There is some minor maintenance. Because it's made out of wood, which can expand and contract, the bolts need tightening every few months or so. It's easy and takes only a couple of minutes. That, and putting in a fresh water purification tablet every six to twelve months, are about it for regular maintenance. The only problem I've had with the rower (the reason for 4 stars instead of 5) was a squeak that developed after about 6 weeks. It took me some time to determine the source of the squeak, which was a metal bracket connecting the footrest board to the horizontal boards above the drum. I had to partially disassemble the top section and tighten four bolts, but that fixed the problem and it's been quiet ever since.
The Verified Sustainable Hardwoods used for the WaterRower are sourced from the Appalachian Mountain region of the eastern United States, where planting rates exceed harvest rates by an average multiple of 2.29. The Appalachian Hardwood Timber resource includes more than 65.4 million acres in the eastern United States and provides the world with a bounty of the finest hardwood species.

Performance is meaningless if you can’t or don’t want to use the equipment, and that’s why the Wave Water rower was built for comfort and convenience. With a wide, molded seat to accommodate users of all sizes and a padded, textured rowing handle, you can build your strength and endurance in ease. When setting up the rower, the leveling endcaps with a dial ensure stability. After your workout, storing your Wave Water rower is easy – just fold the frame and roll the rower into a closet or corner.
A bumps race is a multi-day race beginning with crews lined up along the river at set intervals. They start simultaneously and all pursue the boat ahead while avoiding being bumped by a boat from behind. If a crew overtakes or makes physical contact with the crew ahead, a bump is awarded. As a result, damage to boats and equipment is common during bumps racing. To avoid damage the cox of the crew being bumped may concede the bump before contact is actually made. The next day, the bumping crew will start ahead of any crews that have been bumped. The positions at the end of the last race are used to set the positions on the first day of the races the next year. Oxford and Cambridge Universities hold bumps races for their respective colleges twice a year, and there are also Town Bumps races in both cities, open to non-university crews. Oxford's races are organised by City of Oxford Rowing Club[41] and Cambridge's are organised by the Cambridgeshire Rowing Association.
The Challenge AR has the capability to allow the rower to control and adjust the resistance from “Feather light” to “Olympic sprint” delivering a silky smooth resistance to the user’s effort and instantaneous response to input with no “flat sport”.  With water resistance being the most accurate manner in which to simulate actual outdoor rowing, the Challenge AR provides a smooth and consistent sensation throughout the range of motion of the exercise experience.  
John Duke, creator of the WaterRower, was inspired to try his hand at invention while working at a subsidiary for U.S. Steel. He wanted to make an indoor machine that felt as much like real rowing as possible, with a focus on aesthetics. It took him two years to get the design right, moving past failed ideas such as a flipper in the tank instead of a clutch. What began as a series of doodles at his desk turned into a sculptural piece of exercise equipment that upends expectations in two ways: by bringing water indoors, and by looking elegant and artful when stored.

The horizontal movement of the water when a wave passes is approximately equal to the up and down movement of the water. If you are on flat water and are parallel to waves made by a passing boat, your boat will move side-to-side as much as up-and–down as the wave passes under you. The side-to-side movement actually creates most of the difficulty in balancing the boat in such a situation. However, under typical conditions in the bay there can be such varied wave action that you can’t easily distinguish horizontal and vertical motion.
You are eligible for a full refund if no ShippingPass-eligible orders have been placed. You cannot receive a refund if you have placed a ShippingPass-eligible order. In this case, the Customer Care team will remove your account from auto-renewal to ensure you are not charged for an additional year and you can continue to use the subscription until the end of your subscription term.
Rowing is one of the few non-weight bearing sports that exercises all the major muscle groups, including quads, biceps, triceps, lats, glutes and abdominal muscles. The sport also improves cardiovascular endurance and muscular strength. High-performance rowers tend to be tall and muscular: although extra weight does increase the drag on the boat, the larger athletes' increased power tends to be more significant. The increased power is achieved through increased length of leverage on the oar through longer limbs of the athlete. In multi-person boats (2,4, or 8), the lightest person typically rows in the bow seat at the front of the boat.
1.) I keep reading about cracks and leaks that develop in the water tank. WaterRower even offers a tank repair kit for this very issue. It seems to me that this is a design flaw that they refuse to address, instead offering a fix for when it eventually occurs. Have you seen these tanks to eventually leak? I’m surprised they haven’t tried a one-piece tank.
Ergometer rowing machines (colloquially ergs or ergo) simulate the rowing action and provide a means of training on land when waterborne training is restricted, and of measuring rowing fitness. Ergometers do not simulate the lateral balance challenges, the exact resistance of water, or the exact motions of true rowing including the sweep of the oar handles. For that reason ergometer scores are generally not used as the sole selection criterion for crews (colloquially "ergs don't float"), and technique training is limited to the basic body position and movements. However, this action can still allow a comparable workout to those experienced on the water.

