The horizontal movement of the water when a wave passes is approximately equal to the up and down movement of the water. If you are on flat water and are parallel to waves made by a passing boat, your boat will move side-to-side as much as up-and–down as the wave passes under you. The side-to-side movement actually creates most of the difficulty in balancing the boat in such a situation. However, under typical conditions in the bay there can be such varied wave action that you can’t easily distinguish horizontal and vertical motion.
I have also received negative feedback about the resistance. After 15 minutes at the maximum level, you will feel that you are hardly putting an effort to row. However, this won’t be an issue if your weight is less. This could indicate an issue with the oil or gasoline mixture in the piston. Also, issues were mentioned by other customers with the footrests. They’d problem strapping their feet. It is a bigger issue as it becomes difficult for people who have small feet as the feet keeps on slipping. The footrest grip is not tight. This is affecting particularly when you would like to experience a workout without any interruption; when you actually want to go with the flow of workout. Fast rowing also becomes difficult with this type of problem as you have to stop and strap the feet back. However, the problem could be solved by using a wide and thick Velcro straps. Use your creativity and be resourceful while coming up with the ideas to solve the problem of slipping feet.
Originally made from wood, shells are now almost always made from a composite material (usually a double skin of carbon-fibre reinforced plastic with a sandwich of honeycomb material) for strength and weight advantages. FISA rules specify minimum weights for each class of boat so that no individual team will gain a great advantage from the use of expensive materials or technology.
After reading so many fantastic reviews I purchased the Classic model. Before I write what I think are the negative aspects I'll say that it gives a great workout! That is pretty obvious and I don't think that part is arguable. The disappointment began while unpacking. The wood parts were wrapped fairly well and did not have damage but there were several scratches that I had to sand out and re-oil. It appears that they were there before shipping. Putting it together would have been fast and easy- except 2 of the bolts were bent at about 15 degrees and would not fit. I had to wrap with tape and bend with vice grips. After getting it all together the rower worked well for about a week. I started to notice an annoying kind of popping sound from the left rail as the wheels rolled over on each stroke and recovery. It seems the plastic that the wheels ride on is not flat or adhered well to the rail. It isn't very loud but I can hear it well and it gets my attention, spoiling the nice sound of the water. Really disturbing. Support at WaterRower would like a video of the issue. Seems like an obvious issue and could swap out with a rail that is good instead of me trying to make a video of this small sound while moving the seat back and forth. For a $1500 machine the quality control- or lack of it is disturbing. Having to jump through a bunch of hoops because they are too cheap to just send a part is even more so. Perhaps I am being difficult but it is upsetting to have something touted as so great but put together like a $200 piece of junk. Another complaint would be the lack of any back lighting on the monitor. Really cannot see it if the lights are low. Being able to remove the monitor to attach to a PC wouldn't hurt either. While it gives a good workout the rower really suffers from poor manufacturing.
Water rowers are just a recent invention followed by the air rower, which utilizes paddles and water in order to create the resistance. While there are a lot of people who prefer the air rower compared to this one, there are also people who prefer the water rower because it has a smoother, quieter feel of the action, especially when emulating the movement of water rowing. Like the air rower, this machine is able to burn calories and work up your muscles through offering resistance to your movement while sitting on the sliding seat. The more resistance there is, the more it makes it harder to work on the machine and your workout becomes more challenging.
Get the WaterRower S1 Indoor Rowing Machine w/ S4 Monitor for your home gym! This exercise equipment targets compound muscles such... as arms, legs, back, and glutes. It's the perfect workout as if you're actually driving a boat with oars. Its construction features a stainless steel makeup with brushed finish--giving it high durability. Moreover, it boasts a patented water flywheel responsible for its natural rowing dynamic. Enjoy self-regulating resistance levels--making it suitable for individuals with joint concerns, along with little maintenance required by replacing the chlorine tablet every 2-6 months. Other specifications include maximum user weight and height of 1000 pounds and 38-inch inseam. What's more, it comes with the S4 performance monitor that displays intensity, Kcalories per hour, Strokerate, Heartrate, and more! So avail a WaterRower S1 Indoor Rowing Machine w/ S4 Monitor today! read more
The WaterRower Club Rower has been designed for high traffic areas such as commercial gyms, studios, rehabilitation clinics, etc. Its black rails have been styled to prevent scuffing; other wooden components are finished in an attractive rosewood which are more resistant to soiling than the natural model. Each machine has been hand finished with Danish oil and urethane for protection. Wood has been chosen due to its marvelous engineering properties, primary amongst these is its ability to absorb sound and vibration enhancing the waterrower's quietness and smoothness of use. Ash, like all woods used in WaterRower construction, is a premium hardwood with incredible longevity and dimensional stability. For reasons of ecology, all WaterRower woods are harvested from replenishable forests. WaterRower Club Rower Black Rails have been styled to prevent scuffing, other wooden components are finished in an attractive rosewood which are more resistant to soiling than the Natural model.
Water rowers feature a tank that is actually filled with water as a means for resistance. As you increase the pace of rowing, the resistance naturally increases as well. This means that you can set your own pace and resistance in a single motion. The same is true for air rowers. Air rowers use a fan or flywheel to create resistance, and you have control over the intensity of the workout due to the fact that the air resistance depends on your pace. Most water and air rowers come equipped with -- or at least have as an option -- monitors that track various functions such as distance, strokes, strokes per minute and calories burned.

