The tank of the WaterRower Oxbridge Rower is made from polycarbonate, one of the strongest plastics available. It is virtually indestructible. The tank is sealed and can be filled with municipal water via a small opening closed by a stopper. This water typically contains enough chlorine to remain clear for some time. After exposure to light, the chlorine will degrade; the chlorine tablets should be added periodically.
Assembly was challenging. One of the rails could not be attached because the embedded screw in the cross-beam was too crooked to fit into the hole on the rail. I had to place a nut on it to protect the screws and tap until it was true enough cap nut to be attached. The foot board is slightly wider than the top board. I will sand this to match when I reapply the finish. This will need to be done because the wood has a dry, ashy appearance. The wood is beautiful and mostly uniform. This rowing machine is a nice product, but the build quality of the unit I received was disappointing. I felt lucky that the gashes in the carton did not damage the product as the packaging was optimistic. The leading competitor I use at the gym seems to provide slightly more resistance. It is beautiful and useful, but with room for improvement.

One downside of the Waterrower for me are the footrests. Whilst they are perfectly adequate if you want to row in shoes, rowing barefoot, which is something I like to do, is impossible. The plastic is completely square at the bottom and has sharp edges that cut into your heels. I also found that my shoes get caught when trying to put them in and out of the holders, which is a bit irritating.
Most races that are held in the spring and summer feature side by side racing, or sprint racing, sometimes called a regatta; all the boats start at the same time from a stationary position and the winner is the boat that crosses the finish line first. The number of boats in a race typically varies between two (which is sometimes referred to as a dual race) to eight, but any number of boats can start together if the course is wide enough.
Although some rowing machines are made of space-age, super-sweat-resistant metals, you still want to wipe off the equipment after a sweaty workout.  These machines are usually constructed with a lot of various materials and salty sweat can be very corrosive.  Keeping your rowing machine clean can go a long way toward extending its life, and its appearance.
The Challenge AR has the capability to allow the rower to control and adjust the resistance from “Feather light” to “Olympic sprint” delivering a silky smooth resistance to the user’s effort and instantaneous response to input with no “flat sport”.  With water resistance being the most accurate manner in which to simulate actual outdoor rowing, the Challenge AR provides a smooth and consistent sensation throughout the range of motion of the exercise experience.  
Comparing the rowing machine to the stationary bike, the rowing machine is superior in terms of calories burned. Yet, it’s important to note that the stationary bike is also easy on the joints and only includes the lower body. So, if you have any upper body problems then the stationary bike will be a much better choice. In 30 minutes of cycling 12-13 miles per hour, an 125lb individual will burn around 225-250 calories.
When a product is listed as Pre-Order, such product is not yet in stock but is available for advanced purchase on our site, prior to the manufacturer's public release date. Pre-Order items are shipped once in stock and the public release date arrives. You will be notified of a product's updated status by email. The expected shipment time is listed on the Product Detail page.

Originally made from wood, shells are now almost always made from a composite material (usually a double skin of carbon-fibre reinforced plastic with a sandwich of honeycomb material) for strength and weight advantages. FISA rules specify minimum weights for each class of boat so that no individual team will gain a great advantage from the use of expensive materials or technology.


The A1 S4 Driftwood by WaterRower delivers a total body workout, caters to fitness goals and exercise requirements. This rower is ...crafted out of fine-quality driftwood with an aluminum monorail. It is perfect for home or gym use and has a maximum user weight capacity of 375 pounds. The A1 S4 Driftwoood boasts features such as the WaterRower patented WaterFlywheel that gives life-like water rowing experience, a unique self-regulating resistance with infinite variable which suits any user, contoured seat with wheels that glide along the rail and comfortable rowing handles. It also comes with an S4 monitor that shows time per 2 or 500 kilometers, calories burned per hour, distance covered and total time of workouts. Maintenance of this rower is minimal. Simply add a purification tablet every 3-6 months. Tablets come with the package. When not in use, store the A1 S4 Driftwood vertically against a wall or in a closet. Buy your very own high-quality WaterRower Rowing Machine from Dazadi and get free shipping with every purchase. *WATER ROWER FOR HOME AND GYM USE - Crafted out of high-quality driftwood with aluminum monorail with no impact and non-load bearing, making it perfect for users with joint problems. Targets 84% of all major muscle areas like the arms, legs, back, shoulders, chest, core, etc. Water rower dimensions: 83 L x 22.5 W x 22.5 H Inches / Weight: 110 Pounds*LIFE-LIKE WATER ROWING EXPERIENCE - Features patented WaterFlywheel, unique self-regulating resistance, ergonomic seat and handles. Suits any user without need for adjustments. Maximum user weight: 375 Pounds. *TRACK YOUR PROGRESS - Water Rower comes with an intelligent S4 monitor that shows time per 2 or 500 kilometers, watts, calories burned per hour, distance, and the total time of workouts.*LOW MAINTENANCE AND SPACE EFFICIENT - This water rowing machine does not require lubrication or maintenance. User simply needs to add a purification tablet in the water every 3-6 months (tablets come with the package). When not in use, tip vertically against a wall or store in closet conveniently. read more
When a product is listed as Pre-Order, such product is not yet in stock but is available for advanced purchase on our site, prior to the manufacturer's public release date. Pre-Order items are shipped once in stock and the public release date arrives. You will be notified of a product's updated status by email. The expected shipment time is listed on the Product Detail page.
The WaterRower Classic Rower is hand crafted in solid American Black Walnut. Like all woods, Black Walnut may vary in color from a rich brown to purple-black. Each machine has been hand finished with three coats of Danish Oil giving a deep luster an warmth to the wood. The wood has been chosen due to its marvelous engineering properties, primary amongst these is its ability to absorb sound and vibration enhancing the WaterRower's quietness and smoothness of use. Black Walnut, like all woods used in WaterRower construction, is a premium hardwood with incredible longevity and dimensional stability. For reasons of ecology, all our woods are harvested from replenishable forests.
On theme with C2’s interchangeability, models D or E are essentially the same machine. When we talk about one we’re talking about both. The Concept 2 E is just 8 pounds heavier but is made out of stronger stuff all around — what’s plastic on the model D is aluminium on the model E, and what’s aluminum on the model D is welded steel on the model E. The only noticeable variations are seat height and display position.
Rifles Delivery Confirmation-Adult Signature Required. Customer must provide a physical address for delivery of this item. Cannot ship to a PO Box or APO/FPO addresses. Black powder rifles are not shipped to customers in IL, MI, NJ, NY and Washington, DC because of restrictions. This item will be removed from your order if your shipping address is to a restricted location.

