The tank of the WaterRower Oxbridge Rower is made from polycarbonate, one of the strongest plastics available. It is virtually indestructible. The tank is sealed and can be filled with municipal water via a small opening closed by a stopper. This water typically contains enough chlorine to remain clear for some time. After exposure to light, the chlorine will degrade; the chlorine tablets should be added periodically.
The Challenge AR has the capability to allow the rower to control and adjust the resistance from “Feather light” to “Olympic sprint” delivering a silky smooth resistance to the user’s effort and instantaneous response to input with no “flat sport”.  With water resistance being the most accurate manner in which to simulate actual outdoor rowing, the Challenge AR provides a smooth and consistent sensation throughout the range of motion of the exercise experience.  
Rowing has long been recognized as the perfect aerobic pursuit, with naturally smooth and flowing movements that don't tax the joints but do boost the heart rate. Now you can take your rowing experience to the next level with the WaterRower Natural rowing machine. Using the same principles that govern the dynamics of a boat in water, the WaterRower Natural is outfitted with a "water flywheel" that consists of two paddles in an enclosed tank of water that provide smooth, quiet resistance, just like the paddles in an actual body of water. As a result, the machine has no moving parts that can wear out over time (even the recoil belt and pulleys don't require lubricating or maintaining). More significantly, the water tank and flywheel create a self-regulating resistance system that eliminates the need for a motor. As with real rowing, when you paddle faster, the increased drag provides more resistance. When you paddle slower, the resistance is less intense. The only limit to how fast you can row is your strength and your ability to overcome drag. And unlike conventional rowing machines, which tend to be jerky and jarring, the WaterRower Natural is remarkably smooth and fluid.
There is some minor maintenance. Because it's made out of wood, which can expand and contract, the bolts need tightening every few months or so. It's easy and takes only a couple of minutes. That, and putting in a fresh water purification tablet every six to twelve months, are about it for regular maintenance. The only problem I've had with the rower (the reason for 4 stars instead of 5) was a squeak that developed after about 6 weeks. It took me some time to determine the source of the squeak, which was a metal bracket connecting the footrest board to the horizontal boards above the drum. I had to partially disassemble the top section and tighten four bolts, but that fixed the problem and it's been quiet ever since.
Other details include dual rails with four corner wheels that increase seat stability and reduce the amount of sweat buildup; a frame that flips upright for handy storage; and a weight capacity of up to 1,000 pounds. The WaterRower Natural measures 84 by 21 by 22 inches (W x H x D), weighs 117 pounds (with water), and carries a one-year warranty on the frame and components (WaterRower will upgrade the warranty to five years on the frame and three years on the components with the completion of a registration form).
Other details include dual rails with four corner wheels that increase seat stability and reduce the amount of sweat buildup; a frame that flips upright for handy storage; and a weight capacity of up to 1,000 pounds. The WaterRower Natural measures 84 by 21 by 22 inches (W x H x D), weighs 117 pounds (with water), and carries a one-year warranty on the frame and components (WaterRower will upgrade the warranty to five years on the frame and three years on the components with the completion of a registration form).
The breathtaking Henley Room is situated along the shores of Lake Ontario in the historical Argonaut Rowing Club. With more than 2600 sq. and a 75 ft. patio terrace, both offer a magnificent view of the lake. Our spacious bar area is decorated with a plethora of historic rowing memorabilia which provides your guests a comfortable, relaxing and enjoyable setting.
A bumps race is a multi-day race beginning with crews lined up along the river at set intervals. They start simultaneously and all pursue the boat ahead while avoiding being bumped by a boat from behind. If a crew overtakes or makes physical contact with the crew ahead, a bump is awarded. As a result, damage to boats and equipment is common during bumps racing. To avoid damage the cox of the crew being bumped may concede the bump before contact is actually made. The next day, the bumping crew will start ahead of any crews that have been bumped. The positions at the end of the last race are used to set the positions on the first day of the races the next year. Oxford and Cambridge Universities hold bumps races for their respective colleges twice a year, and there are also Town Bumps races in both cities, open to non-university crews. Oxford's races are organised by City of Oxford Rowing Club[41] and Cambridge's are organised by the Cambridgeshire Rowing Association.

Because of the vast array of products that might contain one of the chemicals or ingredients on the list, we must include Proposition 65 warnings in our communications with you. We are required to use exact wording as specified by the state of California. While the warning sounds alarming, the purpose is to notify you of the potential risk so that you can make an informed buying decision.


