Wood is used for its unique visual appeal, but also for its ability to absorb sound vibration for smooth, quiet operation, as well as it's stable longevity. The Club edition rowing machine is handcrafted in solid ash wood and stained for color. It has been designed for high traffic or commercial areas, and its black rails have been styled to prevent scuffing. The other wooden components are finished in an attractive rosewood which is more resistant to soiling than the Natural model. Each machine has also been hand finished with Danish Oil and Urethane for protection.
Assembly was challenging. One of the rails could not be attached because the embedded screw in the cross-beam was too crooked to fit into the hole on the rail. I had to place a nut on it to protect the screws and tap until it was true enough cap nut to be attached. The foot board is slightly wider than the top board. I will sand this to match when I reapply the finish. This will need to be done because the wood has a dry, ashy appearance. The wood is beautiful and mostly uniform. This rowing machine is a nice product, but the build quality of the unit I received was disappointing. I felt lucky that the gashes in the carton did not damage the product as the packaging was optimistic. The leading competitor I use at the gym seems to provide slightly more resistance. It is beautiful and useful, but with room for improvement.
Products listed as Out of Stock are currently not in stock at the store(s) being viewed. Note that in some instances, very limited inventory may be available in stores, but because of small quantities we are unable to reflect the availability online. Please remember to check back – if or when inventory is replenished and available, this will be reflected online.

A rowing workout can produce sustainable results without negatively impacting muscles and joints. With a reported average of five hundred to a thousand calories burned per workout, rowing machines are the hottest new fitness trend in the industry. Because of this, manufacturers are working overtime to produce a wide variety of styles and types of row machines, all of which can offer an effective low-impact total body workout. With so many choices of models, it can be confusing for beginners to choose the right type. Most consumers automatically choose the cheapest rower, however, cheaper models often feature piston resistance, which is considered the worst type of technology because the workouts are uncomfortable and the machine itself is often poorly designed.

Rowing machines were first used in Archaic Greece. Chabrias, an Athenian military general in 4th Century B.C., invented wooden rowing simulators for his inexperienced oarsmen. This enabled them to learn technique and timing before stepping foot on actual water crafts. And it must have worked — Chabrias successfully led numerous naval attacks against the Spartans.
The WaterRower Natural is handcrafted in solid ash and stained honey oak for consistency of color. The wood was chosen due to its marvelous engineering properties, especially its ability to absorb sound and vibration, which enhances the WaterRower's quiet performance and smooth operation. Ash, like all woods used in the construction of the WaterRower, is a premium hardwood with incredible longevity and dimensional stability. In addition, the wood is harvested from replenishable forests and is hand finished with Danish oil to provide a deep luster.
The next time this happens try being more aggressive in leaning into the wave, but more importantly, you get your down-hill oar out of the water early. You can push the up-hill oar into the water to stablize the boat and prevent rolling too far in that direction. The water will be pulling your boat and oar tip in opposite directions here, so you won’t get trapped like you did before with the down-hill oar.
WaterRower Dimensions: 83" x 22" x 21" / Weight: 108 Lbs (At Minimum Water Level)Built For Light Commercial Use & Practically Main...tenance Free, Rowing Machine Targets All Major Muscle Groups (84% Of Total Muscle Mass) W/ Excellent Adjustable Resistance LevelsMade W/ Kiln Dried Harwood; Danish Oil & Urethane Finish For Better Wood Performance/Strength & Cozy Feel To Your GymBoasts A Patented Water Flywheel That Mimics The Natural Dynamics Of Rowing Yet Suitable For Users W/ Joint Concerns (Chlorine Tablet Is Available Free Of Charge)Enjoy 1 Year Manufacturer's Warranty (Upgradeable To 3-Year Parts While 5-Year Frame Is Free Of Charge W/ Registration) read more
According to fitness experts, water resistance is by far the most efficient technology used in a rowing machine, and the result is a realistic rowing experience that provides a better workout with smoother and more fluid rowing. These machines use a paddle that’s suspended in a tank of water, providing a realistic sensation of rowing outdoors. Extremely quiet running, as you row the only sound you’ll hear is the gentle splashing of water moving with each stroke, which serves to enhance the realistic experience of this style of rower.
The WaterRower Club Rower has been designed for high traffic areas such as commercial gyms, studios, rehabilitation clinics, etc. Its black rails have been styled to prevent scuffing; other wooden components are finished in an attractive rosewood which are more resistant to soiling than the natural model. Each machine has been hand finished with Danish oil and urethane for protection. Wood has been chosen due to its marvelous engineering properties, primary amongst these is its ability to absorb sound and vibration enhancing the waterrower's quietness and smoothness of use. Ash, like all woods used in WaterRower construction, is a premium hardwood with incredible longevity and dimensional stability. For reasons of ecology, all WaterRower woods are harvested from replenishable forests. WaterRower Club Rower Black Rails have been styled to prevent scuffing, other wooden components are finished in an attractive rosewood which are more resistant to soiling than the Natural model.

