The Concept2 Model D Indoor Rowing Machine includes the excellent PM5 monitor that provides all vital data. It can display your workout performance in two ways. You can choose to see your workout in total distance and time, or as “splits”. Splits is a way of seeing how your pace is varying along two set points. Either way is useful, but splits give you more of a “real-time”, in the moment calculation of how you are doing.

The WaterRower Classic Rower is outfitted with a Series 4 performance monitor that's designed to balance technical sophistication with user-friendliness. The monitor--which includes six information and programming windows, six QuickSelection buttons, and three navigation buttons--displays your workout intensity, stroke rate, heart rate, zone bar, duration, and distance. Plus, the monitor is compatible with an optional heart rate chest strap and receiver, which helps you optimize your workout and achieve your exercise objectives.
The Challenge AR features an advanced computer monitor providing the rower with measurable performance output, an ergonomically designed seat that rides on precision bearings and rollers for absolute smoothness, an upgraded footboard with advanced heel support, and an innovative soft grip handle to eliminate stress on the hands and wrist during the comfortable, but physical workout.

Unlike most other non-combat sports, rowing has a special weight category called lightweight (Lwt for short). According to FISA, this weight category was introduced "to encourage more universality in the sport especially among nations with less statuesque people". The first lightweight events were held at the World Championships in 1974 for men and 1985 for women. Lightweight rowing was added to the Olympics in 1996.
This elegant rowing machine builds strength and stamina by closely simulating a real world rowing experience. Its patented Waterflywheel, which moves through actual water, provides a smooth stroke that exercises 84% of your muscle mass evenly and prevents injuries. When not in use, the WaterRower can be stored vertically against a wall. Made in the USA from ethically sourced walnut wood. Assembly required.
The WaterRower Club is hand crafted in solid Ash and stained for color. The WaterRower Club has been designed for High Traffic Areas such as Commercial Gyms, Studios, Rehabilitation Clinics, etc. Its Black Rails have been styled to prevent scuffing, other wooden components are finished in an attractive rosewood which are more resistant to soiling than the Natural model. Each machine has been hand finished with Danish Oil and Urethane for protection. Wood has been chosen due to its marvellous engineering properties, primary amongst these is its ability to absorb sound and vibration enhancing the WaterRower's quietness and smoothness of use. Ash, like all woods used in WaterRower construction, is a premium hardwood with incredible longevity and dimensional stability. s For reasons of ecology, all our woods are harvested from replenishable forests.
A bumps race is a multi-day race beginning with crews lined up along the river at set intervals. They start simultaneously and all pursue the boat ahead while avoiding being bumped by a boat from behind. If a crew overtakes or makes physical contact with the crew ahead, a bump is awarded. As a result, damage to boats and equipment is common during bumps racing. To avoid damage the cox of the crew being bumped may concede the bump before contact is actually made. The next day, the bumping crew will start ahead of any crews that have been bumped. The positions at the end of the last race are used to set the positions on the first day of the races the next year. Oxford and Cambridge Universities hold bumps races for their respective colleges twice a year, and there are also Town Bumps races in both cities, open to non-university crews. Oxford's races are organised by City of Oxford Rowing Club[41] and Cambridge's are organised by the Cambridgeshire Rowing Association.
The resistance of your rowing machine impacts how it moves. Select from hydraulic and magnetic rowing resistance. Hydraulic rowers are typically more compact in size, while magnetic machines make little noise as they operate. Details like easy-to-reach tension knobs or buttons allow you to increase or decrease the intensity of your resistance as you train.
