Rowing is a cyclic (or intermittent) form of propulsion such that in the quasi-steady state the motion of the system (the system comprising the rower, the oars, and the boat), is repeated regularly. In order to maintain the steady-state propulsion of the system without either accelerating or decelerating the system, the sum of all the external forces on the system, averaged over the cycle, must be zero. Thus, the average drag (retarding) force on the system must equal the average propulsion force on the system. The drag forces consist of aerodynamic drag on the superstructure of the system (components of the boat situated above the waterline), as well as the hydrodynamic drag on the submerged portion of the system. The propulsion forces are the forward reaction of the water on the oars while in the water. Note also that the oar can be used to provide a drag force (a force acting against the forward motion) when the system is brought to rest.
Amateur competition in England began towards the end of the 18th century. Documentary evidence from this period is sparse, but it is known that the Monarch Boat Club of Eton College and the Isis Club of Westminster School were both in existence in the 1790s. The Star Club and Arrow Club in London for gentlemen amateurs were also in existence before 1800. At the University of Oxford bumping races were first organised in 1815 when Brasenose College and Jesus College boat clubs had the first annual race[14] while at Cambridge the first recorded races were in 1827.[15] Brasenose beat Jesus to win Oxford University's first Head of the River; the two clubs claim to be the oldest established boat clubs in the world. The Boat Race between Oxford University and Cambridge University first took place in 1829, and was the second intercollegiate sporting event (following the first Varsity Cricket Match by 2 years). The interest in the first Boat Race and subsequent matches led the town of Henley-on-Thames to begin hosting an annual regatta in 1839.[16]
The recovery phase follows the drive. The recovery starts with the extraction and involves coordinating the body movements with the goal to move the oar back to the catch position. In extraction, the rower pushes down on the oar handle to quickly lift the blade from the water and rapidly rotates the oar so that the blade is parallel to the water. This process is sometimes referred to as feathering the blade. Simultaneously, the rower pushes the oar handle away from the chest. The blade emerges from the water square and feathers immediately once clear of the water. After feathering and extending the arms, the rower pivots the body forward. Once the hands are past the knees, the rower compresses the legs which moves the seat towards the stern of the boat. The leg compression occurs relatively slowly compared to the rest of the stroke, which affords the rower a moment to recover, and allows the boat to glide through the water. The gliding of the boat through the water during recovery is often called run.
The WaterRower Oxbridge Rower in Cherrywood is designed for equally gorgeous look and performance. Every detail complements the overall aesthetic and performance of this unparalleled machine. Built in America, the WaterRower Oxbridge Rower in Cherrywood is a product of modern European design. It's hand-crafted in solid ash and stained honey oak for consistency of color. Each machine has been hand-finished with Danish Oil, which lends a deep warmth and luster. Wood has been chosen for its marvelous engineering properties; primary amongst these is its ability to absorb sound and vibration, which enhances the WaterRower Oxbridge Rower quietness and smoothness of use. Ash, like all woods used in WaterRower construction, is a premium hardwood with incredible longevity and dimensional stability. For reasons of ecology, all woods are harvested from renewable forests. The frame is more than stylish; it holds up to 2,200 lbs!

One of the major deciding factors between water and air rowers is price. Water rowing machines are often found in higher price ranges with the lowest model going for $700 and the best models starting around $1,100. Air rowers are found in every price range starting at $300 and going as high as $1,000+. The affordability of air rowing machines makes them very popular.


The frame is beyond durable and is designed for absorbing sound and vibration. There’s no creaking or other sounds that you might expect from wood components. It has a low center of gravity that keeps the rower in place while exerting full rowing power. The polycarbonate water tank is equally durable and practically indestructible. The Classic Rower doesn’t have any moving parts that can wear out, or belts and pulleys that need to be maintained.

The WaterRower US office got in on the Pull for a Cure fundraising action and all pulled together to raise money for breast cancer! - - - - As many of you may already know, throughout the month of October, WaterRower has been raising money through our Pull for a Cure fundraiser. For each 500m workout rowed and posted online, we'll be donating $1 towards breast cancer research! Don't forget to get your workouts in before Monday, October 31st! #PullForaCure #WaterRower
 The amount of water in the tank simulates the weight of the boat and crew, the more water in the tank the heavier the boat and crew. The standard Calibration Level is Level 17. If the user is lighter in weight, Level 15-16 can be used. If the user is heavier in weight, level 18-19 can be used. The maximum level to fill the tank is Level 19. DO NOT fill above the maximum level – this could void the warranty.
Indoor rowing machines have come a long way and there are now a variety of sleek, highly-refined pieces of exercise equipment ready to get your cardio health on the upswing. Having a rower right there in your home can really be the push you need to get your muscles moving in a challenging yet comfortable way. Overall, rowing machines provide an outstanding way to increase fitness by burning calories and building muscle in a safe, low-impact way.
At the international level, women's rowing traditionally has been dominated by Eastern European countries, such as Romania, Russia, and Bulgaria, although other countries such as Germany, Canada, the Netherlands, Great Britain and New Zealand often field competitive teams.[55][57] The United States also has had very competitive crews, and in recent years these crews have become even more competitive given the surge in women's collegiate rowing.[58]