The Challenge AR has the capability to allow the rower to control and adjust the resistance from “Feather light” to “Olympic sprint” delivering a silky smooth resistance to the user’s effort and instantaneous response to input with no “flat sport”.  With water resistance being the most accurate manner in which to simulate actual outdoor rowing, the Challenge AR provides a smooth and consistent sensation throughout the range of motion of the exercise experience.  
Function plays a large role in defining good design. When designers look at an object, they don't just consider its aesthetic appearance; they should also challenge it to be more versatile, to respond to the user's need, or to achieve its purpose more elegantly. Good design has the capacity to solve problems that sometimes we didn't even know we had. This is one of the ways design touches and enriches our everyday life.

Originally made from wood, shells are now almost always made from a composite material (usually a double skin of carbon-fibre reinforced plastic with a sandwich of honeycomb material) for strength and weight advantages. FISA rules specify minimum weights for each class of boat so that no individual team will gain a great advantage from the use of expensive materials or technology.
This affordable rowing machine is streamlined, simple to use, built well, has a comfy seat with a realistic rowing movement, and especially good for a newbie. Because the cost of this machine is less than $150, it is popular on the net. As it has a hydraulic rower, resistance is provided by just one piston under the main key column. Along with a comfy cushioned seat, LCD screen, this machine provides 12 hydraulic cylinder resistances.
If you are accustomed to the natural catch and feel of on-water rowing, your rowing technique will immediately appreciate the Apollo’s unrivalled emulation of a boat gliding through water. FDF’s patented twin tank design generates a smooth uniform stroke, including no lag of resistance at the catch and continued resistance all the way to the finish.
Wood is used for its unique visual appeal, but also for its ability to absorb sound vibration for smooth, quiet operation, as well as it's stable longevity. The Club edition rowing machine is handcrafted in solid ash wood and stained for color. It has been designed for high traffic or commercial areas, and its black rails have been styled to prevent scuffing. The other wooden components are finished in an attractive rosewood which is more resistant to soiling than the Natural model. Each machine has also been hand finished with Danish Oil and Urethane for protection.
For a third option, you can look to hydraulic machines, which use pistons to generate resistance. Hydraulic rowers are quiet, and they also tend to be smaller and cheaper than other kinds of rowing machines, but you won’t get the same smooth rowing feel, or the consistency of resistance, that you would get with an air or water rower. What's more, reviewer after reviewer has found them unreliable and high-maintenance.
Infinitely Variable Resistance: The benefit of a water resistance rower is that it most closely simulates a boat moving through water. When rowing the resistance is due to the effect of fluid drag acting on the boat. Go faster, resistance increases. Go slower resistance decreases. Importantly, the user chooses; regardless of age, gender, size or fitness. The WaterRower M1 LoRise's patented WaterFlywheel emulates this naturally self-paced benefit of rowing. This is a workout you can start benefitting from immediately, regardless of experience!

The rowing machine itself is unlike any other on the market with its patented water filled flywheel. It is hard to exactly copy the action of a scull on the water, but the mechanics of the flywheel spinning in water comes in a close second on dry land. The fact that the water is 800 times denser than air means that there is no need for any extra resistance or dampening that you will find in normal air rowers. The faster you pull, the more resistance is generated giving it infinite variability. However, if you want to be able to practice rowing with a faster stroke, you will have to reduce the amount of water in the tank unlike an air rower where you just have to adjust the baffle.
×