The WaterRower Club is hand crafted in solid Ash and stained for color. The WaterRower Club has been designed for High Traffic Areas such as Commercial Gyms, Studios, Rehabilitation Clinics, etc. Its Black Rails have been styled to prevent scuffing, other wooden components are finished in an attractive rosewood which is more resistant to soiling than the Natural model.

Rowing is a cyclic (or intermittent) form of propulsion such that in the quasi-steady state the motion of the system (the system comprising the rower, the oars, and the boat), is repeated regularly. In order to maintain the steady-state propulsion of the system without either accelerating or decelerating the system, the sum of all the external forces on the system, averaged over the cycle, must be zero. Thus, the average drag (retarding) force on the system must equal the average propulsion force on the system. The drag forces consist of aerodynamic drag on the superstructure of the system (components of the boat situated above the waterline), as well as the hydrodynamic drag on the submerged portion of the system. The propulsion forces are the forward reaction of the water on the oars while in the water. Note also that the oar can be used to provide a drag force (a force acting against the forward motion) when the system is brought to rest.
The Classic Rowing Machine is generally quiet for a water resistance machine, but some users believed that it was a little noisy. Like all rowers, whether it’s a flywheel or a waterwheel, there is going to be noise. The more effort that you put into it, the louder it’s going to get. And most find it motivating to hear the water paddles get louder as they burn more calories.
The horizontal movement of the water when a wave passes is approximately equal to the up and down movement of the water. If you are on flat water and are parallel to waves made by a passing boat, your boat will move side-to-side as much as up-and–down as the wave passes under you. The side-to-side movement actually creates most of the difficulty in balancing the boat in such a situation. However, under typical conditions in the bay there can be such varied wave action that you can’t easily distinguish horizontal and vertical motion.
Row your way to fitness with this water rowing machine from WaterRower. The A1 S4 Rose is a low-maintenance exercise machine that'...s constructed from high quality ash wood with aluminum mono rail, Rosewood staining, and Danish oil finish-perfect for both residential and commercial use. Engineered with the patented WaterFlywheel resistance method, it gives off life-like water rowing experience while the low noise level and minimal intrusion along with the unique self-regulating resistance with infinite variable allows this exerciser to suit any user without the need for adjustments. With its no impact and non-load bearing, this gym equipment is also made perfect for users with joint problems. Exercise all major muscle groups like the arms, legs, back, shoulders, core, etc. and see how great you're doing with the help of the S4 monitor that comes with the package. It monitors time per 2 or 500 kilometers, watts, calories burned per hour, distance, and the total time of workouts. This exercise machine's awesome features don't stop there! It also boasts minimal maintenance with no lubrication needed. You simply need to add purification tablet every 3-6 months (tablets come with the package). Storage is easy as well. Simply tip the machine vertically and you can easily lean it against a wall or hide it inside a closet. Moreover, enjoy 1 year manufacturer warranty (can be upgraded to 3 years parts and 5 years frame warranty for free with registration) and free shipping when you purchase your unit from Dazadi. Get it today! read more
The horizontal movement of the water when a wave passes is approximately equal to the up and down movement of the water. If you are on flat water and are parallel to waves made by a passing boat, your boat will move side-to-side as much as up-and–down as the wave passes under you. The side-to-side movement actually creates most of the difficulty in balancing the boat in such a situation. However, under typical conditions in the bay there can be such varied wave action that you can’t easily distinguish horizontal and vertical motion.
If you’re interested in using a rowing machine for focused training — whether for outdoor rowing, an indoor competition, or as part of a larger fitness program — you’ll want air resistance. If you’re drawn to rowers for the enjoyability (alongside the full-body, cardio-plus-strength training efficacy) of a rowing workout, consider a machine with water resistance.
Assembled dimensions: 86L x 24W x 27H inches. Total body fitness - aerobic and resistance exercise. Folds and rolls for easy stora...ge. Easy-to-use monitor keeps you on track. Brushed stainless steel frame, some assembly required. Assembled weight: 200 lbs.. Manufacturer's warranty included (see product guarantee). Fabricated tubular steel frame is full commercial model with high-level entry pointWater tank ensures smooth-gliding motion and is easy to maintainEasy-to-use training monitor tracks stroke rate, intensity, distance, and timeFast assembly with only a 5mm Allen Key wrench (included)Smooth-gliding seat wheels mounted on durable rails for stable, easy movement Handlebars, seat, and footrest are comfortable and durableWorks 84 percent of muscle mass for maximum resultsCombines aerobic workout and resistance for whole body reshapingManufacturer's warranty included: see complete details in the Product Guarantee areaDisclaimer:WaterRower will not provide support or documentation for any product transported outside of the original country of purchase. read more

