This popular rowing machine utilizes magnetic resistance for a quiet, and very smooth workout. The Velocity Exercise CHR-2001 also features a programmable computer with 12 programs that will keep your exercising varied and challenging for years. The computer also provides data on distance, time, calories burned, pulse rate, strokes per minute, and stroke count. Additionally, the tension resistance is electronically controlled via the computer.  This electronic resistance control feature puts the CHR-2001 ahead of other magnetic rowers that tend to use knobs.
Assembly was challenging. One of the rails could not be attached because the embedded screw in the cross-beam was too crooked to fit into the hole on the rail. I had to place a nut on it to protect the screws and tap until it was true enough cap nut to be attached. The foot board is slightly wider than the top board. I will sand this to match when I reapply the finish. This will need to be done because the wood has a dry, ashy appearance. The wood is beautiful and mostly uniform. This rowing machine is a nice product, but the build quality of the unit I received was disappointing. I felt lucky that the gashes in the carton did not damage the product as the packaging was optimistic. The leading competitor I use at the gym seems to provide slightly more resistance. It is beautiful and useful, but with room for improvement.
The First Degree Fitness Challenge AR (Adjustable Resistance) is designed and engineered by professional rowers and craftsman using only the highest degree of quality components – ensuring complete satisfaction in function, performance, and reliability.  With its patented Fluid Technology, First Degree Fitness has incorporated the truest emulation of sensation, sight, and sound of real on-water rowing captured in the private setting of your own home.
The WaterRower US office got in on the Pull for a Cure fundraising action and all pulled together to raise money for breast cancer! - - - - As many of you may already know, throughout the month of October, WaterRower has been raising money through our Pull for a Cure fundraiser. For each 500m workout rowed and posted online, we'll be donating $1 towards breast cancer research! Don't forget to get your workouts in before Monday, October 31st! #PullForaCure #WaterRower
The WaterRower Club Rower has been designed for high traffic areas such as commercial gyms, studios, rehabilitation clinics, etc. Its black rails have been styled to prevent scuffing; other wooden components are finished in an attractive rosewood which are more resistant to soiling than the natural model. Each machine has been hand finished with Danish oil and urethane for protection. Wood has been chosen due to its marvelous engineering properties, primary amongst these is its ability to absorb sound and vibration enhancing the waterrower's quietness and smoothness of use. Ash, like all woods used in WaterRower construction, is a premium hardwood with incredible longevity and dimensional stability. For reasons of ecology, all WaterRower woods are harvested from replenishable forests. WaterRower Club Rower Black Rails have been styled to prevent scuffing, other wooden components are finished in an attractive rosewood which are more resistant to soiling than the Natural model.
After reading so many fantastic reviews I purchased the Classic model. Before I write what I think are the negative aspects I'll say that it gives a great workout! That is pretty obvious and I don't think that part is arguable. The disappointment began while unpacking. The wood parts were wrapped fairly well and did not have damage but there were several scratches that I had to sand out and re-oil. It appears that they were there before shipping. Putting it together would have been fast and easy- except 2 of the bolts were bent at about 15 degrees and would not fit. I had to wrap with tape and bend with vice grips. After getting it all together the rower worked well for about a week. I started to notice an annoying kind of popping sound from the left rail as the wheels rolled over on each stroke and recovery. It seems the plastic that the wheels ride on is not flat or adhered well to the rail. It isn't very loud but I can hear it well and it gets my attention, spoiling the nice sound of the water. Really disturbing. Support at WaterRower would like a video of the issue. Seems like an obvious issue and could swap out with a rail that is good instead of me trying to make a video of this small sound while moving the seat back and forth. For a $1500 machine the quality control- or lack of it is disturbing. Having to jump through a bunch of hoops because they are too cheap to just send a part is even more so. Perhaps I am being difficult but it is upsetting to have something touted as so great but put together like a $200 piece of junk. Another complaint would be the lack of any back lighting on the monitor. Really cannot see it if the lights are low. Being able to remove the monitor to attach to a PC wouldn't hurt either. While it gives a good workout the rower really suffers from poor manufacturing.
If the machine is to be housed on a wooden floor you will need a mat beneath to reduce vibration and also noise. If space is tight, the hydraulic options are usually the smallest. It's also worth checking your floor can take the weight if you're going for one of the bigger, heavier models. For most, this shouldn't be a problem, if you have any doubts get a surveyor to check as it could be a very expensive mistake!
Being able to easily store your rower is a huge plus. Make sure you investigate how well the machine stores, if it folds up or comes apart easily to be able to put it in your closet, or in other storage areas. As an example, the Concept2 Model D rowing machine folds up nicely by a simple pull pin located in the middle of the rower. Wheels on the bottom allow for easy moving.
