The recovery phase follows the drive. The recovery starts with the extraction and involves coordinating the body movements with the goal to move the oar back to the catch position. In extraction, the rower pushes down on the oar handle to quickly lift the blade from the water and rapidly rotates the oar so that the blade is parallel to the water. This process is sometimes referred to as feathering the blade. Simultaneously, the rower pushes the oar handle away from the chest. The blade emerges from the water square and feathers immediately once clear of the water. After feathering and extending the arms, the rower pivots the body forward. Once the hands are past the knees, the rower compresses the legs which moves the seat towards the stern of the boat. The leg compression occurs relatively slowly compared to the rest of the stroke, which affords the rower a moment to recover, and allows the boat to glide through the water. The gliding of the boat through the water during recovery is often called run.
Designed with an obsession for detail, the WaterRower Classic Rower is unmatched by any other fitness equipment. The overriding design philosophy of the WaterRower has achieved "beauty by simplicity". Every detail has been resolved to compliment the overall appearance and performance of the machine. Order your WaterRower Natural Ash Rower from FitnessZone.com today!
The water flywheel is comprised of two paddles encased in an enclosed tank of water. As you pull the cable, the paddles move through the water creating resistance. The beauty of this machine is it uses the mass/density of water. The paddles create the drag, so the harder you pull, the more resistance increases. Think about moving your hands through water. The faster you go, the more dense water feels. The slower you go, the less you feel the resistance. And this type of resistance is excellent for your joints. Click here to read the full review.
The OMNI T1X next-generation, cutting-edge, gold standard touring class open water and coastal rowing shell is available for purchase spring 2015!   The new OMNI T1X is 19' long with significant design updates to row and track well on flat water as well as be the ultimate performance and safe rowing shell rowing through chop, wake and swells found on magnificent large bodies of water.   We've modeled the OMNI T1X after the best features of U.S. manufactured open water shells and built-in the efficient, self-bailing open transom found in all European built Coastal Rowing Shells. The OMNI T1X is a versatile, adjustable shell accommodating both tall and short rowers of varying weights.  You'll find the slightly uplifted bow shape slicing through chop with ease, the self-bailing open transom efficiently shedding water against the roughest conditions; the long, tapered built-in keel tracking well and the hull shape & stabiity necessary to catch, lock-on and drive past the competition in the roughest of open water stretches. Meeting the maximum length for Open Water Competition Touring Class shells at 19', the new OMNI T1X is light, stiff and ready to deliver optimal performance for our most competitive endurance rowers and a boat to last a life-time for recreation and fitness rowers. 
A bumps race is a multi-day race beginning with crews lined up along the river at set intervals. They start simultaneously and all pursue the boat ahead while avoiding being bumped by a boat from behind. If a crew overtakes or makes physical contact with the crew ahead, a bump is awarded. As a result, damage to boats and equipment is common during bumps racing. To avoid damage the cox of the crew being bumped may concede the bump before contact is actually made. The next day, the bumping crew will start ahead of any crews that have been bumped. The positions at the end of the last race are used to set the positions on the first day of the races the next year. Oxford and Cambridge Universities hold bumps races for their respective colleges twice a year, and there are also Town Bumps races in both cities, open to non-university crews. Oxford's races are organised by City of Oxford Rowing Club[41] and Cambridge's are organised by the Cambridgeshire Rowing Association.

WaterRower Dimensions: 83" x 22" x 21" / Weight: 108 Lbs (At Minimum Water Level)Built For Light Commercial Use & Practically Main...tenance Free, Rowing Machine Targets All Major Muscle Groups (84% Of Total Muscle Mass) W/ Excellent Adjustable Resistance LevelsMade W/ Kiln Dried Harwood; Danish Oil & Urethane Finish For Better Wood Performance/Strength & Cozy Feel To Your GymBoasts A Patented Water Flywheel That Mimics The Natural Dynamics Of Rowing Yet Suitable For Users W/ Joint Concerns (Chlorine Tablet Is Available Free Of Charge)Enjoy 1 Year Manufacturer's Warranty (Upgradeable To 3-Year Parts While 5-Year Frame Is Free Of Charge W/ Registration) read more


The WaterRower Classic is hand crafted in solid American Black Walnut. Like all woods, Black Walnut may vary in color from a rich brown to purple-black. Each machine has been hand finished with three coats of Danish Oil giving a deep lustre an warmth to the wood. Wood has been chosen due to its marvellous engineering properties, primary amongst these is its ability to absorb sound and vibration enhancing the WaterRower's quietness and smoothness of use. Black Walnut, like all woods used in WaterRower construction, is a premium hardwood with incredible longevity and dimensional stability. For reasons of ecology, all our woods are harvested from replenishable forests.

