Most races that are held in the spring and summer feature side by side racing, or sprint racing, sometimes called a regatta; all the boats start at the same time from a stationary position and the winner is the boat that crosses the finish line first. The number of boats in a race typically varies between two (which is sometimes referred to as a dual race) to eight, but any number of boats can start together if the course is wide enough.


The rowing machine itself is unlike any other on the market with its patented water filled flywheel. It is hard to exactly copy the action of a scull on the water, but the mechanics of the flywheel spinning in water comes in a close second on dry land. The fact that the water is 800 times denser than air means that there is no need for any extra resistance or dampening that you will find in normal air rowers. The faster you pull, the more resistance is generated giving it infinite variability. However, if you want to be able to practice rowing with a faster stroke, you will have to reduce the amount of water in the tank unlike an air rower where you just have to adjust the baffle.
Tank: The tank of the WaterRower M1 LoRise is made from polycarbonate, one of the strongest plastics available. It is virtually indestructible. The tank is sealed and can be filled with municipal water via a small opening closed by a stopper. This water typically contains enough chlorine to remain clear for some time. After exposure to light, the chlorine will degrade and the chlorine tablets included free with the WaterRower M1 LoRise should be added periodically.

The WaterRower Classic is handcrafted from solid American Black Walnut wood, finished with danish oil. The WaterRower's patented WaterFlywheel has been specifically designed to emulate the dynamics of a boat moving though water and is unsurpassed in its simulation of the physical and physiological benefits of rowing. WaterRower will not provide support or documentation for any product transported outside of the original country of purchase

Sometimes, slides are placed underneath the erg to try to simulate the movement of being on the water. It allows the machine to move back and forth smoothly as if there is water beneath you. The slides can be connected in rows or columns so that rowers are forced to move together on the ergometer, similar to how they would match up their rhythm in a boat.
The meter didn't work properly. It wasn't keeping the distance - we would row for 30 mins and wouldn't even be at 1km!!! And the strokes per minute was reading double strokes (which the company said was normal - huh?). Their customer service team was good and tried to make it work but we ended up returning it and spent the extra money to get a WaterRower and it is amazing!!!
Being able to easily store your rower is a huge plus. Make sure you investigate how well the machine stores, if it folds up or comes apart easily to be able to put it in your closet, or in other storage areas. As an example, the Concept2 Model D rowing machine folds up nicely by a simple pull pin located in the middle of the rower. Wheels on the bottom allow for easy moving.
The Verified Sustainable Hardwoods used for the WaterRower are sourced from the Appalachian Mountain region of the eastern United States, where planting rates exceed harvest rates by an average multiple of 2.29. The Appalachian Hardwood Timber resource includes more than 65.4 million acres in the eastern United States and provides the world with a bounty of the finest hardwood species.

The dense resistance of water creates substantial drag, but on the WaterRower models, this is perfectly tempered by a whippy cord. It coils and recoils with such steady speed that one tester noted how the Classic “eats the rope back up on recovery.” This smooth agility helps balance out the impact of encountering slow water at the start of every stroke.


The WaterRower Natural Rowing Machine with S4 Monitor is hand crafted in solid Ash and stained Honey Oak for consistency of color.... Each rowing machine has been hand finished with Danish Oil giving a deep luster and warmth to the wood. Wood has been chosen due to its marvelous engineering properties, primary amongst these is its ability to absorb sound and vibration enhancing the WaterRower's smooth and quiet performance.;Flywheel sits in enclosed water tank to provide smooth, quiet, self-regulated resistanceSeries 4 performance monitor tracks workout intensity, stroke rate, heart rate, and moreHandcrafted rowing machine with inchwater flywheel inch that replicates actual rowing feelStores upright; measures 84 x 21 x 22 inches (W x H x D) and weighs 117 poundsStores upright; measures 84 x 21 x 22 inches (W x H x D) and weighs 117 pounds read more
The WaterRower Classic is hand crafted in solid American Black Walnut. Like all woods, Black Walnut may vary in color from a rich brown to purple-black. Each machine has been hand finished with three coats of Danish Oil giving a deep lustre an warmth to the wood. Wood has been chosen due to its marvellous engineering properties, primary amongst these is its ability to absorb sound and vibration enhancing the WaterRower's quietness and smoothness of use. Black Walnut, like all woods used in WaterRower construction, is a premium hardwood with incredible longevity and dimensional stability. For reasons of ecology, all our woods are harvested from replenishable forests.

