After reading so many fantastic reviews I purchased the Classic model. Before I write what I think are the negative aspects I'll say that it gives a great workout! That is pretty obvious and I don't think that part is arguable. The disappointment began while unpacking. The wood parts were wrapped fairly well and did not have damage but there were several scratches that I had to sand out and re-oil. It appears that they were there before shipping. Putting it together would have been fast and easy- except 2 of the bolts were bent at about 15 degrees and would not fit. I had to wrap with tape and bend with vice grips. After getting it all together the rower worked well for about a week. I started to notice an annoying kind of popping sound from the left rail as the wheels rolled over on each stroke and recovery. It seems the plastic that the wheels ride on is not flat or adhered well to the rail. It isn't very loud but I can hear it well and it gets my attention, spoiling the nice sound of the water. Really disturbing. Support at WaterRower would like a video of the issue. Seems like an obvious issue and could swap out with a rail that is good instead of me trying to make a video of this small sound while moving the seat back and forth. For a $1500 machine the quality control- or lack of it is disturbing. Having to jump through a bunch of hoops because they are too cheap to just send a part is even more so. Perhaps I am being difficult but it is upsetting to have something touted as so great but put together like a $200 piece of junk. Another complaint would be the lack of any back lighting on the monitor. Really cannot see it if the lights are low. Being able to remove the monitor to attach to a PC wouldn't hurt either. While it gives a good workout the rower really suffers from poor manufacturing.
The machine was easy to put together and worked well mechanically. The problem is the electronic monitor. The strokes/min registered as double the actual pace, and the distance registered as 1/10th the actual distance. I contacted customer support via email and their response was slow and inadequate. I am returning the machine and plan to buy a WaterRower.
Balanced Tear-drop Handle: The handle of the WaterRower M1 LoRise is made of aluminum for strength and lightness, with a tear-drop shape that fits comfortably into the palm of the hand to minimize wrist torque - a common cause of tendonitis. Because of its strength and lightness, the drive strap of the WaterRower M1 LoRise is high-density polyester webbing, guided by nylon pulleys. The drive strap does not wear and is maintenance-free, requiring no messy lubrication.
The rowing machine itself is unlike any other on the market with its patented water filled flywheel. It is hard to exactly copy the action of a scull on the water, but the mechanics of the flywheel spinning in water comes in a close second on dry land. The fact that the water is 800 times denser than air means that there is no need for any extra resistance or dampening that you will find in normal air rowers. The faster you pull, the more resistance is generated giving it infinite variability. However, if you want to be able to practice rowing with a faster stroke, you will have to reduce the amount of water in the tank unlike an air rower where you just have to adjust the baffle.
Sometimes, slides are placed underneath the erg to try to simulate the movement of being on the water. It allows the machine to move back and forth smoothly as if there is water beneath you. The slides can be connected in rows or columns so that rowers are forced to move together on the ergometer, similar to how they would match up their rhythm in a boat.
The dense resistance of water creates substantial drag, but on the WaterRower models, this is perfectly tempered by a whippy cord. It coils and recoils with such steady speed that one tester noted how the Classic “eats the rope back up on recovery.” This smooth agility helps balance out the impact of encountering slow water at the start of every stroke.
The WaterRower Club Rower has been designed for high traffic areas such as commercial gyms, studios, rehabilitation clinics, etc. Its black rails have been styled to prevent scuffing; other wooden components are finished in an attractive rosewood which are more resistant to soiling than the natural model. Each machine has been hand finished with Danish oil and urethane for protection. Wood has been chosen due to its marvelous engineering properties, primary amongst these is its ability to absorb sound and vibration enhancing the waterrower's quietness and smoothness of use. Ash, like all woods used in WaterRower construction, is a premium hardwood with incredible longevity and dimensional stability. For reasons of ecology, all WaterRower woods are harvested from replenishable forests. WaterRower Club Rower Black Rails have been styled to prevent scuffing, other wooden components are finished in an attractive rosewood which are more resistant to soiling than the Natural model.
Award Winning Design - The WaterRower has been designed to set it apart from other fitness equipment, featuring an attention to detail unseen in other exercise equipment. Refined Design - The WaterRower has been designed to set it apart from other fitness equipment, featuring an attention to design refinement unseen in other exercise equipment. Hand Crafting - WaterRower’s wooden models are handcrafted from a selection of the world’s finest hard woods (Ash, Cherry, Walnut, Beech and Oak).. Each model is hand finished and coated with Danish oil giving it a deep penetrating Luster. Sustainable & Eco-Friendly - All WaterRower's wooden models are crafted from the finest Appalachian hardwoods sourced only from replenishable forests.