By charter, the Schuylkill Navy’s object is "to secure united action among the several Clubs and to promote amateurism on the Schuylkill River."[23] Over the years, the group has had a role in certain ceremonial and state functions.[24] The success of the Schuylkill Navy and similar organizations contributed heavily to the extinction of professional rowing and the sport's current status as an amateur sport.[25]

Wave water resistance feels and sounds like rowing on the water. Water resistance provides a dynamic rowing stroke with infinite resistance levels. Siphon included for filling and removing water from reservoir. Wide, molded seat for comfort. Ball-bearing rollers for smooth seat gliding. Multi-function monitor provides instant feedback on your workout. Padded, textured rowing handle for better grip. Pivoting footplates with adjustable strap to secure feet. Folding frame for storage. Wheels for transport. Leveling endcaps with dial to ensure stability. Nylon rowing strap. Blue water tank. Padded seat. Targeted training: Full body strength and cardio. Weight capacity: 300 lbs.. Warranty: Three years on frame and 90 days on parts. Made from steel. Black finish. Minimal assembly required. 85.35 in. L x 20.25 in. W x 33.75 in. H (71.7 lbs.). Instruction Manual. Real Water Resistance: Because the Stamina Wave Water Rowing Machine incorporates water resistance, users will truly feel as though they are out on the lake or river. Water resistance makes the rowing stroke smoother and more consistent, but most importantly, it offers infinite resistance. Just like rowing on water, faster, harder pushes increase the resistance. To further increase or decrease the resistance, you can add or remove water with the included siphon. Even more, water in the reservoir mimics the sound of moving water, which makes the indoor rowing experience more lifelike. Built to Endure While Building Endurance: The Wave Water Rowing Machine is built to last no matter how often you use it. With steel frame construction and rowing beam, the rower can withstand years of prolonged, intense use. Even more, the sturdy, pivoting footplates with straps keep you secure during your workout while the rower itself is stabilized on leveling endcaps with dials. To further motivate you, the rower also comes equipped with a multi-function monitor that tracks dis