Water Rower Dimensions: 88" x 22" x 28.5" / Weight: 79 Lbs (Empty Tank), 116 Lbs (With Water); Maximum User Weight And Height: 700... Lbs & 38" InseamExercise Rower Features Aluminum Makeup With Powder-Coated Aluminum Finish For High DurabilityBoasts Patented Water Flywheel Responsible For Its Natural Rowing Dynamic-Like Actually Driving A Boat With Oars! Other Features: Self-Regulating Resistance Levels-Making It Suitable For Any User, Little Maintenance Required (Tablets Available From Manufacturer Free Of Charge) And Inclusive Of S4 Performance Monitor (Displays Intensity, Kcalories/Hour, Stroke Rate, Heart Rate, And More! Enjoy 1 Year Commercial Warranty (Upgradeable To 3-Year Parts While 5-Year Frames Are Free Of Charge With Registration) read more
Wave water resistance feels and sounds like rowing on the water. Water resistance provides a dynamic rowing stroke with infinite resistance levels. Siphon included for filling and removing water from reservoir. Wide, molded seat for comfort. Ball-bearing rollers for smooth seat gliding. Multi-function monitor provides instant feedback on your workout. Padded, textured rowing handle for better grip. Pivoting footplates with adjustable strap to secure feet. Folding frame for storage. Wheels for transport. Leveling endcaps with dial to ensure stability. Nylon rowing strap. Blue water tank. Padded seat. Targeted training: Full body strength and cardio. Weight capacity: 300 lbs.. Warranty: Three years on frame and 90 days on parts. Made from steel. Black finish. Minimal assembly required. 85.35 in. L x 20.25 in. W x 33.75 in. H (71.7 lbs.). Instruction Manual. Real Water Resistance: Because the Stamina Wave Water Rowing Machine incorporates water resistance, users will truly feel as though they are out on the lake or river. Water resistance makes the rowing stroke smoother and more consistent, but most importantly, it offers infinite resistance. Just like rowing on water, faster, harder pushes increase the resistance. To further increase or decrease the resistance, you can add or remove water with the included siphon. Even more, water in the reservoir mimics the sound of moving water, which makes the indoor rowing experience more lifelike. Built to Endure While Building Endurance: The Wave Water Rowing Machine is built to last no matter how often you use it. With steel frame construction and rowing beam, the rower can withstand years of prolonged, intense use. Even more, the sturdy, pivoting footplates with straps keep you secure during your workout while the rower itself is stabilized on leveling endcaps with dials. To further motivate you, the rower also comes equipped with a multi-function monitor that tracks dis
Single, and double sculls are usually steered by the scullers pulling harder on one side or the other. In other boats, there is a rudder, controlled by the coxswain, if present, or by one of the crew. In the latter case, the rudder cable is attached to the toe of one of his shoes which can pivot about the ball of the foot, moving the cable left or right. The bowman may steer since he has the best vision when looking over his shoulder. On straighter courses, the strokesman may steer, since he can point the stern of the boat at some landmark at the start of the course. On international courses, landmarks for the steersmen, consisting of two aligned poles, may be provided.

One of the major deciding factors between water and air rowers is price. Water rowing machines are often found in higher price ranges with the lowest model going for $700 and the best models starting around $1,100. Air rowers are found in every price range starting at $300 and going as high as $1,000+. The affordability of air rowing machines makes them very popular.
Velocity Exercise puts a premium on comfort here with a polyurethane molded saddle seat, and magnetic drum resistance contributes to a row machine that is durable, won’t need much or any maintenance, and, as we mentioned does not create much noise in use. This makes it easy to row while watching TV or listening to music. It also means the other people in your home won’t be listening to you workout quite as much. Easy to assemble and store, the Velocity Exercise Magnetic Rower CHR-2001 is a good choice for a mid-priced rower.  Click here to read the full review.
In sweep or sweep-oar rowing, each rower has one oar, held with both hands. This is generally done in pairs, fours, and eights. In some regions of the world, each rower in a sweep boat is referred to either as port or starboard, depending on which side of the boat the rower's oar extends to. In other regions, the port side is referred to as stroke side, and the starboard side as bow side; this applies even if the stroke oarsman is rowing on bow side and/or the bow oarsman on stroke side.