If you are anything like me, you read the negative reviews to see what some of the complaints could potentially be...I have found none that match with my machine or experience so far. The boxes it came in were a little bunged-up but everything on the inside was perfect. Only took about 15-20 minutes to build (first time building a row machine) and another 5-10 to fill with water. We used it for a little while before we added the danish oil.
The WaterRower Club is hand crafted in solid Ash and stained for color. The WaterRower Club has been designed for High Traffic Areas such as Commercial Gyms, Studios, Rehabilitation Clinics, etc. Its Black Rails have been styled to prevent scuffing, other wooden components are finished in an attractive rosewood which is more resistant to soiling than the Natural model.
Ever since the earliest recorded references to rowing, the sporting element has been present. An Egyptian funerary inscription of 1430 BC records that the warrior Amenhotep (Amenophis) II was also renowned for his feats of oarsmanship. In the Aeneid, Virgil mentions rowing forming part of the funeral games arranged by Aeneas in honour of his father.[10] In the 13th century, Venetian festivals called regata included boat races among others.[11]
When waves run into water moving in the opposite direction, they are slowed, just as if they were approaching a beach. Wave length becomes shorter, wave height higher, and they may break. A good (bad) example of this is an ebb current flowing out of Raccoon Strait into waves coming in from the Golden Gate. Good rough water training, if that’s what you want.
The tank of the WaterRower Oxbridge Rower is made from polycarbonate, one of the strongest plastics available. It is virtually indestructible. The tank is sealed and can be filled with municipal water via a small opening closed by a stopper. This water typically contains enough chlorine to remain clear for some time. After exposure to light, the chlorine will degrade; the chlorine tablets should be added periodically.
WATER ROWER FOR HOME AND GYM USE - Crafted out of high-quality driftwood with aluminum monorail with no impact and non-load bearin...g, making it perfect for users with joint problems. Targets 84% of all major muscle areas like the arms, legs, back, shoulders, chest, core, etc. Water rower dimensions: 83 L x 22.5 W x 22.5 H Inches / Weight: 110 PoundsLIFE-LIKE WATER ROWING EXPERIENCE - Features patented WaterFlywheel, unique self-regulating resistance, ergonomic seat and handles. Suits any user without need for adjustments. Maximum user weight: 375 Pounds.TRACK YOUR PROGRESS - Water Rower comes with an intelligent S4 monitor that shows time per 2 or 500 kilometers, watts, calories burned per hour, distance, and the total time of workouts.LOW MAINTENANCE AND SPACE EFFICIENT - This water rowing machine does not require lubrication or maintenance. User simply needs to add a purification tablet in the water every 3-6 months (tablets come with the package). When not in use, tip vertically against a wall or store in closet conveniently.WARRANTY AND FREE SHIPPING - Enjoy a 1-year manufacturer warranty (Can be upgraded to 3 years on parts and 5 years on the frame for free when you register your unit). Purchase from Dazadi and enjoy free shipping. read more
Chris Kinsey works as an editor for a medical publisher and has experience dealing with many topics, ranging from athlete's foot to cancer and brain injury. Kinsey has a great deal of freelance experience writing for sports and parenting magazines as well. Kinsey holds a Bachelor of Arts in communications from California University of Pennsylvania.
The water flywheel is comprised of two paddles encased in an enclosed tank of water. As you pull the cable, the paddles move through the water creating resistance. The beauty of this machine is it uses the mass/density of water. The paddles create the drag, so the harder you pull, the more resistance increases. Think about moving your hands through water. The faster you go, the more dense water feels. The slower you go, the less you feel the resistance. And this type of resistance is excellent for your joints. Click here to read the full review.