Ergometer rowing machines (colloquially ergs or ergo) simulate the rowing action and provide a means of training on land when waterborne training is restricted, and of measuring rowing fitness. Ergometers do not simulate the lateral balance challenges, the exact resistance of water, or the exact motions of true rowing including the sweep of the oar handles. For that reason ergometer scores are generally not used as the sole selection criterion for crews (colloquially "ergs don't float"), and technique training is limited to the basic body position and movements. However, this action can still allow a comparable workout to those experienced on the water.
The fluid movement and sound of the WaterRower's dynamic WaterFlyWheel have been praised for lulling babies to sleep. The smooth, quiet, and unintrusive nature of our rowing machine allows for a workout not limited by time of day or proximity to others. Enjoy an indoor rowing exercise while watching television, or while another reads in the same room!
In sweep or sweep-oar rowing, each rower has one oar, held with both hands. This is generally done in pairs, fours, and eights. In some regions of the world, each rower in a sweep boat is referred to either as port or starboard, depending on which side of the boat the rower's oar extends to. In other regions, the port side is referred to as stroke side, and the starboard side as bow side; this applies even if the stroke oarsman is rowing on bow side and/or the bow oarsman on stroke side.
 The amount of water in the tank simulates the weight of the boat and crew, the more water in the tank the heavier the boat and crew. The standard Calibration Level is Level 17. If the user is lighter in weight, Level 15-16 can be used. If the user is heavier in weight, level 18-19 can be used. The maximum level to fill the tank is Level 19. DO NOT fill above the maximum level – this could void the warranty.
Amateur competition in England began towards the end of the 18th century. Documentary evidence from this period is sparse, but it is known that the Monarch Boat Club of Eton College and the Isis Club of Westminster School were both in existence in the 1790s. The Star Club and Arrow Club in London for gentlemen amateurs were also in existence before 1800. At the University of Oxford bumping races were first organised in 1815 when Brasenose College and Jesus College boat clubs had the first annual race[14] while at Cambridge the first recorded races were in 1827.[15] Brasenose beat Jesus to win Oxford University's first Head of the River; the two clubs claim to be the oldest established boat clubs in the world. The Boat Race between Oxford University and Cambridge University first took place in 1829, and was the second intercollegiate sporting event (following the first Varsity Cricket Match by 2 years). The interest in the first Boat Race and subsequent matches led the town of Henley-on-Thames to begin hosting an annual regatta in 1839.[16]

In addition to this, certain crew members have other titles and roles. In an 8+ the stern pair are responsible for setting the stroke rate and rhythm for the rest of the boat to follow. The middle four (sometimes called the "engine room" or "power house") are usually the less technical, but more powerful rowers in the crew, whilst the bow pair are the more technical and generally regarded as the pair to set up the balance of the boat. They also have most influence on the line the boat steers.


Racing boats are stored in boat houses. These are specially designed storage areas which usually consist of a long two-story building with a large door at one end which leads out to a pontoon or slipway on the river or lakeside. The boats are stored on racks (horizontal bars, usually metal) on the ground floor. Oars, riggers, and other equipment is stored around the boats. Boat houses are typically associated with rowing clubs and include some social facilities on the upper floor: a cafe, bar, or gym.
I am happy with this rowing machine..it is quiet and offers good resistence without puttong too much stress on my joints...HOWEVER...the electronic counter has NOT worked from day one!!!..pulling the handle does NOT activate the meter at all!...I hve pluged in the wires and repeated that process SEVERAL times..BUT...nothing!!...I can activate the meter manually...BUT...it is USELESS for registering any rowing activity!!..As I said...good rower....USELESS Eleconic meter!!!

If the machine is to be housed on a wooden floor you will need a mat beneath to reduce vibration and also noise. If space is tight, the hydraulic options are usually the smallest. It's also worth checking your floor can take the weight if you're going for one of the bigger, heavier models. For most, this shouldn't be a problem, if you have any doubts get a surveyor to check as it could be a very expensive mistake!
Outside of resistance type, we found the number-one arbiter of ride feel to be cord quality. Water ergometers tend to employ nylon cords, while air ergometers feature metal chains — a durability factor we anticipated would result in our favoring air. But while all three water rowers aced our expectation of smooth, high-tension strokes, perfecting the chain seems to be more difficult: Some tug with just a slight rumble, others feature bouncy, grinding chains that are incredibly loud, something akin to angry snoring. As for nylon, the best wind and unwind like elastic silk — no slack, no sound, no catching, just perfectly even tension throughout the stroke.

This popular rowing machine utilizes magnetic resistance for a quiet, and very smooth workout. The Velocity Exercise CHR-2001 also features a programmable computer with 12 programs that will keep your exercising varied and challenging for years. The computer also provides data on distance, time, calories burned, pulse rate, strokes per minute, and stroke count. Additionally, the tension resistance is electronically controlled via the computer.  This electronic resistance control feature puts the CHR-2001 ahead of other magnetic rowers that tend to use knobs.
If you are anything like me, you read the negative reviews to see what some of the complaints could potentially be...I have found none that match with my machine or experience so far. The boxes it came in were a little bunged-up but everything on the inside was perfect. Only took about 15-20 minutes to build (first time building a row machine) and another 5-10 to fill with water. We used it for a little while before we added the danish oil.
×