After reading so many fantastic reviews I purchased the Classic model. Before I write what I think are the negative aspects I'll say that it gives a great workout! That is pretty obvious and I don't think that part is arguable. The disappointment began while unpacking. The wood parts were wrapped fairly well and did not have damage but there were several scratches that I had to sand out and re-oil. It appears that they were there before shipping. Putting it together would have been fast and easy- except 2 of the bolts were bent at about 15 degrees and would not fit. I had to wrap with tape and bend with vice grips. After getting it all together the rower worked well for about a week. I started to notice an annoying kind of popping sound from the left rail as the wheels rolled over on each stroke and recovery. It seems the plastic that the wheels ride on is not flat or adhered well to the rail. It isn't very loud but I can hear it well and it gets my attention, spoiling the nice sound of the water. Really disturbing. Support at WaterRower would like a video of the issue. Seems like an obvious issue and could swap out with a rail that is good instead of me trying to make a video of this small sound while moving the seat back and forth. For a $1500 machine the quality control- or lack of it is disturbing. Having to jump through a bunch of hoops because they are too cheap to just send a part is even more so. Perhaps I am being difficult but it is upsetting to have something touted as so great but put together like a $200 piece of junk. Another complaint would be the lack of any back lighting on the monitor. Really cannot see it if the lights are low. Being able to remove the monitor to attach to a PC wouldn't hurt either. While it gives a good workout the rower really suffers from poor manufacturing.
Another negative point for me is the angle of the seat. Unlike the Concept2, it has a slight backward angle, which makes it easier to maintain good form at the end of the stroke. Given that the Waterrower has greater resistance at the catch, it puts more pressure on the lower back at this point making it uncomfortable for people like myself with lumbar spine problems.
The machine was easy to put together and worked well mechanically. The problem is the electronic monitor. The strokes/min registered as double the actual pace, and the distance registered as 1/10th the actual distance. I contacted customer support via email and their response was slow and inadequate. I am returning the machine and plan to buy a WaterRower.
Each machine has been hand finished with Danish Oil and Urethane for protection. Wood has been chosen due to its marvelous engineering properties, primary amongst these is its ability to absorb sound and vibration enhancing the WaterRower's quietness and smoothness of use. Ash, like all woods used in WaterRower construction, is a premium hardwood with incredible longevity and dimensional stability. For reasons of ecology, all our woods are harvested from replenishable forests. 

WaterRower is made in the USA using hardwood from only replenishable sources. WaterRower strives to manufacture rowing machines that are of a stylish design and built to last, while maintaining our commitment to eco-friendliness. Our WaterRower Rowing Machines are functional fitness furniture, designed not to be hidden away like other unsightly gym equipment, but to look at home in your living room. Storing the waterrower in an upright position no wider than a dining room chair, our rowing machines can be easily laid out for a quick indoor rowing exercise session. Order your WaterRower from FitnessZone.com!
We're Marta and Brock, happily married new parents, and bring you a fun and simple approach to fitness, weight-loss, and nutrition through our knowledge, experiences and continued journey. Tune in for creative home and outdoor workouts, health and exercise tips, interviews, and organic gluten-free plant-based recipes (raw and/or cooked) for health and fitness newbies and enthusiasts! Occasionally you can win some cool stuff too :)
The Concept2 Model D Indoor Rowing Machine includes the excellent PM5 monitor that provides all vital data. It can display your workout performance in two ways. You can choose to see your workout in total distance and time, or as “splits”. Splits is a way of seeing how your pace is varying along two set points. Either way is useful, but splits give you more of a “real-time”, in the moment calculation of how you are doing.
Wood is used for its unique visual appeal, but also for its ability to absorb sound vibration for smooth, quiet operation, as well as it's stable longevity. The Club edition rowing machine is handcrafted in solid ash wood and stained for color. It has been designed for high traffic or commercial areas, and its black rails have been styled to prevent scuffing. The other wooden components are finished in an attractive rosewood which is more resistant to soiling than the Natural model. Each machine has also been hand finished with Danish Oil and Urethane for protection.
Waterrower dimensions: 83'' x 22'' x 21'' / weight: 108 lbs (at minimum water level)built for home use and practically maintenance... free, rowing machine targets all major muscle groups (84% of total muscle mass) w/ excellent adjustable resistance levelsmade of kiln dried harwood for better wood strength and performance; has honey oak finish that goes well w/ other home furnitureboasts a patented water flywheel that mimics the natural dynamics of rowing yet suitable for users w/ joint concerns (chlorine tablet is available free of charge)enjoy 1 year manufacturer's warranty (upgradeable to 3-year parts while 5-year frame is free of charge w/ registration)comes w/ the s4 performance monitor for quickstart of functions and displays intensity, kcalories per hour, strokerate, heartrate, and more!Storage dimensions: 21'' x 22'' x 83'' (easily store it on end)entry height is at 12'' (at 20'' w/ optional hi-rise adaptor)noise/intrusion levels: soothing and relaxing/minimal read more
Waterrower dimensions: 83'' x 22'' x 21'' / weight: 108 lbs (at minimum water level)built for home use and practically maintenance... free, rowing machine targets all major muscle groups (84% of total muscle mass) w/ excellent adjustable resistance levelsmade of kiln dried harwood for better wood strength and performance; has honey oak finish that goes well w/ other home furnitureboasts a patented water flywheel that mimics the natural dynamics of rowing yet suitable for users w/ joint concerns (chlorine tablet is available free of charge)enjoy 1 year manufacturer's warranty (upgradeable to 3-year parts while 5-year frame is free of charge w/ registration)comes w/ the s4 performance monitor for quickstart of functions and displays intensity, kcalories per hour, strokerate, heartrate, and more!Storage dimensions: 21'' x 22'' x 83'' (easily store it on end)entry height is at 12'' (at 20'' w/ optional hi-rise adaptor)noise/intrusion levels: soothing and relaxing/minimal read more

The rowing machine itself is unlike any other on the market with its patented water filled flywheel. It is hard to exactly copy the action of a scull on the water, but the mechanics of the flywheel spinning in water comes in a close second on dry land. The fact that the water is 800 times denser than air means that there is no need for any extra resistance or dampening that you will find in normal air rowers. The faster you pull, the more resistance is generated giving it infinite variability. However, if you want to be able to practice rowing with a faster stroke, you will have to reduce the amount of water in the tank unlike an air rower where you just have to adjust the baffle.

×