A feature of the end of twentieth century rowing was the development of non-olympic multicrew racing boats, typically fixed seat-gigs, pilot boats and in Finland church- or longboats. The most usual craft in races held around the coasts of Britain during summer months is the Cornish pilot gig, most typically in the south-west, with crews of 6 from local towns and races of varying distances. The Cornish pilot gig was designed and built to ferry harbour and river pilots to and from ships in fierce coastal waters. The boat needed to be stable and fast with the large crew hence making it ideal for its modern racing usage. In Finland 14-oared churchboats race throughout the summer months, usually on lakes, and often with mixed crews. The largest gathering sees over 7000 rowers mainly rowing the 60 kilometres (37 mi) course at Sulkava[38] near the eastern border over a long weekend in mid July. The weekend features the World Masters churchboat event which also includes a 2 kilometres (1.24 mi) dash.[39]
Great rower. I would rate it 5 stars if it weren’t for the meter. At 27 strokes per minute, it takes me 15 minutes to row 500 meters. This is way off standard. So I can’t compare myself to online charts or do recommended workouts because the distance is so off. On some level, who cares, but I wish it worked. Will be talking to the manufacturer about it.
Most people who are new to the sport of rowing have difficulty achieving low strokes rates while trying to obtain their desired intensity – there are many comments such as “it does not feel hard enough?” or “how can I make it harder?” Rowing is about ratio and rhythm and you need to focus on a long stroke length and a powerful drive phase (push with the legs and pull with the arms). Give yourself time to learn this, it can take a few weeks before you start to feel the intensity at low stroke rates.
The WaterRower Club is hand crafted in solid Ash and stained for color. The WaterRower Club has been designed for High Traffic Areas such as Commercial Gyms, Studios, Rehabilitation Clinics, etc. Its Black Rails have been styled to prevent scuffing, other wooden components are finished in an attractive rosewood which is more resistant to soiling than the Natural model.
Assembly was challenging. One of the rails could not be attached because the embedded screw in the cross-beam was too crooked to fit into the hole on the rail. I had to place a nut on it to protect the screws and tap until it was true enough cap nut to be attached. The foot board is slightly wider than the top board. I will sand this to match when I reapply the finish. This will need to be done because the wood has a dry, ashy appearance. The wood is beautiful and mostly uniform. This rowing machine is a nice product, but the build quality of the unit I received was disappointing. I felt lucky that the gashes in the carton did not damage the product as the packaging was optimistic. The leading competitor I use at the gym seems to provide slightly more resistance. It is beautiful and useful, but with room for improvement.
Water Rower Dimensions: 88" x 22" x 28.5" / Weight: 79 Lbs (Empty Tank), 116 Lbs (With Water); Maximum User Weight And Height: 700... Lbs & 38" InseamExercise Rower Features Aluminum Makeup With Powder-Coated Aluminum Finish For High DurabilityBoasts Patented Water Flywheel Responsible For Its Natural Rowing Dynamic-Like Actually Driving A Boat With Oars! Other Features: Self-Regulating Resistance Levels-Making It Suitable For Any User, Little Maintenance Required (Tablets Available From Manufacturer Free Of Charge) And Inclusive Of S4 Performance Monitor (Displays Intensity, Kcalories/Hour, Stroke Rate, Heart Rate, And More! Enjoy 1 Year Commercial Warranty (Upgradeable To 3-Year Parts While 5-Year Frames Are Free Of Charge With Registration) read more
In the rowing machine category, there are a lot of models to chose from. They range in price from under $100 to well over $1500.  As you can imagine, you’re getting a different type of row machine at those ends of the spectrum, but within that variety there’s something for everyone.  To help guide you, we’ve listed our favorite row machine models and brands by price below:

The Club rowing machine by WaterRower utilises water resistance for an intense total body workout. This is a commercial grade model that’s designed for gym use, but the affordable price also allows homeowners to purchase a rower for personal use.This high-end model is equipped with an S4 monitor that’s packed with features that allow you to track progress such as stroke rate, heart rate, duration, and distance covered. The monitor has separated this information in individual windows, allowing you to track certain features with ease.The monitor is equipped with nine buttons. Six are dedicated to specific monitoring features while the remaining three are designed for menu navigation. For added convenience, you can link the row machine monitor to your PC or laptop using a USB cable to use with row machine software programs for training or racing purposes.
The overall rowing experience encompasses pulley, seat, and — of course — resistance. Air and water have very distinct qualities, making them impossible to compare but interesting to contrast. Air stores inertia, which feeds into intense, constant effort during a goal-oriented workout. Water’s more sluggish drag makes for demanding exercise, but one that’s less consistent.
