This rower has been designed to ensure stroke consistency and utilises a triple blade impeller system. Perfect for smaller houses or apartments, this model includes the easy tilt feature for fast fold-up and storing. Assembly is a one man job that will take twenty to thirty minutes to complete. A step by step illustrated instruction manual has been included, in addition to all of the tools needed for this process.
The WaterRower Club Rower has been designed for high traffic areas such as commercial gyms, studios, rehabilitation clinics, etc. Its black rails have been styled to prevent scuffing; other wooden components are finished in an attractive rosewood which are more resistant to soiling than the natural model. Each machine has been hand finished with Danish oil and urethane for protection. Wood has been chosen due to its marvelous engineering properties, primary amongst these is its ability to absorb sound and vibration enhancing the waterrower's quietness and smoothness of use. Ash, like all woods used in WaterRower construction, is a premium hardwood with incredible longevity and dimensional stability. For reasons of ecology, all WaterRower woods are harvested from replenishable forests. WaterRower Club Rower Black Rails have been styled to prevent scuffing, other wooden components are finished in an attractive rosewood which are more resistant to soiling than the Natural model.
The WaterRower Club Rower has been designed for high traffic areas such as commercial gyms, studios, rehabilitation clinics, etc. Its black rails have been styled to prevent scuffing; other wooden components are finished in an attractive rosewood which are more resistant to soiling than the natural model. Each machine has been hand finished with Danish oil and urethane for protection. Wood has been chosen due to its marvelous engineering properties, primary amongst these is its ability to absorb sound and vibration enhancing the waterrower's quietness and smoothness of use. Ash, like all woods used in WaterRower construction, is a premium hardwood with incredible longevity and dimensional stability. For reasons of ecology, all WaterRower woods are harvested from replenishable forests. WaterRower Club Rower Black Rails have been styled to prevent scuffing, other wooden components are finished in an attractive rosewood which are more resistant to soiling than the Natural model.
The Challenge AR has the capability to allow the rower to control and adjust the resistance from “Feather light” to “Olympic sprint” delivering a silky smooth resistance to the user’s effort and instantaneous response to input with no “flat sport”.  With water resistance being the most accurate manner in which to simulate actual outdoor rowing, the Challenge AR provides a smooth and consistent sensation throughout the range of motion of the exercise experience.  

We picked the brains of rowing coaches, fitness experts, and physical therapists to learn what features make for an exceptional rower. Based on their input, we searched the market for air and water resistance rowing machines, then tested the best for ride feel and design. We found one model of each type — air resistance and water resistance — that felt truly superior to the others.
The WaterRower Classic Rowing Machine is an amazing and long-term investment in your health, as well as the beauty of your home décor. For the money, the durability, quality and guarantee to have a great rowing machine for a very long time. On top of that, this machine provides a level of comfort that will allow you to extend your workouts for an ultimate experience. Highly recommended.
Major domestic competitions take place in dominant rowing nations and include The Boat Race and Henley Royal Regatta in the United Kingdom, the Australian Rowing Championships in Australia, the Harvard–Yale Regatta and Head of the Charles Regatta in the United States, and Royal Canadian Henley Regatta in Canada. Many other competitions often exist for racing between clubs, schools, and universities in each nation.

The rowing machine itself is unlike any other on the market with its patented water filled flywheel. It is hard to exactly copy the action of a scull on the water, but the mechanics of the flywheel spinning in water comes in a close second on dry land. The fact that the water is 800 times denser than air means that there is no need for any extra resistance or dampening that you will find in normal air rowers. The faster you pull, the more resistance is generated giving it infinite variability. However, if you want to be able to practice rowing with a faster stroke, you will have to reduce the amount of water in the tank unlike an air rower where you just have to adjust the baffle.