The WaterRower Club is hand crafted in solid Ash and stained for color. The WaterRower Club has been designed for High Traffic Areas such as Commercial Gyms, Studios, Rehabilitation Clinics, etc. Its Black Rails have been styled to prevent scuffing, other wooden components are finished in an attractive rosewood which is more resistant to soiling than the Natural model.


If the machine is to be housed on a wooden floor you will need a mat beneath to reduce vibration and also noise. If space is tight, the hydraulic options are usually the smallest. It's also worth checking your floor can take the weight if you're going for one of the bigger, heavier models. For most, this shouldn't be a problem, if you have any doubts get a surveyor to check as it could be a very expensive mistake!
At the catch the rower places the blade in the water and applies pressure to the oar by pushing the seat toward the bow of the boat by extending the legs, thus pushing the boat through the water. The point of placement of the blade in the water is a relatively fixed point about which the oar serves as a lever to propel the boat. As the rower's legs approach full extension, the rower pivots the torso toward the bow of the boat and then finally pulls the arms towards his or her chest. The hands meet the chest right above the diaphragm.
The coxswain (or simply the cox) is the member who sits in the boat facing the bow, steers the boat, and coordinates the power and rhythm of the rowers - by communicating to the crew through a device called a cox box and speakers. They usually sit in the stern of the boat, except in bowloaders where the coxswain lies in the bow. Bowloader are usually seen as the coxed four and coxed pair type of boat.
In addition to this, certain crew members have other titles and roles. In an 8+ the stern pair are responsible for setting the stroke rate and rhythm for the rest of the boat to follow. The middle four (sometimes called the "engine room" or "power house") are usually the less technical, but more powerful rowers in the crew, whilst the bow pair are the more technical and generally regarded as the pair to set up the balance of the boat. They also have most influence on the line the boat steers.
Modern rowing as a competitive sport can be traced to the early 10th century when races were held between professional watermen on the River Thames in London, United Kingdom. Often prizes were offered by the London Guilds and Livery Companies. Amateur competition began towards the end of the 18th century with the arrival of "boat clubs" at the British public schools of Eton College, Shrewsbury School, and Westminster School. Similarly, clubs were formed at the University of Oxford, with a race held between Brasenose College and Jesus College in 1815. At the University of Cambridge the first recorded races were in 1827. Public rowing clubs were beginning at the same time; in England Leander Club was founded in 1818, in Germany Der Hamburger und Germania Ruder Club was founded in 1836 and in the United States Narragansett Boat Club was founded in 1838 and Detroit Boat Club was founded in 1839. In 1843, the first American college rowing club was formed at Yale University.

For a third option, you can look to hydraulic machines, which use pistons to generate resistance. Hydraulic rowers are quiet, and they also tend to be smaller and cheaper than other kinds of rowing machines, but you won’t get the same smooth rowing feel, or the consistency of resistance, that you would get with an air or water rower. What's more, reviewer after reviewer has found them unreliable and high-maintenance.
Con's: Super bummed that for $1160 they couldn't include an internal ANT+ transponder and Heart Rate strap(sub $100 package). The foot straps are crap! Within the first 1000m of moderate rowing they loosen to the point of being able to pull foot out on Recovery of stroke(Yes, even with ball of foot down). I really wish the WaterCoach F.I.T. software for the S4 Monitor was macOS compatible. It'd be nice to able to customer program workouts on my MacBook Pro or iMac.
The WaterRower Classic Rower is unsurpassed in terms of design refinement. WaterRower Classic Rower has a patented WaterFlywheel design emulates rowing like no machine before it. Smooth, silent and storing conveniently upright the WaterRower Classic Rower is perfect for any user and in any environment. The WaterRower Classic Rower has an unique patented WaterFlywheel has been designed to emulate the dynamics of a boat moving through water.
In the rowing machine category, there are a lot of models to chose from. They range in price from under $100 to well over $1500.  As you can imagine, you’re getting a different type of row machine at those ends of the spectrum, but within that variety there’s something for everyone.  To help guide you, we’ve listed our favorite row machine models and brands by price below:
The WaterRower Natural is handcrafted from solid Ash wood, finished with a honey oak stain and danish oil. The WaterRower's patented WaterFlywheel has been specifically designed to emulate the dynamics of a boat moving though water and is unsurpassed in its simulation of the physical and physiological benefits of rowing. WaterRower will not provide support or documentation for any product transported outside of the original country of purchase
In the empty-lung technique, rowers inhale during the drive, and exhale during the recovery so that they have empty lungs at the catch. Because the knees come up to the chest when the lungs are empty, this technique allows the rower to reach a little bit further than if the lungs were full of air. Full lungs at the release also can help the rower to maintain a straighter back, a style encouraged by many coaches.
The rowing machine itself is unlike any other on the market with its patented water filled flywheel. It is hard to exactly copy the action of a scull on the water, but the mechanics of the flywheel spinning in water comes in a close second on dry land. The fact that the water is 800 times denser than air means that there is no need for any extra resistance or dampening that you will find in normal air rowers. The faster you pull, the more resistance is generated giving it infinite variability. However, if you want to be able to practice rowing with a faster stroke, you will have to reduce the amount of water in the tank unlike an air rower where you just have to adjust the baffle.
×