At the junior level (in the United States), regattas require each rower to weigh in at least two hours before their race; they are sometimes given two chances to make weight at smaller regattas, with the exception of older more prestigious regattas, which allow only one opportunity to make weight. For juniors in the United States, the lightweight cutoff for men is 150.0 lb.; for women, it is 130.0 lb. In the fall the weight limits are increased for women, with the cutoff being 135 lb.
Tank: The tank of the WaterRower M1 LoRise is made from polycarbonate, one of the strongest plastics available. It is virtually indestructible. The tank is sealed and can be filled with municipal water via a small opening closed by a stopper. This water typically contains enough chlorine to remain clear for some time. After exposure to light, the chlorine will degrade and the chlorine tablets included free with the WaterRower M1 LoRise should be added periodically.
The Waterrower has recently been made famous by Kevin Spacy as the rowing machine used in the ‘House of Cards’. It is a type of wooden rowing machine produced and manufactured by Waterrower Inc. in New England, USA. The rowers were designed by ex-US national team rower john Duke in the mid 1980’s and the company to manufacture them was established in 1988.

1.) I keep reading about cracks and leaks that develop in the water tank. WaterRower even offers a tank repair kit for this very issue. It seems to me that this is a design flaw that they refuse to address, instead offering a fix for when it eventually occurs. Have you seen these tanks to eventually leak? I’m surprised they haven’t tried a one-piece tank.
The Classic Rowing Machine is designed is extremely easy to use. Additionally, it has a lot of comfort features in its design. It has an ergonomically shaped handle and padded heel rests that accommodate nearly everyone. Everything on the machine can be adjusted quickly. Because there are no movement parts, maintenance is minimal. Even the computer has a lot of one button operations, so the minute you have the rower assembled, you can get to work.
Award Winning Design - The WaterRower has been designed to set it apart from other fitness equipment, featuring an attention to detail unseen in other exercise equipment. Refined Design - The WaterRower has been designed to set it apart from other fitness equipment, featuring an attention to design refinement unseen in other exercise equipment. Hand Crafting - WaterRower’s wooden models are handcrafted from a selection of the world’s finest hard woods (Ash, Cherry, Walnut, Beech and Oak).. Each model is hand finished and coated with Danish oil giving it a deep penetrating Luster. Sustainable & Eco-Friendly - All WaterRower's wooden models are crafted from the finest Appalachian hardwoods sourced only from replenishable forests.
One downside of the Waterrower for me are the footrests. Whilst they are perfectly adequate if you want to row in shoes, rowing barefoot, which is something I like to do, is impossible. The plastic is completely square at the bottom and has sharp edges that cut into your heels. I also found that my shoes get caught when trying to put them in and out of the holders, which is a bit irritating.
Thanks for reading the fine print. About the Wiki: We don't accept sponsorships, free goods, samples, promotional products, or other benefits from any of the product brands featured on this page, except in cases where those brands are manufactured by the retailer to which we are linking. For our full ranking methodology, please read about us, linked below. The Wiki is a participant in associate programs from Amazon, Walmart, Ebay, Target, and others, and may earn advertising fees when you use our links to these websites. These fees will not increase your purchase price, which will be the same as any direct visitor to the merchant’s website. If you believe that your product should be included in this review, you may contact us, but we cannot guarantee a response, even if you send us flowers.
The WaterRower Club Rower has been designed for high traffic areas such as commercial gyms, studios, rehabilitation clinics, etc. Its black rails have been styled to prevent scuffing; other wooden components are finished in an attractive rosewood which are more resistant to soiling than the natural model. Each machine has been hand finished with Danish oil and urethane for protection. Wood has been chosen due to its marvelous engineering properties, primary amongst these is its ability to absorb sound and vibration enhancing the waterrower's quietness and smoothness of use. Ash, like all woods used in WaterRower construction, is a premium hardwood with incredible longevity and dimensional stability. For reasons of ecology, all WaterRower woods are harvested from replenishable forests. WaterRower Club Rower Black Rails have been styled to prevent scuffing, other wooden components are finished in an attractive rosewood which are more resistant to soiling than the Natural model.
