If you are anything like me, you read the negative reviews to see what some of the complaints could potentially be...I have found none that match with my machine or experience so far. The boxes it came in were a little bunged-up but everything on the inside was perfect. Only took about 15-20 minutes to build (first time building a row machine) and another 5-10 to fill with water. We used it for a little while before we added the danish oil.
In deep water the speed (or velocity) of a water wave depends only on its wave length. Specifically, the speed is proportional to the square root of the wavelength. Thus, the longer the wave length, the faster the wave, or vice versa. The speed of a single wave is called the phase speed. Amazingly, the speed of a packet of waves (the group speed) is often not the same.
The WaterRower Club is hand crafted in solid Ash and stained for color. The WaterRower Club has been designed for High Traffic Areas such as Commercial Gyms, Studios, Rehabilitation Clinics, etc. Its Black Rails have been styled to prevent scuffing, other wooden components are finished in an attractive rosewood which is more resistant to soiling than the Natural model.
You are eligible for a full refund if no ShippingPass-eligible orders have been placed. You cannot receive a refund if you have placed a ShippingPass-eligible order. In this case, the Customer Care team will remove your account from auto-renewal to ensure you are not charged for an additional year and you can continue to use the subscription until the end of your subscription term.
If you're looking at a WaterRower, you're probably also considering the Concept2. They're both great machines, but which you choose depends on your needs. I think the WaterRower is ideal for most people, but not everyone. The WaterRower has a number of advantages vs the Concept 2 - it is quieter, the mechanism up front is lower profile, it has a comfortable seat, it is much better looking, it's easier to stand up when you're not rowing and it's just ... zen-like. There is something about the smoothness of the WaterRower that makes it a joy to use, and because it's quiet you can easily stream your favorite binge-series without cranking the volume too high.
Head races are time trial / processional races that take place from autumn (fall) to early spring (depending on local conditions). Boats begin with a rolling start at intervals of 10 – 20 seconds, and are timed over a set distance. Head courses usually vary in length from 2,000 metres (1.24 mi) to 12,000 metres (7.46 mi), though there are longer races such as the Boston Rowing Marathon and shorter such as Pairs Head.
The WaterRower Club is hand crafted in solid Ash and stained for color. The WaterRower Club has been designed for High Traffic Areas such as Commercial Gyms, Studios, Rehabilitation Clinics, etc. Its Black Rails have been styled to prevent scuffing, other wooden components are finished in an attractive rosewood which is more resistant to soiling than the Natural model.
At the catch the rower places the blade in the water and applies pressure to the oar by pushing the seat toward the bow of the boat by extending the legs, thus pushing the boat through the water. The point of placement of the blade in the water is a relatively fixed point about which the oar serves as a lever to propel the boat. As the rower's legs approach full extension, the rower pivots the torso toward the bow of the boat and then finally pulls the arms towards his or her chest. The hands meet the chest right above the diaphragm.

After reading so many fantastic reviews I purchased the Classic model. Before I write what I think are the negative aspects I'll say that it gives a great workout! That is pretty obvious and I don't think that part is arguable. The disappointment began while unpacking. The wood parts were wrapped fairly well and did not have damage but there were several scratches that I had to sand out and re-oil. It appears that they were there before shipping. Putting it together would have been fast and easy- except 2 of the bolts were bent at about 15 degrees and would not fit. I had to wrap with tape and bend with vice grips. After getting it all together the rower worked well for about a week. I started to notice an annoying kind of popping sound from the left rail as the wheels rolled over on each stroke and recovery. It seems the plastic that the wheels ride on is not flat or adhered well to the rail. It isn't very loud but I can hear it well and it gets my attention, spoiling the nice sound of the water. Really disturbing. Support at WaterRower would like a video of the issue. Seems like an obvious issue and could swap out with a rail that is good instead of me trying to make a video of this small sound while moving the seat back and forth. For a $1500 machine the quality control- or lack of it is disturbing. Having to jump through a bunch of hoops because they are too cheap to just send a part is even more so. Perhaps I am being difficult but it is upsetting to have something touted as so great but put together like a $200 piece of junk. Another complaint would be the lack of any back lighting on the monitor. Really cannot see it if the lights are low. Being able to remove the monitor to attach to a PC wouldn't hurt either. While it gives a good workout the rower really suffers from poor manufacturing.

Rowing machines were first used in Archaic Greece. Chabrias, an Athenian military general in 4th Century B.C., invented wooden rowing simulators for his inexperienced oarsmen. This enabled them to learn technique and timing before stepping foot on actual water crafts. And it must have worked — Chabrias successfully led numerous naval attacks against the Spartans.
Unfortunately, the direction of water movement at the top and bottom of the wave (thick arrows) rotate the boat in the direction you don’t want to go. As you realize this you try to pull your down-hill oar up out of the water, but this just pulls you over more in the bad direction. I spare you, gentle reader, a picture of the result. As the wave carries your boat up to a crest you try to lean into it to keep the boat level, but it’s natural to also push down on the down-hill oar to help.