The meter didn't work properly. It wasn't keeping the distance - we would row for 30 mins and wouldn't even be at 1km!!! And the strokes per minute was reading double strokes (which the company said was normal - huh?). Their customer service team was good and tried to make it work but we ended up returning it and spent the extra money to get a WaterRower and it is amazing!!!
Although the oar can be conveniently thought of as a lever with a "fixed" pivot point in the water, the blade moves sideways and sternwards through the water, so that the magnitude of the propulsion force developed is the result of a complex interaction between unsteady fluid mechanics (the water flow around the blade) and solid mechanics and dynamics (the handle force applied to the oar, the oar's inertia and bending characteristic, the acceleration of the boat and so on).
The WaterRower Oxbridge is hand crafted in solid Cherrywood. Like all woods, Cherrywood may vary in color from a red-brown to deep red. The wood will darken in color with exposure to light. For this reason all WaterRower Cherrywood components are kept in light free rooms to protect from shadowing. A new WaterRower Oxbridge will therefore appear quite light in color. The wood will however darken over time reaching a rich reddish hue. Each machine has been hand finished with three coats of Danish Oil giving a deep lustre an warmth to the wood. Wood has been chosen due to its marvellous engineering properties, primary amongst these is its ability to absorb sound and vibration enhancing the WaterRower's quietness and smoothness of use. Cherrywood, like all woods used in WaterRower construction, is a premium hardwood with incredible longevity and dimensional stability. For reasons of ecology, all our woods are harvested from replenishable forests.

The OMNI T1X next-generation, cutting-edge, gold standard touring class open water and coastal rowing shell is available for purchase spring 2015!   The new OMNI T1X is 19' long with significant design updates to row and track well on flat water as well as be the ultimate performance and safe rowing shell rowing through chop, wake and swells found on magnificent large bodies of water.   We've modeled the OMNI T1X after the best features of U.S. manufactured open water shells and built-in the efficient, self-bailing open transom found in all European built Coastal Rowing Shells. The OMNI T1X is a versatile, adjustable shell accommodating both tall and short rowers of varying weights.  You'll find the slightly uplifted bow shape slicing through chop with ease, the self-bailing open transom efficiently shedding water against the roughest conditions; the long, tapered built-in keel tracking well and the hull shape & stabiity necessary to catch, lock-on and drive past the competition in the roughest of open water stretches. Meeting the maximum length for Open Water Competition Touring Class shells at 19', the new OMNI T1X is light, stiff and ready to deliver optimal performance for our most competitive endurance rowers and a boat to last a life-time for recreation and fitness rowers. 


Amateur competition in England began towards the end of the 18th century. Documentary evidence from this period is sparse, but it is known that the Monarch Boat Club of Eton College and the Isis Club of Westminster School were both in existence in the 1790s. The Star Club and Arrow Club in London for gentlemen amateurs were also in existence before 1800. At the University of Oxford bumping races were first organised in 1815 when Brasenose College and Jesus College boat clubs had the first annual race[14] while at Cambridge the first recorded races were in 1827.[15] Brasenose beat Jesus to win Oxford University's first Head of the River; the two clubs claim to be the oldest established boat clubs in the world. The Boat Race between Oxford University and Cambridge University first took place in 1829, and was the second intercollegiate sporting event (following the first Varsity Cricket Match by 2 years). The interest in the first Boat Race and subsequent matches led the town of Henley-on-Thames to begin hosting an annual regatta in 1839.[16]

Being able to easily store your rower is a huge plus. Make sure you investigate how well the machine stores, if it folds up or comes apart easily to be able to put it in your closet, or in other storage areas. As an example, the Concept2 Model D rowing machine folds up nicely by a simple pull pin located in the middle of the rower. Wheels on the bottom allow for easy moving.
The standard length races for the Olympics and the World Rowing Championships is 2 kilometres (1.24 mi) long; 1.5 kilometres (0.93 mi) - 2 kilometres (1.24 mi) for US high school races on the east coast; and 1,000 m for masters rowers (rowers older than 27). However the race distance can and does vary from dashes or sprints, which may be 500 metres (1,640 ft) long, to races of marathon or ultra-marathon length races such as the Tour du Léman in Geneva, Switzerland which is 160 kilometres (99 mi),[36] and the 2 day, 185-kilometre (115 mi) Corvallis to Portland Regatta[37] held in Oregon, USA. In the UK, regattas are generally between 500 metres (1,640 ft) and 2 kilometres (1.24 mi) long.

