Floating Heel-Rest Design: The Rowing Machine's footboard incorporates the all-new Floating Heel-Rest design. The cup of the heel-rest follows the heel as it rises from the footboard providing stability and comfort from the beginning to end of each stroke. The heel-rest position is adjusted simply by pressing the central button to disengage the lock pins securing the footpads.

Both competitive and recreational rowing are unique in comparison to most sports because they exercise all of your major muscle groups. Everything from your legs, back, and arms are engaged while rowing. In addition, rowing is a low-impact sport. When executed properly, the rowing stroke is a fairly safe motion, providing little room for the serious injury often found in contact and high-impact sports. 1
Rowing is a low impact sport with movement only in defined ranges, so twist and sprain injuries are rare. However, the repetitive rowing action can put strain on knee joints, the spine and the tendons of the forearm, and inflammation of these are the most common rowing injuries. [9]If one rows with poor technique, especially rowing with a curved rather than straight back, other injuries may surface, including back pains. Blisters occur for almost all rowers, especially in the beginning of one's rowing career, as every stroke puts pressure on the hands, though rowing frequently tends to harden hands and generate protective calluses. Holding the oars too tightly or making adjustments to technique may cause recurring or new blisters, as it is common to feather the blade (previously described). Another common injury is getting "track bites", thin cuts on the back of one's calf or thigh caused by contact with the seat tracks at either end of the stroke.
The coxswain (or simply the cox) is the member who sits in the boat facing the bow, steers the boat, and coordinates the power and rhythm of the rowers - by communicating to the crew through a device called a cox box and speakers. They usually sit in the stern of the boat, except in bowloaders where the coxswain lies in the bow. Bowloader are usually seen as the coxed four and coxed pair type of boat.

The coxswain (or simply the cox) is the member who sits in the boat facing the bow, steers the boat, and coordinates the power and rhythm of the rowers - by communicating to the crew through a device called a cox box and speakers. They usually sit in the stern of the boat, except in bowloaders where the coxswain lies in the bow. Bowloader are usually seen as the coxed four and coxed pair type of boat.
The machine was easy to put together and worked well mechanically. The problem is the electronic monitor. The strokes/min registered as double the actual pace, and the distance registered as 1/10th the actual distance. I contacted customer support via email and their response was slow and inadequate. I am returning the machine and plan to buy a WaterRower.
Con's: Super bummed that for $1160 they couldn't include an internal ANT+ transponder and Heart Rate strap(sub $100 package). The foot straps are crap! Within the first 1000m of moderate rowing they loosen to the point of being able to pull foot out on Recovery of stroke(Yes, even with ball of foot down). I really wish the WaterCoach F.I.T. software for the S4 Monitor was macOS compatible. It'd be nice to able to customer program workouts on my MacBook Pro or iMac.
Racing boats are stored in boat houses. These are specially designed storage areas which usually consist of a long two-story building with a large door at one end which leads out to a pontoon or slipway on the river or lakeside. The boats are stored on racks (horizontal bars, usually metal) on the ground floor. Oars, riggers, and other equipment is stored around the boats. Boat houses are typically associated with rowing clubs and include some social facilities on the upper floor: a cafe, bar, or gym.
According to fitness experts, water resistance is by far the most efficient technology used in a rowing machine, and the result is a realistic rowing experience that provides a better workout with smoother and more fluid rowing. These machines use a paddle that’s suspended in a tank of water, providing a realistic sensation of rowing outdoors. Extremely quiet running, as you row the only sound you’ll hear is the gentle splashing of water moving with each stroke, which serves to enhance the realistic experience of this style of rower.
A bumps race is a multi-day race beginning with crews lined up along the river at set intervals. They start simultaneously and all pursue the boat ahead while avoiding being bumped by a boat from behind. If a crew overtakes or makes physical contact with the crew ahead, a bump is awarded. As a result, damage to boats and equipment is common during bumps racing. To avoid damage the cox of the crew being bumped may concede the bump before contact is actually made. The next day, the bumping crew will start ahead of any crews that have been bumped. The positions at the end of the last race are used to set the positions on the first day of the races the next year. Oxford and Cambridge Universities hold bumps races for their respective colleges twice a year, and there are also Town Bumps races in both cities, open to non-university crews. Oxford's races are organised by City of Oxford Rowing Club[41] and Cambridge's are organised by the Cambridgeshire Rowing Association.
The WaterRower Classic Rower is unsurpassed in terms of design refinement. WaterRower Classic Rower has a patented WaterFlywheel design emulates rowing like no machine before it. Smooth, silent and storing conveniently upright the WaterRower Classic Rower is perfect for any user and in any environment. The WaterRower Classic Rower has an unique patented WaterFlywheel has been designed to emulate the dynamics of a boat moving through water.
The WaterRower Natural is handcrafted in solid ash and stained honey oak for consistency of color. The wood was chosen due to its marvelous engineering properties, especially its ability to absorb sound and vibration, which enhances the WaterRower's quiet performance and smooth operation. Ash, like all woods used in the construction of the WaterRower, is a premium hardwood with incredible longevity and dimensional stability. In addition, the wood is harvested from replenishable forests and is hand finished with Danish oil to provide a deep luster.