The table on the left gives the speed of waves of different wave lengths in deep water. “Deep” in this context is not an absolute value, but is relative to wave length. The simple relationship starts to to breakdown when the depth of the water is less than 1/4 th the wave length. At that depth the bottom exerts sufficient drag on the wave to slow its motion and thus decrease the wavelength [equations and more about wave speed].
Of the four types of rowing machines or ergometers, water rowers are best at reproducing the sensation of on-water rowing. Their stroke cycles hold true to the dynamics of real paddling, and each stroke is punctuated with a splash! Water rowers have sliding seats to allow full-body cardiovascular workouts. (With cheaper rowing machines, in contrast, the seats don’t move.) These fitness machines tend to feature high quality parts and can last a lifetime.
Instead of air or hydraulic resistance, the Elite Wave Water Rowing Machine emulates actual rowing with lifelike water resistance. The paddles glide through the water housed in the reservoir, making the rowing stroke smooth from start to finish, and like rowing on a body of water, the resistance increases infinitely the faster you row. Not only does this feel like rowing on water, it sounds like water. Different stroke speeds and intensities vary water motion, resulting in realistic water resonance.
The most commonly damaged piece of rowing equipment is the skeg, which is a metal or plastic fin that comes out of the bottom of the boat to help maintain stability, and to assist in steering. Since the skeg sticks out below the hull of the boat it is the most vulnerable to damage, however it is relatively easy to replace skegs by gluing a new one on. Hull damage is also a significant concern both for maintaining equipment, and for rower safety. Hull damage can be caused by submerged logs, poor strapping to trailers, and collisions with other boats, docks, rocks, etc.
There are various air rower or water rower techniques, but the most basic one is by starting at the back stroke, the knees should almost be completely straight prior to squeezing the shoulder blades together. Then you pull its handle to the sternum. The back of your body should naturally stay in its arched position when doing the whole movement. Do not forget to take a record of the distance you have made after every session. Some people even take it as far as uploading their results online and see how they are ranked from other people who are also doing the same. You clean learn more about rowing machine technique on this page.
Row your way to fitness with this water rowing machine from WaterRower. The A1 S4 Natural is a low-maintenance exercise machine th...at's constructed from high-quality ash wood with aluminum mono rail. Engineered with the patented WaterFlywheel resistance method, it provides life-like water rowing experience while the low noise level and minimal intrusion along with the unique self-regulating resistance with infinite variable allows suits any user without the need for adjustments. With its no impact and non-load bearing, this gym equipment is also perfect for users with joint problems. Exercise all major muscle groups like the arms, legs, back, shoulders, core, etc. and see how great you're doing with the help of the S4 monitor that comes with the package. It monitors time per 2 or 500 kilometers, watts, calories burned per hour, distance, and the total time of workouts. This exercise machine also boasts minimal maintenance with no lubrication needed. You simply need to add purification tablet every 3-6 months (tablets come with the package). Storage is easy and hassle-free as well. Simply tip the machine vertically and you can easily lean it against a wall or hide it inside a closet. Moreover, enjoy 1 year manufacturer warranty (can be upgraded to 3 years parts and 5 years frame warranty for free with registration) read more
If you are accustomed to the natural catch and feel of on-water rowing, your rowing technique will immediately appreciate the Apollo’s unrivalled emulation of a boat gliding through water. FDF’s patented twin tank design generates a smooth uniform stroke, including no lag of resistance at the catch and continued resistance all the way to the finish.
The Challenge AR has the capability to allow the rower to control and adjust the resistance from “Feather light” to “Olympic sprint” delivering a silky smooth resistance to the user’s effort and instantaneous response to input with no “flat sport”.  With water resistance being the most accurate manner in which to simulate actual outdoor rowing, the Challenge AR provides a smooth and consistent sensation throughout the range of motion of the exercise experience.  

With the smaller boats, specialist versions of the shells for sculling can be made lighter. The riggers in sculling apply the forces symmetrically to each side of the boat, whereas in sweep oared racing these forces are staggered alternately along the boat. The sweep oared boat has to be stiffer to handle these unmatched forces, so consequently requires more bracing and is usually heavier – a pair (2-) is usually a more robust boat than a double scull (2x) for example, and being heavier is also slower when used as a double scull. In theory this could also apply to the 4x and 8x, but most rowing clubs cannot afford to have a dedicated large hull which might be rarely used and instead generally opt for versatility in their fleet by using stronger shells which can be rigged for either sweep rowing or sculling. The symmetrical forces also make sculling more efficient than rowing: the double scull is faster than the coxless pair, and the quadruple scull is faster than the coxless four.


This affordable rowing machine is streamlined, simple to use, built well, has a comfy seat with a realistic rowing movement, and especially good for a newbie. Because the cost of this machine is less than $150, it is popular on the net. As it has a hydraulic rower, resistance is provided by just one piston under the main key column. Along with a comfy cushioned seat, LCD screen, this machine provides 12 hydraulic cylinder resistances.
×