The stake format was often used in early American races. Competitors line up at the start, race to a stake, moored boat, or buoy some distance away, and return. The 180° turn requires mastery of steering. These races are popular with spectators because one may watch both the start and finish. Usually only two boats would race at once to avoid collision. The Green Mountain Head Regatta continues to use the stake format but it is run as a head race with an interval start.[42] A similar type of racing is found in UK and Irish coastal rowing, where a number of boats race out to a given point from the coast and then return fighting rough water all the way. In Irish coastal rowing the boats are in individual lanes with the races consisting of up to 3 turns to make the race distance 2.3 km.
Flywheel sits in enclosed water tank to provide smooth, quiet, self-regulated resistanceSeries 4 performance monitor tracks workou...t intensity, stroke rate, heart rate, and moreHandcrafted rowing machine with "water flywheel" that replicates actual rowing feelStores upright; measures 83 x 22 x 21 inches (L x W x H) and weighs 108 poundsNo impact and Non-Load Bearing, perfect for users with Joint concerns read more

WaterRower is made in the USA using hardwood from only replenishable sources. WaterRower strives to manufacture rowing machines that are of a stylish design and built to last, while maintaining our commitment to eco-friendliness. Our WaterRower Rowing Machines are functional fitness furniture, designed not to be hidden away like other unsightly gym equipment, but to look at home in your living room. Storing the waterrower in an upright position no wider than a dining room chair, our rowing machines can be easily laid out for a quick indoor rowing exercise session. Order your WaterRower from FitnessZone.com!
Racing boats are stored in boat houses. These are specially designed storage areas which usually consist of a long two-story building with a large door at one end which leads out to a pontoon or slipway on the river or lakeside. The boats are stored on racks (horizontal bars, usually metal) on the ground floor. Oars, riggers, and other equipment is stored around the boats. Boat houses are typically associated with rowing clubs and include some social facilities on the upper floor: a cafe, bar, or gym.

WaterRower is made in the USA using hardwood from only replenishable sources. WaterRower strives to manufacture rowing machines that are of a stylish design and built to last, while maintaining our commitment to eco-friendliness. Our WaterRower Rowing Machines are functional fitness furniture, designed not to be hidden away like other unsightly gym equipment, but to look at home in your living room. Storing the waterrower in an upright position no wider than a dining room chair, our rowing machines can be easily laid out for a quick indoor rowing exercise session. Order your WaterRower from FitnessZone.com!
Water Rower Dimensions: 82.25" x 22.25" x 19.63" / Weight: 88 Lbs (Empty Tank), 125 Lbs (With 171 Liters Of Water) ; Maximum User ...Weight And Height: 1000 Lbs & 38" InseamExercise Rower Features Stainless Steel Makeup With Brushed Stainless Steel Finish For High DurabilityBoasts Patented Water Flywheel Responsible For Its Natural Rowing Dynamic-Like Actually Driving A Boat With Oars! Other Features: Self-Regulating Resistance Levels-Making It Suitable For Any User, Little Maintenance Required (Tablets Available From Manufacturer Free Of Charge) And Inclusive Of S4 Performance Monitor (Displays Intensity, Kcalories/Hour, Stroke Rate, Heart Rate, And More! Enjoy 1 Year Commercial Warranty (Upgradeable To 3-Year Parts While 5-Year Frames Are Free Of Charge With Registration) read more
You are eligible for a full refund if no ShippingPass-eligible orders have been placed. You cannot receive a refund if you have placed a ShippingPass-eligible order. In this case, the Customer Care team will remove your account from auto-renewal to ensure you are not charged for an additional year and you can continue to use the subscription until the end of your subscription term.

WaterRower Rowing Machines offer a pleasant rowing exercise while holding true to the dynamics of on-water rowing; burn up to 1000 calories an hour and work up to 84 percent of your muscle mass! Rowing provides an effective, high-intensity, cardio workout, while maintaining a low-impact to the joints. Workout at your own pace as the WaterFlyWheel's self-regulating resistance dynamically adjusts to each of your strokes. Unlike common ergometers, to change resistance on a WaterRower rowing machine you simply row harder!
Our Wooden Rowing Machines are Made in the USA using hardwood from only replenishable sources. We strive to manufacture rowing machines that are of a stylish design and built to last, while maintaining our commitment to eco-friendliness. Our Rowing Machines are functional fitness furniture, designed not to be hidden away like other unsightly gym equipment, but to look at home in your living room. Storing in an upright position no wider than a dining room chair, our rowing machines can be easily laid out for a quick indoor rowing exercise session. 
×