Unlike traditional rowboats or kayaks, sliding seat rowing shells are quality fitness tools that allow you a low-impact, all-over body workout. Our versatile shells are simple to operate, stable in open water conditions, and effective in providing you with a fun, safe workout, whether you are a novice or an experienced rower. Our unique folding riggers and long Delta keel make our boats portable and easy to launch.
At the junior level (in the United States), regattas require each rower to weigh in at least two hours before their race; they are sometimes given two chances to make weight at smaller regattas, with the exception of older more prestigious regattas, which allow only one opportunity to make weight. For juniors in the United States, the lightweight cutoff for men is 150.0 lb.; for women, it is 130.0 lb. In the fall the weight limits are increased for women, with the cutoff being 135 lb.

The breathtaking Henley Room is situated along the shores of Lake Ontario in the historical Argonaut Rowing Club. With more than 2600 sq. and a 75 ft. patio terrace, both offer a magnificent view of the lake. Our spacious bar area is decorated with a plethora of historic rowing memorabilia which provides your guests a comfortable, relaxing and enjoyable setting.
The WaterRower US office got in on the Pull for a Cure fundraising action and all pulled together to raise money for breast cancer! - - - - As many of you may already know, throughout the month of October, WaterRower has been raising money through our Pull for a Cure fundraiser. For each 500m workout rowed and posted online, we'll be donating $1 towards breast cancer research! Don't forget to get your workouts in before Monday, October 31st! #PullForaCure #WaterRower
The distinction between rowing and other forms of water transport, such as canoeing or kayaking, is that in rowing the oars are held in place at a pivot point that is in a fixed position relative to the boat, this point is the load point for the oar to act as a second class lever (the blade fixed in the water is the fulcrum). In flatwater rowing, the boat (also called a shell or fine boat) is narrow to avoid drag, and the oars are attached to oarlocks ( also called gates ) at the end of outriggers extending from the sides of the boat.[8] Racing boats also have sliding seats to allow the use of the legs in addition to the body to apply power to the oar.
At the collegiate level (in the United States), the lightweight weight requirements can be different depending on competitive season. For fall regattas (typically head races), the lightweight cutoff for men is 165.0 lb. and 135.0 lb. for women. In the spring season (typically sprint races), the lightweight cutoff for men is 160.0 lb., with a boat average of 155.0 lb. for the crew; for women, the lightweight cutoff is 130.0 lb.[48]
* While there is nothing to adjust from row to row on the WaterRower, it is possible to increase or decrease the level of resistance by changing how much water you put in the drum. The monitor is pre-calibrated to match 17 liters of water, but you can change that if you want. More than 17 liters = more resistance, up to the max fill line. This is not something you'll want to change frequently, it's more of a set-it-and-forget-it thing.
Waterrower dimensions: 83'' x 22'' x 21'' / weight: 108 lbs (at minimum water level)built for home use and practically maintenance... free, rowing machine targets all major muscle groups (84% of total muscle mass) w/ excellent adjustable resistance levelsmade of kiln dried harwood for better wood strength and performance; has honey oak finish that goes well w/ other home furnitureboasts a patented water flywheel that mimics the natural dynamics of rowing yet suitable for users w/ joint concerns (chlorine tablet is available free of charge)enjoy 1 year manufacturer's warranty (upgradeable to 3-year parts while 5-year frame is free of charge w/ registration)comes w/ the s4 performance monitor for quickstart of functions and displays intensity, kcalories per hour, strokerate, heartrate, and more!Storage dimensions: 21'' x 22'' x 83'' (easily store it on end)entry height is at 12'' (at 20'' w/ optional hi-rise adaptor)noise/intrusion levels: soothing and relaxing/minimal read more

A rowing workout can produce sustainable results without negatively impacting muscles and joints. With a reported average of five hundred to a thousand calories burned per workout, rowing machines are the hottest new fitness trend in the industry. Because of this, manufacturers are working overtime to produce a wide variety of styles and types of row machines, all of which can offer an effective low-impact total body workout. With so many choices of models, it can be confusing for beginners to choose the right type. Most consumers automatically choose the cheapest rower, however, cheaper models often feature piston resistance, which is considered the worst type of technology because the workouts are uncomfortable and the machine itself is often poorly designed.
The rowing machine itself is unlike any other on the market with its patented water filled flywheel. It is hard to exactly copy the action of a scull on the water, but the mechanics of the flywheel spinning in water comes in a close second on dry land. The fact that the water is 800 times denser than air means that there is no need for any extra resistance or dampening that you will find in normal air rowers. The faster you pull, the more resistance is generated giving it infinite variability. However, if you want to be able to practice rowing with a faster stroke, you will have to reduce the amount of water in the tank unlike an air rower where you just have to adjust the baffle.
×