THL: Stay a safe distance from vertical surfaces if there are significant waves present in the area. A passing boat or ship may generate big waves that escape your attention until there is no time to escape. An example is the North anchorage of the Golden Gate Bridge (but there are special cases, e.g. rough water classes or the OWRC regatta, when there is a fast flood coming through the Golden Gate, and it is useful to be close to the wall since the current is slower there).
There are many differing sets of rules governing racing, and these are generally defined by the governing body of the sport in a particular country—e.g., British Rowing in England and Wales, Rowing Australia in Australia, and USRowing in the United States. In international competitions, the rules are set out by the world governing body, the Fédération Internationale des Sociétés d'Aviron (FISA). The rules are mostly similar but do vary; for example, British Rowing requires coxswains to wear buoyancy aids at all times, whereas FISA rules do not.

Fetch is the distance over which the wind interacts with the water surface to creates waves. The longer the fetch the bigger (higher) the waves are. If the shore (green in the diagram) is a hill, there will be a wind shadow which gives protection from the wind, but even if the shore is flat as a pancake and gives no protection, the waves become progressively smaller as you for upwind to the shore. Thus, rowing upwind toward shore is always an escape from waves.
This twenty minutes duration technique is designed to max your muscles out every interval, and at the same time the recovery periods assist in increasing the efficiency with the fat burning routine. Once you have prepared your rowing machine, set its resistance to four. Perform sets of ten, fifteen and twenty power strokes by pulling to handle towards the torso of your body, like doing a rowing motion. Do this motion as fast as your body permits you to. Separate your power strokes at sixty seconds, putting in only fifty percent the effort you did before this. Repeat this cycle until you have fully rowed for a total of twenty minutes.
The WaterRower Oxbridge Rower in Cherrywood is designed for equally gorgeous look and performance. Every detail complements the overall aesthetic and performance of this unparalleled machine. Built in America, the WaterRower Oxbridge Rower in Cherrywood is a product of modern European design. It's hand-crafted in solid ash and stained honey oak for consistency of color. Each machine has been hand-finished with Danish Oil, which lends a deep warmth and luster. Wood has been chosen for its marvelous engineering properties; primary amongst these is its ability to absorb sound and vibration, which enhances the WaterRower Oxbridge Rower quietness and smoothness of use. Ash, like all woods used in WaterRower construction, is a premium hardwood with incredible longevity and dimensional stability. For reasons of ecology, all woods are harvested from renewable forests. The frame is more than stylish; it holds up to 2,200 lbs!
Originally made from wood, shells are now almost always made from a composite material (usually a double skin of carbon-fibre reinforced plastic with a sandwich of honeycomb material) for strength and weight advantages. FISA rules specify minimum weights for each class of boat so that no individual team will gain a great advantage from the use of expensive materials or technology.
Please Note: If you select Express or Expedited shipping, your order must be received and credit must be approved by 12:30 p.m. EST, or it may not be processed until the next business day. Expedited shipping is available for select products. You can view complete shipping options for your product in your shopping cart. The estimated delivery date for your order will be provided on the order review page prior to completing the order.
I have also received negative feedback about the resistance. After 15 minutes at the maximum level, you will feel that you are hardly putting an effort to row. However, this won’t be an issue if your weight is less. This could indicate an issue with the oil or gasoline mixture in the piston. Also, issues were mentioned by other customers with the footrests. They’d problem strapping their feet. It is a bigger issue as it becomes difficult for people who have small feet as the feet keeps on slipping. The footrest grip is not tight. This is affecting particularly when you would like to experience a workout without any interruption; when you actually want to go with the flow of workout. Fast rowing also becomes difficult with this type of problem as you have to stop and strap the feet back. However, the problem could be solved by using a wide and thick Velcro straps. Use your creativity and be resourceful while coming up with the ideas to solve the problem of slipping feet.