Rowing is a low impact sport with movement only in defined ranges, so twist and sprain injuries are rare. However, the repetitive rowing action can put strain on knee joints, the spine and the tendons of the forearm, and inflammation of these are the most common rowing injuries. [9]If one rows with poor technique, especially rowing with a curved rather than straight back, other injuries may surface, including back pains. Blisters occur for almost all rowers, especially in the beginning of one's rowing career, as every stroke puts pressure on the hands, though rowing frequently tends to harden hands and generate protective calluses. Holding the oars too tightly or making adjustments to technique may cause recurring or new blisters, as it is common to feather the blade (previously described). Another common injury is getting "track bites", thin cuts on the back of one's calf or thigh caused by contact with the seat tracks at either end of the stroke.
At the collegiate level (in the United States), the lightweight weight requirements can be different depending on competitive season. For fall regattas (typically head races), the lightweight cutoff for men is 165.0 lb. and 135.0 lb. for women. In the spring season (typically sprint races), the lightweight cutoff for men is 160.0 lb., with a boat average of 155.0 lb. for the crew; for women, the lightweight cutoff is 130.0 lb.[48]
Infinitely Variable Resistance: The benefit of a water resistance rower is that it most closely simulates a boat moving through water. When rowing the resistance is due to the effect of fluid drag acting on the boat. Go faster, resistance increases. Go slower resistance decreases. Importantly, the user chooses; regardless of age, gender, size or fitness. The WaterRower M1 LoRise's patented WaterFlywheel emulates this naturally self-paced benefit of rowing. This is a workout you can start benefitting from immediately, regardless of experience!
The meter didn't work properly. It wasn't keeping the distance - we would row for 30 mins and wouldn't even be at 1km!!! And the strokes per minute was reading double strokes (which the company said was normal - huh?). Their customer service team was good and tried to make it work but we ended up returning it and spent the extra money to get a WaterRower and it is amazing!!!
Storage is also a plus point for the Waterrower series as they are all designed to stand upright with the tank acting as ballast for stability. In this position they only take up around two square feet. Again, great if you are planning on training in the living room. However, if you have small children, I would advise fixing the top to the wall with a hook and strap.
The machine is well constructed for a consumer device. The control panel does not accurately measure distance. It's off tenfold. I've contacted the manufacture about the issue and first I was told it should only be used for comparison purposes, then I was told it would be too expensive to provide a product that didn't show 1 km as 0.1km. Yes, these are ridiculous excuses.
Con's: Super bummed that for $1160 they couldn't include an internal ANT+ transponder and Heart Rate strap(sub $100 package). The foot straps are crap! Within the first 1000m of moderate rowing they loosen to the point of being able to pull foot out on Recovery of stroke(Yes, even with ball of foot down). I really wish the WaterCoach F.I.T. software for the S4 Monitor was macOS compatible. It'd be nice to able to customer program workouts on my MacBook Pro or iMac.
Instead of air or hydraulic resistance, the Elite Wave Water Rowing Machine emulates actual rowing with lifelike water resistance. The paddles glide through the water housed in the reservoir, making the rowing stroke smooth from start to finish, and like rowing on a body of water, the resistance increases infinitely the faster you row. Not only does this feel like rowing on water, it sounds like water. Different stroke speeds and intensities vary water motion, resulting in realistic water resonance.
Blades, otherwise known as oars to amateurs or non rowers, are used to propel the boat. They are long (sculling: 250–300 cm; sweep oar: 340–360 cm) poles with one flat end about 50 cm long and 25 cm wide, called the blade. Classic blades were made out of wood, but modern blades are made from more expensive and durable synthetic material, the most common being carbon fiber.
The Challenge AR has the capability to allow the rower to control and adjust the resistance from “Feather light” to “Olympic sprint” delivering a silky smooth resistance to the user’s effort and instantaneous response to input with no “flat sport”.  With water resistance being the most accurate manner in which to simulate actual outdoor rowing, the Challenge AR provides a smooth and consistent sensation throughout the range of motion of the exercise experience.  

The WaterRower Natural rowing machine is handcrafted in solid ash wood, stained Honey Oak, and finished with Danish oil. Wood is an excellent material for this application due to its ability to absorb sound and vibration enhancing the WaterRower's smooth, quiet operation. The Natural, as with all WaterRowers, features patented WaterFlywheel technology, unrivaled in its replication of the resistance felt in on the water rowing.
As Stamina’s first water rower, the Wave Water Rowing Machine 1445 has all the necessities for a realistic, effective workout. Rowing on this machine feels and sounds like rowing in real life, making this a great option for those who are seeking an affordable water rower for indoor training. But even if you aren’t an avid oarsman or oarswoman, this machine truly offers a total body cardiovascular workout that’s enjoyable for everyone.