There are various air rower or water rower techniques, but the most basic one is by starting at the back stroke, the knees should almost be completely straight prior to squeezing the shoulder blades together. Then you pull its handle to the sternum. The back of your body should naturally stay in its arched position when doing the whole movement. Do not forget to take a record of the distance you have made after every session. Some people even take it as far as uploading their results online and see how they are ranked from other people who are also doing the same. You clean learn more about rowing machine technique on this page.
Assembled dimensions: 83L x 24W x 20H inches. Total body aerobic - plus resistance - exercise. Folds for easy storage. Easy-to-use... monitor keeps you on track. American black walnut frame, some assembly required. Assembled weight: 143 lbs.. Manufacturer's warranty included (see product guarantee). American black walnut frame is handsome and sustainably harvestedWater tank ensures smooth-gliding motion and is easy to maintainEasy-to-use training monitor tracks stroke rate, intensity, distance, and timeFast assembly with only a 5mm Allen Key wrench (included)Smooth-gliding seat wheels mounted on durable rails for stable, easy movementHandlebars, seat, and footrest are comfortable and durableWorks 84 percent of muscle mass for maximum resultsCombines aerobic workout and resistance for whole body reshapingManufacturer's warranty included: see complete details in the Product Guarantee areaDisclaimer:WaterRower will not provide support or documentation for any product transported outside of the original country of purchase. read more
Fetch is the distance over which the wind interacts with the water surface to creates waves. The longer the fetch the bigger (higher) the waves are. If the shore (green in the diagram) is a hill, there will be a wind shadow which gives protection from the wind, but even if the shore is flat as a pancake and gives no protection, the waves become progressively smaller as you for upwind to the shore. Thus, rowing upwind toward shore is always an escape from waves.
Assembly was challenging. One of the rails could not be attached because the embedded screw in the cross-beam was too crooked to fit into the hole on the rail. I had to place a nut on it to protect the screws and tap until it was true enough cap nut to be attached. The foot board is slightly wider than the top board. I will sand this to match when I reapply the finish. This will need to be done because the wood has a dry, ashy appearance. The wood is beautiful and mostly uniform. This rowing machine is a nice product, but the build quality of the unit I received was disappointing. I felt lucky that the gashes in the carton did not damage the product as the packaging was optimistic. The leading competitor I use at the gym seems to provide slightly more resistance. It is beautiful and useful, but with room for improvement.
Assembled dimensions: 83L x 24W x 20H inches. Complete aerobic and resistance exercise. Folds for easy storage. Easy-to-use monito...r keeps you on track. Eco-friendly ash wood frame, some assembly required. Assembled weight: 143 lbs.. Manufacturer's warranty included (see product guarantee). Premium hardwood frame of sustainable ash with Danish oil finishBlack rails prevent scuffing; redwood finish is handsome and soil-resistantWater tank ensures smooth-gliding motion and is easy to maintainEasy-to-use training monitor tracks stroke rate, intensity, distance, and timeEasy to assemble with only a 5mm Allen Key wrench (included)Quality seat wheels mounted on durable rails for dependable, smooth movementHandlebars, seat, and footrest are comfortable and durableWorks 84 percent of muscle mass for maximum resultsCombines aerobic workout and resistance for total body reshapingManufacturer's warranty included: see complete details in the Product Guarantee areaDisclaimer:WaterRower will not provide support or documentation for any product transported outside of the original country of purchase. read more
At its founding, it had nine clubs; today, there are 12: Fairmount Rowing Association, Crescent Boat Club, Bachelors Barge Club, University Barge Club, Malta Boat Club, Vesper Boat Club, College Boat Club, Penn Athletic Club Rowing Association (Penn AC), Philadelphia Girls' Rowing Club (PGRC), Gillin Boat Club and St. Joseph's University and St. Joseph's Prep. At least 23 other clubs have belonged to the Navy at various times.[23] Many of the clubs have a rich history, and have produced a large number of Olympians and world-class competitors.[26]
Rowers may take part in the sport for their leisure or they may row competitively. There are different types of competition in the sport of rowing. In the U.S. all types of races are referred to as regattas whereas this term is only used in the UK for head-to-head or multi-lane races (such as those that take place at Dorney Lake), which generally take place in the summer season. Time trials occur in the UK during the winter, and are referred to as Head races. In the US, head races (usually about 5k, depending on the body of water) are rowed in the fall, while 2k sprint races are rowed in the spring and summer.
×