits in enclosed water tank to provide smooth, quiet, self-regulated resistanceSeries 4 performance monitor tracks workout intensity, stroke rate, heart rate, and moreStores upright; measures 84 x 21 x 22 inches (W x H x D) and weighs 117 poundsStores upright; measures 84 x 21 x 22 inches (W x H x D) and weighs 117 pounds read more
The WaterRower Classic Rower is outfitted with a Series 4 performance monitor that's designed to balance technical sophistication with user-friendliness. The monitor--which includes six information and programming windows, six QuickSelection buttons, and three navigation buttons--displays your workout intensity, stroke rate, heart rate, zone bar, duration, and distance. Plus, the monitor is compatible with an optional heart rate chest strap and receiver, which helps you optimize your workout and achieve your exercise objectives.
The machine was easy to put together and worked well mechanically. The problem is the electronic monitor. The strokes/min registered as double the actual pace, and the distance registered as 1/10th the actual distance. I contacted customer support via email and their response was slow and inadequate. I am returning the machine and plan to buy a WaterRower.

In general, multi-boat competitions are organized in a series of rounds, with the fastest boats in each heat qualifying for the next round. The losing boats from each heat may be given a second chance to qualify through a repechage. The World Rowing Championships offers multi-lane racing in heats, finals and repechages. At Henley Royal Regatta two crews compete side by side in each round, in a straightforward knock-out format, with no repechages.
Unlike traditional rowboats or kayaks, sliding seat rowing shells are quality fitness tools that allow you a low-impact, all-over body workout. Our versatile shells are simple to operate, stable in open water conditions, and effective in providing you with a fun, safe workout, whether you are a novice or an experienced rower. Our unique folding riggers and long Delta keel make our boats portable and easy to launch.
At its founding, it had nine clubs; today, there are 12: Fairmount Rowing Association, Crescent Boat Club, Bachelors Barge Club, University Barge Club, Malta Boat Club, Vesper Boat Club, College Boat Club, Penn Athletic Club Rowing Association (Penn AC), Philadelphia Girls' Rowing Club (PGRC), Gillin Boat Club and St. Joseph's University and St. Joseph's Prep. At least 23 other clubs have belonged to the Navy at various times.[23] Many of the clubs have a rich history, and have produced a large number of Olympians and world-class competitors.[26]
Function plays a large role in defining good design. When designers look at an object, they don't just consider its aesthetic appearance; they should also challenge it to be more versatile, to respond to the user's need, or to achieve its purpose more elegantly. Good design has the capacity to solve problems that sometimes we didn't even know we had. This is one of the ways design touches and enriches our everyday life.
×