Rowing is a cyclic (or intermittent) form of propulsion such that in the quasi-steady state the motion of the system (the system comprising the rower, the oars, and the boat), is repeated regularly. In order to maintain the steady-state propulsion of the system without either accelerating or decelerating the system, the sum of all the external forces on the system, averaged over the cycle, must be zero. Thus, the average drag (retarding) force on the system must equal the average propulsion force on the system. The drag forces consist of aerodynamic drag on the superstructure of the system (components of the boat situated above the waterline), as well as the hydrodynamic drag on the submerged portion of the system. The propulsion forces are the forward reaction of the water on the oars while in the water. Note also that the oar can be used to provide a drag force (a force acting against the forward motion) when the system is brought to rest.
After reading so many fantastic reviews I purchased the Classic model. Before I write what I think are the negative aspects I'll say that it gives a great workout! That is pretty obvious and I don't think that part is arguable. The disappointment began while unpacking. The wood parts were wrapped fairly well and did not have damage but there were several scratches that I had to sand out and re-oil. It appears that they were there before shipping. Putting it together would have been fast and easy- except 2 of the bolts were bent at about 15 degrees and would not fit. I had to wrap with tape and bend with vice grips. After getting it all together the rower worked well for about a week. I started to notice an annoying kind of popping sound from the left rail as the wheels rolled over on each stroke and recovery. It seems the plastic that the wheels ride on is not flat or adhered well to the rail. It isn't very loud but I can hear it well and it gets my attention, spoiling the nice sound of the water. Really disturbing. Support at WaterRower would like a video of the issue. Seems like an obvious issue and could swap out with a rail that is good instead of me trying to make a video of this small sound while moving the seat back and forth. For a $1500 machine the quality control- or lack of it is disturbing. Having to jump through a bunch of hoops because they are too cheap to just send a part is even more so. Perhaps I am being difficult but it is upsetting to have something touted as so great but put together like a $200 piece of junk. Another complaint would be the lack of any back lighting on the monitor. Really cannot see it if the lights are low. Being able to remove the monitor to attach to a PC wouldn't hurt either. While it gives a good workout the rower really suffers from poor manufacturing.
The WaterRower Club Rower has been designed for high traffic areas such as commercial gyms, studios, rehabilitation clinics, etc. Its black rails have been styled to prevent scuffing; other wooden components are finished in an attractive rosewood which are more resistant to soiling than the natural model. Each machine has been hand finished with Danish oil and urethane for protection. Wood has been chosen due to its marvelous engineering properties, primary amongst these is its ability to absorb sound and vibration enhancing the waterrower's quietness and smoothness of use. Ash, like all woods used in WaterRower construction, is a premium hardwood with incredible longevity and dimensional stability. For reasons of ecology, all WaterRower woods are harvested from replenishable forests. WaterRower Club Rower Black Rails have been styled to prevent scuffing, other wooden components are finished in an attractive rosewood which are more resistant to soiling than the Natural model.
If you are accustomed to the natural catch and feel of on-water rowing, your rowing technique will immediately appreciate the Apollo’s unrivalled emulation of a boat gliding through water. FDF’s patented twin tank design generates a smooth uniform stroke, including no lag of resistance at the catch and continued resistance all the way to the finish.
Adaptive rowing is a special category of races for those with physical disabilities. Under FISA rules there are 5 boat classes for adaptive rowers; mixed (2 men and 2 women plus cox) LTA (Legs, Trunk, Arms), mixed intellectual disability (2 men and 2 women plus cox) LTA (Legs, Trunk, Arms), mixed (1 man and 1 woman) TA (Trunk and Arms), and men's and women's AS (Arms and Shoulders). Events are held at the World Rowing Championships and were also held at the 2008 Summer Paralympics.[59]
There is some minor maintenance. Because it's made out of wood, which can expand and contract, the bolts need tightening every few months or so. It's easy and takes only a couple of minutes. That, and putting in a fresh water purification tablet every six to twelve months, are about it for regular maintenance. The only problem I've had with the rower (the reason for 4 stars instead of 5) was a squeak that developed after about 6 weeks. It took me some time to determine the source of the squeak, which was a metal bracket connecting the footrest board to the horizontal boards above the drum. I had to partially disassemble the top section and tighten four bolts, but that fixed the problem and it's been quiet ever since.