Yes! The mother of indoor rowing competitions is the CRASH-B Sprints, held annually in Boston. The Charles River All-Star Has-Beens started when the U.S. boycotted the Olympics in 1980 — during the same era that Concept 2 launched their Model A; necessity met opportunity. CRASH-B is still held with aplomb and doesn’t require any special qualification of its applicants.


This type of machine provides a smooth action with little wear and tear to the mechanism, and the flywheel itself could help to keep you cool as you work out. It's worth noting that although water rowers aim for a realistic rowing feel, competitive rowers often use air rowers for land training. They tend to be less expensive than water-powered rowing machines, as well.
A bumps race is a multi-day race beginning with crews lined up along the river at set intervals. They start simultaneously and all pursue the boat ahead while avoiding being bumped by a boat from behind. If a crew overtakes or makes physical contact with the crew ahead, a bump is awarded. As a result, damage to boats and equipment is common during bumps racing. To avoid damage the cox of the crew being bumped may concede the bump before contact is actually made. The next day, the bumping crew will start ahead of any crews that have been bumped. The positions at the end of the last race are used to set the positions on the first day of the races the next year. Oxford and Cambridge Universities hold bumps races for their respective colleges twice a year, and there are also Town Bumps races in both cities, open to non-university crews. Oxford's races are organised by City of Oxford Rowing Club[41] and Cambridge's are organised by the Cambridgeshire Rowing Association.