Handcrafted rowing machine with inchwater flywheel inch that replicates actual rowing feelFlywheel sits in enclosed water tank to ...provide smooth, quiet, self-regulated resistanceSeries 4 performance monitor tracks workout intensity, stroke rate, heart rate, and moreHandcrafted rowing machine with "water flywheel" that replicates actual rowing feel read more
Using the same principles that govern the dynamics of a boat in water, the WaterRower S1 Stainless Steel Rower with S4 Monitor provides an unlimited range of resistance making it suitable for a variety of strength and skill levels. In a boat, the faster you move, the greater the drag and the greater the intensity of exercise required to maintain your speed. The limit to the speed you can maintain is you, your physiology, not the machine. For maximum realism and comfort, the WaterRower S1 Stainless Steel Rower's precision spragg clutch engages the instant the handle is pulled, so there is no jerkiness or jarring at the beginning of the stroke. The WaterRower S1 Stainless Steel Rower with S4 Monitor leaves you with the distinct sense that you are gliding effortlessly across the water. Order your WaterRower S1 Stainless Steel Rower from FitnessZone.com today!
The Challenge AR has the capability to allow the rower to control and adjust the resistance from “Feather light” to “Olympic sprint” delivering a silky smooth resistance to the user’s effort and instantaneous response to input with no “flat sport”.  With water resistance being the most accurate manner in which to simulate actual outdoor rowing, the Challenge AR provides a smooth and consistent sensation throughout the range of motion of the exercise experience.  
After reading so many fantastic reviews I purchased the Classic model. Before I write what I think are the negative aspects I'll say that it gives a great workout! That is pretty obvious and I don't think that part is arguable. The disappointment began while unpacking. The wood parts were wrapped fairly well and did not have damage but there were several scratches that I had to sand out and re-oil. It appears that they were there before shipping. Putting it together would have been fast and easy- except 2 of the bolts were bent at about 15 degrees and would not fit. I had to wrap with tape and bend with vice grips. After getting it all together the rower worked well for about a week. I started to notice an annoying kind of popping sound from the left rail as the wheels rolled over on each stroke and recovery. It seems the plastic that the wheels ride on is not flat or adhered well to the rail. It isn't very loud but I can hear it well and it gets my attention, spoiling the nice sound of the water. Really disturbing. Support at WaterRower would like a video of the issue. Seems like an obvious issue and could swap out with a rail that is good instead of me trying to make a video of this small sound while moving the seat back and forth. For a $1500 machine the quality control- or lack of it is disturbing. Having to jump through a bunch of hoops because they are too cheap to just send a part is even more so. Perhaps I am being difficult but it is upsetting to have something touted as so great but put together like a $200 piece of junk. Another complaint would be the lack of any back lighting on the monitor. Really cannot see it if the lights are low. Being able to remove the monitor to attach to a PC wouldn't hurt either. While it gives a good workout the rower really suffers from poor manufacturing.

The horizontal movement of the water when a wave passes is approximately equal to the up and down movement of the water. If you are on flat water and are parallel to waves made by a passing boat, your boat will move side-to-side as much as up-and–down as the wave passes under you. The side-to-side movement actually creates most of the difficulty in balancing the boat in such a situation. However, under typical conditions in the bay there can be such varied wave action that you can’t easily distinguish horizontal and vertical motion.

This rower has been designed to ensure stroke consistency and utilises a triple blade impeller system. Perfect for smaller houses or apartments, this model includes the easy tilt feature for fast fold-up and storing. Assembly is a one man job that will take twenty to thirty minutes to complete. A step by step illustrated instruction manual has been included, in addition to all of the tools needed for this process.
Row your way to fitness with this water rowing machine from WaterRower. The A1 S4 Natural is a low-maintenance exercise machine th...at's constructed from high-quality ash wood with aluminum mono rail. Engineered with the patented WaterFlywheel resistance method, it provides life-like water rowing experience while the low noise level and minimal intrusion along with the unique self-regulating resistance with infinite variable allows suits any user without the need for adjustments. With its no impact and non-load bearing, this gym equipment is also perfect for users with joint problems. Exercise all major muscle groups like the arms, legs, back, shoulders, core, etc. and see how great you're doing with the help of the S4 monitor that comes with the package. It monitors time per 2 or 500 kilometers, watts, calories burned per hour, distance, and the total time of workouts. This exercise machine also boasts minimal maintenance with no lubrication needed. You simply need to add purification tablet every 3-6 months (tablets come with the package). Storage is easy and hassle-free as well. Simply tip the machine vertically and you can easily lean it against a wall or hide it inside a closet. Moreover, enjoy 1 year manufacturer warranty (can be upgraded to 3 years parts and 5 years frame warranty for free with registration) read more
×