After reading so many fantastic reviews I purchased the Classic model. Before I write what I think are the negative aspects I'll say that it gives a great workout! That is pretty obvious and I don't think that part is arguable. The disappointment began while unpacking. The wood parts were wrapped fairly well and did not have damage but there were several scratches that I had to sand out and re-oil. It appears that they were there before shipping. Putting it together would have been fast and easy- except 2 of the bolts were bent at about 15 degrees and would not fit. I had to wrap with tape and bend with vice grips. After getting it all together the rower worked well for about a week. I started to notice an annoying kind of popping sound from the left rail as the wheels rolled over on each stroke and recovery. It seems the plastic that the wheels ride on is not flat or adhered well to the rail. It isn't very loud but I can hear it well and it gets my attention, spoiling the nice sound of the water. Really disturbing. Support at WaterRower would like a video of the issue. Seems like an obvious issue and could swap out with a rail that is good instead of me trying to make a video of this small sound while moving the seat back and forth. For a $1500 machine the quality control- or lack of it is disturbing. Having to jump through a bunch of hoops because they are too cheap to just send a part is even more so. Perhaps I am being difficult but it is upsetting to have something touted as so great but put together like a $200 piece of junk. Another complaint would be the lack of any back lighting on the monitor. Really cannot see it if the lights are low. Being able to remove the monitor to attach to a PC wouldn't hurt either. While it gives a good workout the rower really suffers from poor manufacturing.
It provides a pretty impressive cardiovascular workout that will leave you feeling rejuvenated and empowered at the same time. This is a water resistance model that allows you to smoothly cut through water using all the major muscle groups, without putting unnecessary strain on the lower back and joints. This is the perfect workout for users who cannot participate in high impact workouts.
When waves run into water moving in the opposite direction, they are slowed, just as if they were approaching a beach. Wave length becomes shorter, wave height higher, and they may break. A good (bad) example of this is an ebb current flowing out of Raccoon Strait into waves coming in from the Golden Gate. Good rough water training, if that’s what you want.
WaterRower Rowing Machines offer a pleasant rowing exercise while holding true to the dynamics of on-water rowing; burn up to 1000 calories an hour and work up to 84 percent of your muscle mass! Rowing provides an effective, high-intensity, cardio workout, while maintaining a low-impact to the joints. Workout at your own pace as the WaterFlyWheel's self-regulating resistance dynamically adjusts to each of your strokes. Unlike common ergometers, to change resistance on a WaterRower rowing machine you simply row harder!
According to Men’s Total Fitness, rowing machines are not only great for aerobic workouts, but they also work all of your body's major muscle groups. What’s more, you don’t have to go to the gym to work out on a rowing machine, as many manufacturers make high-quality rowing machines -- and even rowing machines that fold up for easy storage -- that are suitable for home use. Two popular types of rowing machines are the water rower and the air rower.
In sweep or sweep-oar rowing, each rower has one oar, held with both hands. This is generally done in pairs, fours, and eights. In some regions of the world, each rower in a sweep boat is referred to either as port or starboard, depending on which side of the boat the rower's oar extends to. In other regions, the port side is referred to as stroke side, and the starboard side as bow side; this applies even if the stroke oarsman is rowing on bow side and/or the bow oarsman on stroke side.
Copyright © 2018 Leaf Group Ltd. Use of this web site constitutes acceptance of the LIVESTRONG.COM Terms of Use, Privacy Policy and Copyright Policy. The material appearing on LIVESTRONG.COM is for educational use only. It should not be used as a substitute for professional medical advice, diagnosis or treatment. LIVESTRONG is a registered trademark of the LIVESTRONG Foundation. The LIVESTRONG Foundation and LIVESTRONG.COM do not endorse any of the products or services that are advertised on the web site. Moreover, we do not select every advertiser or advertisement that appears on the web site-many of the advertisements are served by third party advertising companies.
It's been nearly 30 years since John Duke, a former Yale University and USA National Team oarsman, set up a small shop in Rhode Island, USA to begin fine-tuning his innovative water-resistant rowing machine. With its beautiful design and unmatched feel, the WaterRower quickly gained a cult-like following of both on-water rowers and fitness enthusiasts that had found their perfect piece of workout equipment. As word spread of the new product that simulated the feel of on-water rowing, WaterRower transitioned from simply a one-off product found within the occasional boathouse to an established brand in both the rowing and fitness world.
The first international women's races were the 1954 European Rowing Championships.[54] The introduction of women's rowing at the 1976 Summer Olympics in Montreal increased the growth of women's rowing because it created the incentive for national rowing federations to support women's events. Rowing at the 2012 Summer Olympics in London included six events for women compared with eight for men.[55] In the US, rowing is an NCAA sport for women but not for men;[56] though it is one of the country's oldest collegiate sports, the difference is in large part due to the requirements of Title IX.

When waves run into water moving in the opposite direction, they are slowed, just as if they were approaching a beach. Wave length becomes shorter, wave height higher, and they may break. A good (bad) example of this is an ebb current flowing out of Raccoon Strait into waves coming in from the Golden Gate. Good rough water training, if that’s what you want.
×