Note: Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you. Some states do not allow the exclusion on limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
The WaterRower Classic is handcrafted in solid American black walnut, which may vary in color from rich brown to purple/black. The black walnut was chosen due to its marvelous engineering properties, especially its ability to absorb sound and vibration, which enhances the WaterRower's quiet performance and smooth operation. Black walnut, like all woods used in the construction of the WaterRower, is a premium hardwood with incredible longevity and dimensional stability. In addition, the wood is harvested from replenishable forests and is hand finished with three coats of Danish oil to give it a deep luster and warmth.

A bumps race is a multi-day race beginning with crews lined up along the river at set intervals. They start simultaneously and all pursue the boat ahead while avoiding being bumped by a boat from behind. If a crew overtakes or makes physical contact with the crew ahead, a bump is awarded. As a result, damage to boats and equipment is common during bumps racing. To avoid damage the cox of the crew being bumped may concede the bump before contact is actually made. The next day, the bumping crew will start ahead of any crews that have been bumped. The positions at the end of the last race are used to set the positions on the first day of the races the next year. Oxford and Cambridge Universities hold bumps races for their respective colleges twice a year, and there are also Town Bumps races in both cities, open to non-university crews. Oxford's races are organised by City of Oxford Rowing Club[41] and Cambridge's are organised by the Cambridgeshire Rowing Association.

The overall rowing experience encompasses pulley, seat, and — of course — resistance. Air and water have very distinct qualities, making them impossible to compare but interesting to contrast. Air stores inertia, which feeds into intense, constant effort during a goal-oriented workout. Water’s more sluggish drag makes for demanding exercise, but one that’s less consistent.


The distinction between rowing and other forms of water transport, such as canoeing or kayaking, is that in rowing the oars are held in place at a pivot point that is in a fixed position relative to the boat, this point is the load point for the oar to act as a second class lever (the blade fixed in the water is the fulcrum). In flatwater rowing, the boat (also called a shell or fine boat) is narrow to avoid drag, and the oars are attached to oarlocks ( also called gates ) at the end of outriggers extending from the sides of the boat.[8] Racing boats also have sliding seats to allow the use of the legs in addition to the body to apply power to the oar.
Indoor rowing machines have come a long way and there are now a variety of sleek, highly-refined pieces of exercise equipment ready to get your cardio health on the upswing. Having a rower right there in your home can really be the push you need to get your muscles moving in a challenging yet comfortable way. Overall, rowing machines provide an outstanding way to increase fitness by burning calories and building muscle in a safe, low-impact way.
Originally made from wood, shells are now almost always made from a composite material (usually a double skin of carbon-fibre reinforced plastic with a sandwich of honeycomb material) for strength and weight advantages. FISA rules specify minimum weights for each class of boat so that no individual team will gain a great advantage from the use of expensive materials or technology.
1.) I keep reading about cracks and leaks that develop in the water tank. WaterRower even offers a tank repair kit for this very issue. It seems to me that this is a design flaw that they refuse to address, instead offering a fix for when it eventually occurs. Have you seen these tanks to eventually leak? I’m surprised they haven’t tried a one-piece tank.