I have also received negative feedback about the resistance. After 15 minutes at the maximum level, you will feel that you are hardly putting an effort to row. However, this won’t be an issue if your weight is less. This could indicate an issue with the oil or gasoline mixture in the piston. Also, issues were mentioned by other customers with the footrests. They’d problem strapping their feet. It is a bigger issue as it becomes difficult for people who have small feet as the feet keeps on slipping. The footrest grip is not tight. This is affecting particularly when you would like to experience a workout without any interruption; when you actually want to go with the flow of workout. Fast rowing also becomes difficult with this type of problem as you have to stop and strap the feet back. However, the problem could be solved by using a wide and thick Velcro straps. Use your creativity and be resourceful while coming up with the ideas to solve the problem of slipping feet.
Motion of the water is different than the motion of the wave. Water at each location moves in a circular path, but the motions at different locations are “out of phase”, which means that when water at the left of the diagram is moving to the right, water a quarter of a wavelength to the right is moving down, and water next to it is moving to the left, and next to it is moving up, etc. The overall effect is a an “apparent” wave moving to the right. Thus, the velocity (speed) of a wave is not at all the same as the velocity of the water.
The WaterRower Natural is handcrafted in solid ash and stained honey oak for consistency of color. The wood was chosen due to its marvelous engineering properties, especially its ability to absorb sound and vibration, which enhances the WaterRower's quiet performance and smooth operation. Ash, like all woods used in the construction of the WaterRower, is a premium hardwood with incredible longevity and dimensional stability. In addition, the wood is harvested from replenishable forests and is hand finished with Danish oil to provide a deep luster.
Waterrower dimensions: 83'' x 22'' x 21'' / weight: 108 lbs (at minimum water level)built for home use and practically maintenance... free, rowing machine targets all major muscle groups (84% of total muscle mass) w/ excellent adjustable resistance levelsmade of kiln dried harwood for better wood strength and performance; has honey oak finish that goes well w/ other home furnitureboasts a patented water flywheel that mimics the natural dynamics of rowing yet suitable for users w/ joint concerns (chlorine tablet is available free of charge)enjoy 1 year manufacturer's warranty (upgradeable to 3-year parts while 5-year frame is free of charge w/ registration)comes w/ the s4 performance monitor for quickstart of functions and displays intensity, kcalories per hour, strokerate, heartrate, and more!Storage dimensions: 21'' x 22'' x 83'' (easily store it on end)entry height is at 12'' (at 20'' w/ optional hi-rise adaptor)noise/intrusion levels: soothing and relaxing/minimal read more
Here’s a secret, because the rowing machine provides an intense full body workout, the exercise burns a high amount of calories not only during the actual activity but also for a period after you’ve stopped. This is known as the “after-burn effect”. Essentially, you’ve worked your body so hard that it is forced to keep burning calories and fat even when you’re not rowing. The scientific jargon for this is “excess post-exercise oxygen consumption” or “EPOC” for short. But all you need to know is that if you’re doing an intense rowing workout, the benefits continue after you’re done. How great is that?

The WaterRower Natural Rowing Machine with S4 Monitor is hand crafted in solid Ash and stained Honey Oak for consistency of color.... Each rowing machine has been hand finished with Danish Oil giving a deep luster and warmth to the wood. Wood has been chosen due to its marvelous engineering properties, primary amongst these is its ability to absorb sound and vibration enhancing the WaterRower's smooth and quiet performance.;Flywheel sits in enclosed water tank to provide smooth, quiet, self-regulated resistanceSeries 4 performance monitor tracks workout intensity, stroke rate, heart rate, and moreHandcrafted rowing machine with inchwater flywheel inch that replicates actual rowing feelStores upright; measures 84 x 21 x 22 inches (W x H x D) and weighs 117 poundsStores upright; measures 84 x 21 x 22 inches (W x H x D) and weighs 117 pounds read more
×