Rowing is one of the few non-weight bearing sports that exercises all the major muscle groups, including quads, biceps, triceps, lats, glutes and abdominal muscles. The sport also improves cardiovascular endurance and muscular strength. High-performance rowers tend to be tall and muscular: although extra weight does increase the drag on the boat, the larger athletes' increased power tends to be more significant. The increased power is achieved through increased length of leverage on the oar through longer limbs of the athlete. In multi-person boats (2,4, or 8), the lightest person typically rows in the bow seat at the front of the boat.
Rowing is unusual in the demands it places on competitors. The standard world championship race distance of 2,000 metres is long enough to have a large endurance element, but short enough (typically 5.5 to 7.5 minutes) to feel like a sprint. This means that rowers have some of the highest power outputs of athletes in any sport.[35] At the same time the motion involved in the sport compresses the rowers' lungs, limiting the amount of oxygen available to them. This requires rowers to tailor their breathing to the stroke, typically inhaling and exhaling twice per stroke, unlike most other sports such as cycling where competitors can breathe freely.
The WaterRower Classic Rower is unsurpassed in terms of design refinement. WaterRower Classic Rower has a patented WaterFlywheel design emulates rowing like no machine before it. Smooth, silent and storing conveniently upright the WaterRower Classic Rower is perfect for any user and in any environment. The WaterRower Classic Rower has an unique patented WaterFlywheel has been designed to emulate the dynamics of a boat moving through water.
Adaptive rowing is a special category of races for those with physical disabilities. Under FISA rules there are 5 boat classes for adaptive rowers; mixed (2 men and 2 women plus cox) LTA (Legs, Trunk, Arms), mixed intellectual disability (2 men and 2 women plus cox) LTA (Legs, Trunk, Arms), mixed (1 man and 1 woman) TA (Trunk and Arms), and men's and women's AS (Arms and Shoulders). Events are held at the World Rowing Championships and were also held at the 2008 Summer Paralympics.[59]
Rifles Delivery Confirmation-Adult Signature Required. Customer must provide a physical address for delivery of this item. Cannot ship to a PO Box or APO/FPO addresses. Black powder rifles are not shipped to customers in IL, MI, NJ, NY and Washington, DC because of restrictions. This item will be removed from your order if your shipping address is to a restricted location.
In addition to its natural, fluid resistance, the Elite Wave Water Rowing Machine features many performance upgrades that push you to row harder, faster and longer. When mounting the rower, you will immediately notice the ease and customization of the footplates and straps. The footplates, which accommodate a wide range of foot sizes with their adjustable length, feature a heel strap that secures the feet while also allowing the heel to rise higher for a wider range of motion. There are also quick-adjust straps with finger loops so you can quickly secure your feet – even in the middle of the workout. Once you push, extend and bend, the seat glides atop the aluminum rowing beam, providing a smoother workout.
The WaterRower Oxbridge is hand crafted in solid Cherrywood. Like all woods, Cherrywood may vary in color from a red-brown to deep red. The wood will darken in color with exposure to light. For this reason all WaterRower Cherrywood components are kept in light free rooms to protect from shadowing. A new WaterRower Oxbridge will therefore appear quite light in color. The wood will however darken over time reaching a rich reddish hue. Each machine has been hand finished with three coats of Danish Oil giving a deep lustre an warmth to the wood. Wood has been chosen due to its marvellous engineering properties, primary amongst these is its ability to absorb sound and vibration enhancing the WaterRower's quietness and smoothness of use. Cherrywood, like all woods used in WaterRower construction, is a premium hardwood with incredible longevity and dimensional stability. For reasons of ecology, all our woods are harvested from replenishable forests.
I have also received negative feedback about the resistance. After 15 minutes at the maximum level, you will feel that you are hardly putting an effort to row. However, this won’t be an issue if your weight is less. This could indicate an issue with the oil or gasoline mixture in the piston. Also, issues were mentioned by other customers with the footrests. They’d problem strapping their feet. It is a bigger issue as it becomes difficult for people who have small feet as the feet keeps on slipping. The footrest grip is not tight. This is affecting particularly when you would like to experience a workout without any interruption; when you actually want to go with the flow of workout. Fast rowing also becomes difficult with this type of problem as you have to stop and strap the feet back. However, the problem could be solved by using a wide and thick Velcro straps. Use your creativity and be resourceful while coming up with the ideas to solve the problem of slipping feet.
From a fitness perspective, the WaterRower Classic works 84 percent of your muscle mass, helping tone and strengthen your muscles while burning far more calories than most other aerobic machines. The exercise is also low impact, as it removes all the body weight from the ankles, knees, and hips, but still moves the limbs and joints through a full range of motion--from completely extended to completely contracted.

There is some minor maintenance. Because it's made out of wood, which can expand and contract, the bolts need tightening every few months or so. It's easy and takes only a couple of minutes. That, and putting in a fresh water purification tablet every six to twelve months, are about it for regular maintenance. The only problem I've had with the rower (the reason for 4 stars instead of 5) was a squeak that developed after about 6 weeks. It took me some time to determine the source of the squeak, which was a metal bracket connecting the footrest board to the horizontal boards above the drum. I had to partially disassemble the top section and tighten four bolts, but that fixed the problem and it's been quiet ever since.
Rowing machines were first used in Archaic Greece. Chabrias, an Athenian military general in 4th Century B.C., invented wooden rowing simulators for his inexperienced oarsmen. This enabled them to learn technique and timing before stepping foot on actual water crafts. And it must have worked — Chabrias successfully led numerous naval attacks against the Spartans.
The Waterrower has recently been made famous by Kevin Spacy as the rowing machine used in the ‘House of Cards’. It is a type of wooden rowing machine produced and manufactured by Waterrower Inc. in New England, USA. The rowers were designed by ex-US national team rower john Duke in the mid 1980’s and the company to manufacture them was established in 1988.

The most commonly damaged piece of rowing equipment is the skeg, which is a metal or plastic fin that comes out of the bottom of the boat to help maintain stability, and to assist in steering. Since the skeg sticks out below the hull of the boat it is the most vulnerable to damage, however it is relatively easy to replace skegs by gluing a new one on. Hull damage is also a significant concern both for maintaining equipment, and for rower safety. Hull damage can be caused by submerged logs, poor strapping to trailers, and collisions with other boats, docks, rocks, etc. 
×