At the junior level (in the United States), regattas require each rower to weigh in at least two hours before their race; they are sometimes given two chances to make weight at smaller regattas, with the exception of older more prestigious regattas, which allow only one opportunity to make weight. For juniors in the United States, the lightweight cutoff for men is 150.0 lb.; for women, it is 130.0 lb. In the fall the weight limits are increased for women, with the cutoff being 135 lb.
Floating Heel-Rest Design: The Rowing Machine's footboard incorporates the all-new Floating Heel-Rest design. The cup of the heel-rest follows the heel as it rises from the footboard providing stability and comfort from the beginning to end of each stroke. The heel-rest position is adjusted simply by pressing the central button to disengage the lock pins securing the footpads.
Motion of the water is different than the motion of the wave. Water at each location moves in a circular path, but the motions at different locations are “out of phase”, which means that when water at the left of the diagram is moving to the right, water a quarter of a wavelength to the right is moving down, and water next to it is moving to the left, and next to it is moving up, etc. The overall effect is a an “apparent” wave moving to the right. Thus, the velocity (speed) of a wave is not at all the same as the velocity of the water.
Originally made from wood, shells are now almost always made from a composite material (usually a double skin of carbon-fibre reinforced plastic with a sandwich of honeycomb material) for strength and weight advantages. FISA rules specify minimum weights for each class of boat so that no individual team will gain a great advantage from the use of expensive materials or technology.
The WaterRower Club is hand crafted in solid Ash and stained for color. The WaterRower Club has been designed for High Traffic Areas such as Commercial Gyms, Studios, Rehabilitation Clinics, etc. Its Black Rails have been styled to prevent scuffing, other wooden components are finished in an attractive rosewood which are more resistant to soiling than the Natural model. Each machine has been hand finished with Danish Oil and Urethane for protection. Wood has been chosen due to its marvellous engineering properties, primary amongst these is its ability to absorb sound and vibration enhancing the WaterRower's quietness and smoothness of use. Ash, like all woods used in WaterRower construction, is a premium hardwood with incredible longevity and dimensional stability. s For reasons of ecology, all our woods are harvested from replenishable forests.
The horizontal movement of the water when a wave passes is approximately equal to the up and down movement of the water. If you are on flat water and are parallel to waves made by a passing boat, your boat will move side-to-side as much as up-and–down as the wave passes under you. The side-to-side movement actually creates most of the difficulty in balancing the boat in such a situation. However, under typical conditions in the bay there can be such varied wave action that you can’t easily distinguish horizontal and vertical motion.
Now back to the aesthetics, this version of WaterRower’s natural wood line of rowers comes in beautiful Black Walnut, which the company chose for its superior sound and vibration absorption. It’s hand-made in the USA and comes with excellent warranties and customer service. Overall, WaterRower is known for the quality of their rowing machines and the Classic is no exception.  And if you do want to get this rower just as an attractive conversation piece, it easily stores upright against a wall.  That said, we strongly recommend using The WaterRower Classic Rowing Machine for fitness, not just eye-candy.
Row your way to fitness with this water rowing machine from WaterRower. The A1 S4 Natural is a low-maintenance exercise machine th...at's constructed from high-quality ash wood with aluminum mono rail. Engineered with the patented WaterFlywheel resistance method, it provides life-like water rowing experience while the low noise level and minimal intrusion along with the unique self-regulating resistance with infinite variable allows suits any user without the need for adjustments. With its no impact and non-load bearing, this gym equipment is also perfect for users with joint problems. Exercise all major muscle groups like the arms, legs, back, shoulders, core, etc. and see how great you're doing with the help of the S4 monitor that comes with the package. It monitors time per 2 or 500 kilometers, watts, calories burned per hour, distance, and the total time of workouts. This exercise machine also boasts minimal maintenance with no lubrication needed. You simply need to add purification tablet every 3-6 months (tablets come with the package). Storage is easy and hassle-free as well. Simply tip the machine vertically and you can easily lean it against a wall or hide it inside a closet. Moreover, enjoy 1 year manufacturer warranty (can be upgraded to 3 years parts and 5 years frame warranty for free with registration) read more
As with any fitness activity, it’s important to exercise with proper technique, however. The big muscles in the legs are where most of the workout action should be. Injury to the lower back can occur from bending too far forward in the row. It’s best to maintain a upright 90 degree angle to the rowing machine’s seat and slider bar. Using the legs for the motion rather than relying as heavily on the back or arms can help reduce the chance of muscle pulls or other related injuries. Always check with a physician before starting any new fitness regimen.
Unlike the 1445, the Elite Wave Water Rowing Machine includes an upgraded, high-end fitness monitor and a chest strap heart rate sensor. Programmed to sync seamlessly with the multi-function monitor, the data the sensor provides allows you to tailor your workout. For example, you can target a certain heart rate for weight loss or to increase endurance by adjusting your rowing speed and therefore, your rowing intensity. In addition to pulse, the multi-function monitor also tracks distance, time, calories burned, stroke count and strokes per minute to further motivate you during your rowing session. For further customization, users can also add or remove water using the included siphon to either increase or decrease the resistance.
The WaterRower Natural Rowing Machine with S4 Monitor is hand crafted in solid Ash and stained Honey Oak for consistency of color.... Each rowing machine has been hand finished with Danish Oil giving a deep luster and warmth to the wood. Wood has been chosen due to its marvelous engineering properties, primary amongst these is its ability to absorb sound and vibration enhancing the WaterRower's smooth and quiet performance.;Flywheel sits in enclosed water tank to provide smooth, quiet, self-regulated resistanceSeries 4 performance monitor tracks workout intensity, stroke rate, heart rate, and moreHandcrafted rowing machine with inchwater flywheel inch that replicates actual rowing feelStores upright; measures 84 x 21 x 22 inches (W x H x D) and weighs 117 poundsStores upright; measures 84 x 21 x 22 inches (W x H x D) and weighs 117 pounds read more
×