Water Rower Dimensions: 88" x 22" x 20" / Weight: 74 Lbs (Empty Tank), 111 Lbs (With Water); Maximum User Weight And Height: 700 L...bs & 38" InseamExercise Rower Features Aluminum Makeup With Powder-Coated Aluminum Finish For High DurabilityBoasts Patented Water Flywheel Responsible For Its Natural Rowing Dynamic-Like Actually Driving A Boat With Oars! Other Features: Self-Regulating Resistance Levels-Making It Suitable For Any User, Little Maintenance Required (Tablets Available From Manufacturer Free Of Charge) And Inclusive Of S4 Performance Monitor (Displays Intensity, Kcalories/Hour, Stroke Rate, Heart Rate, And More! Enjoy 1 Year Commercial Warranty (Upgradeable To 3-Year Parts While 5-Year Frames Are Free Of Charge With Registration) read more
In addition to this, certain crew members have other titles and roles. In an 8+ the stern pair are responsible for setting the stroke rate and rhythm for the rest of the boat to follow. The middle four (sometimes called the "engine room" or "power house") are usually the less technical, but more powerful rowers in the crew, whilst the bow pair are the more technical and generally regarded as the pair to set up the balance of the boat. They also have most influence on the line the boat steers.
Bring the experience and benefits of rowing on water with this professionally-built Stamina water rower machine. The incorporated water resistance in this exercise machine offers smoother and more consistent rowing but more importantly, just like rowing in an actual body of water, this workout machine is built to provide infinite resistance--harder and faster rowing motions cause increased resistance. To tailor the resistance according to your fitness goals, simply increase or decrease water level using the siphon included in the package. Moreover, the steel frame construction and rowing beam ensure durability for years while the sturdy, pivoting footplates with straps offer comfort and security. To help you keep track of your fitness progress, this home gym machine is also equipped with a multi-function monitor that tracks total strokes, strokes per minute, distance, time, and calories burned. Other features include: wide molded seat, textured and padded handles for better and comfort

Flywheel sits in enclosed water tank to provide smooth, quiet, self-regulated resistanceSeries 4 performance monitor tracks workou...t intensity, stroke rate, heart rate, and moreHandcrafted rowing machine with "water flywheel" that replicates actual rowing feelStores upright; measures 83 x 22 x 21 inches (L x W x H) and weighs 108 poundsNo impact and Non-Load Bearing, perfect for users with Joint concerns read more
In the 1950s- and 1960s, more sports coaches began to use rowing machines for training and assessment of athletes' performance. One such rower developed at this time was the Harrison-Cotton machine, the brainchild of John Harrison of Leichhardt Rowing Club in Sydney and Professor Frank Cotton, produced by Ted Curtain Engineering. This was the very first piece of equipment able to measure athletic power with great accuracy, and it also imitated the actual experience of rowing more closely than any previous rowing machine.
An 'oar' is often referred to as a blade in the case of sweep oar rowing and as a scull in the case of sculling. A sculling oar is shorter and has a smaller blade area than the equivalent sweep oar. The combined blade area of a pair of sculls is however greater than that of a single sweep oar, so the oarsman when sculling is working against more water than when rowing sweep-oared. He is able to do this because the body action in sculling is more anatomically efficient (due to the symmetry).
Modern rowing as a competitive sport can be traced to the early 10th century when races were held between professional watermen on the River Thames in London, United Kingdom. Often prizes were offered by the London Guilds and Livery Companies. Amateur competition began towards the end of the 18th century with the arrival of "boat clubs" at the British public schools of Eton College, Shrewsbury School, and Westminster School. Similarly, clubs were formed at the University of Oxford, with a race held between Brasenose College and Jesus College in 1815. At the University of Cambridge the first recorded races were in 1827. Public rowing clubs were beginning at the same time; in England Leander Club was founded in 1818, in Germany Der Hamburger und Germania Ruder Club was founded in 1836 and in the United States Narragansett Boat Club was founded in 1838 and Detroit Boat Club was founded in 1839. In 1843, the first American college rowing club was formed at Yale University.
The rowing machine itself is unlike any other on the market with its patented water filled flywheel. It is hard to exactly copy the action of a scull on the water, but the mechanics of the flywheel spinning in water comes in a close second on dry land. The fact that the water is 800 times denser than air means that there is no need for any extra resistance or dampening that you will find in normal air rowers. The faster you pull, the more resistance is generated giving it infinite variability. However, if you want to be able to practice rowing with a faster stroke, you will have to reduce the amount of water in the tank unlike an air rower where you just have to adjust the baffle.
The coxswain (or simply the cox) is the member who sits in the boat facing the bow, steers the boat, and coordinates the power and rhythm of the rowers - by communicating to the crew through a device called a cox box and speakers. They usually sit in the stern of the boat, except in bowloaders where the coxswain lies in the bow. Bowloader are usually seen as the coxed four and coxed pair type of boat.
×