The next time this happens try being more aggressive in leaning into the wave, but more importantly, you get your down-hill oar out of the water early. You can push the up-hill oar into the water to stablize the boat and prevent rolling too far in that direction. The water will be pulling your boat and oar tip in opposite directions here, so you won’t get trapped like you did before with the down-hill oar.


If you are anything like me, you read the negative reviews to see what some of the complaints could potentially be...I have found none that match with my machine or experience so far. The boxes it came in were a little bunged-up but everything on the inside was perfect. Only took about 15-20 minutes to build (first time building a row machine) and another 5-10 to fill with water. We used it for a little while before we added the danish oil.

Products listed as Out of Stock are currently not in stock at the store(s) being viewed. Note that in some instances, very limited inventory may be available in stores, but because of small quantities we are unable to reflect the availability online. Please remember to check back – if or when inventory is replenished and available, this will be reflected online.
The first international women's races were the 1954 European Rowing Championships.[54] The introduction of women's rowing at the 1976 Summer Olympics in Montreal increased the growth of women's rowing because it created the incentive for national rowing federations to support women's events. Rowing at the 2012 Summer Olympics in London included six events for women compared with eight for men.[55] In the US, rowing is an NCAA sport for women but not for men;[56] though it is one of the country's oldest collegiate sports, the difference is in large part due to the requirements of Title IX.
Rowing is unusual in the demands it places on competitors. The standard world championship race distance of 2,000 metres is long enough to have a large endurance element, but short enough (typically 5.5 to 7.5 minutes) to feel like a sprint. This means that rowers have some of the highest power outputs of athletes in any sport.[35] At the same time the motion involved in the sport compresses the rowers' lungs, limiting the amount of oxygen available to them. This requires rowers to tailor their breathing to the stroke, typically inhaling and exhaling twice per stroke, unlike most other sports such as cycling where competitors can breathe freely.
Waterrower dimensions: 83'' x 22'' x 21'' / weight: 108 lbs (at minimum water level)built for light commercial use and practically... maintenance free, rowing machine targets all major muscle groups (84% of total muscle mass) w/ excellent adjustable resistance levelsmade w/ kiln dried harwood; danish oil and urethane finish for better wood performance/strength and cozy feel to your gymboasts a patented water flywheel that mimics the natural dynamics of rowing yet suitable for users w/ joint concerns (chlorine tablet is available free of charge)enjoy 1 year manufacturer's warranty (upgradeable to 3-year parts while 5-year frame is free of charge w/ registration)comes w/ the s4 performance monitor for quickstart of functions and displays intensity, kcalories per hour, strokerate, heartrate, and more!Storage dimensions: 21'' x 22'' x 83'' (easily store it on end)entry height is at 12'' (at 20'' w/ optional hi-rise adaptor)noise/intrusion levels: soothing and relaxing/minimal read more

In the 1950s- and 1960s, more sports coaches began to use rowing machines for training and assessment of athletes' performance. One such rower developed at this time was the Harrison-Cotton machine, the brainchild of John Harrison of Leichhardt Rowing Club in Sydney and Professor Frank Cotton, produced by Ted Curtain Engineering. This was the very first piece of equipment able to measure athletic power with great accuracy, and it also imitated the actual experience of rowing more closely than any previous rowing machine.


Our Wooden Rowing Machines are Made in the USA using hardwood from only replenishable sources. We strive to manufacture rowing machines that are of a stylish design and built to last, while maintaining our commitment to eco-friendliness. Our Rowing Machines are functional fitness furniture, designed not to be hidden away like other unsightly gym equipment, but to look at home in your living room. Storing in an upright position no wider than a dining room chair, our rowing machines can be easily laid out for a quick indoor rowing exercise session. 
Ever since the earliest recorded references to rowing, the sporting element has been present. An Egyptian funerary inscription of 1430 BC records that the warrior Amenhotep (Amenophis) II was also renowned for his feats of oarsmanship. In the Aeneid, Virgil mentions rowing forming part of the funeral games arranged by Aeneas in honour of his father.[10] In the 13th century, Venetian festivals called regata included boat races among others.[11]
The model E’s seat stands 6 inches higher. And while the model D’s monitor rests on an adjustable arm, the E’s sits on unbending metal. These few technical differences do nothing to impact ride feel. We recommend the $200-cheaper model D as the best buy, but the Concept 2 E will appeal to anyone who values a higher seat and more solid construction.
The rowing machine itself is unlike any other on the market with its patented water filled flywheel. It is hard to exactly copy the action of a scull on the water, but the mechanics of the flywheel spinning in water comes in a close second on dry land. The fact that the water is 800 times denser than air means that there is no need for any extra resistance or dampening that you will find in normal air rowers. The faster you pull, the more resistance is generated giving it infinite variability. However, if you want to be able to practice rowing with a faster stroke, you will have to reduce the amount of water in the tank unlike an air rower where you just have to adjust the baffle.
×