WaterRower is made in the USA using hardwood from only replenishable sources. WaterRower strives to manufacture rowing machines that are of a stylish design and built to last, while maintaining our commitment to eco-friendliness. Our WaterRower Rowing Machines are functional fitness furniture, designed not to be hidden away like other unsightly gym equipment, but to look at home in your living room. Storing the waterrower in an upright position no wider than a dining room chair, our rowing machines can be easily laid out for a quick indoor rowing exercise session. Order your WaterRower from FitnessZone.com!

I have also received negative feedback about the resistance. After 15 minutes at the maximum level, you will feel that you are hardly putting an effort to row. However, this won’t be an issue if your weight is less. This could indicate an issue with the oil or gasoline mixture in the piston. Also, issues were mentioned by other customers with the footrests. They’d problem strapping their feet. It is a bigger issue as it becomes difficult for people who have small feet as the feet keeps on slipping. The footrest grip is not tight. This is affecting particularly when you would like to experience a workout without any interruption; when you actually want to go with the flow of workout. Fast rowing also becomes difficult with this type of problem as you have to stop and strap the feet back. However, the problem could be solved by using a wide and thick Velcro straps. Use your creativity and be resourceful while coming up with the ideas to solve the problem of slipping feet.
In the 1950s- and 1960s, more sports coaches began to use rowing machines for training and assessment of athletes' performance. One such rower developed at this time was the Harrison-Cotton machine, the brainchild of John Harrison of Leichhardt Rowing Club in Sydney and Professor Frank Cotton, produced by Ted Curtain Engineering. This was the very first piece of equipment able to measure athletic power with great accuracy, and it also imitated the actual experience of rowing more closely than any previous rowing machine.

Major domestic competitions take place in dominant rowing nations and include The Boat Race and Henley Royal Regatta in the United Kingdom, the Australian Rowing Championships in Australia, the Harvard–Yale Regatta and Head of the Charles Regatta in the United States, and Royal Canadian Henley Regatta in Canada. Many other competitions often exist for racing between clubs, schools, and universities in each nation.
Assembled dimensions: 83L x 24W x 20H inches. Complete aerobic exercise. Folds for easy storage. Easy-to-use monitor keeps you on ...track. Eco-friendly ash wood frame, some assembly required. Assembled weight: 143 lbs.. Manufacturer's warranty included (see product guarantee). Sustainable ash frame has oak stain and Danish oil finish - eco-friendly and stylishWater tank ensures smooth-gliding motion and is simple to maintainEasy-to-use training monitor tracks stroke rate, intensity, distance, and timeQuick assembly: only requires a 5mm Allen Key wrench (included)Smooth-gliding wheels mounted on sturdy railsHandlebars, seat, and footrest are comfortable and durableWorks 84 percent of muscle mass for maximum resultsCombines aerobic workout and resistance for total body reshapingManufacturer's warranty included: see complete details in the Product Guarantee areaDisclaimer:WaterRower will not provide support or documentation for any product transported outside of the original country of purchase. read more

The first known "modern" rowing races began from competition among the professional watermen in the United Kingdom that provided ferry and taxi service on the River Thames in London. Prizes for wager races were often offered by the London Guilds and Livery Companies or wealthy owners of riverside houses.[10] The oldest surviving such race, Doggett's Coat and Badge was first contested in 1715 and is still held annually from London Bridge to Chelsea.[12] During the 19th century these races were to become numerous and popular, attracting large crowds. Prize matches amongst professionals similarly became popular on other rivers throughout Great Britain in the 19th century, notably on the Tyne. In America, the earliest known race dates back to 1756 in New York, when a pettiauger defeated a Cape Cod whaleboat in a race.[13]
Function plays a large role in defining good design. When designers look at an object, they don't just consider its aesthetic appearance; they should also challenge it to be more versatile, to respond to the user's need, or to achieve its purpose more elegantly. Good design has the capacity to solve problems that sometimes we didn't even know we had. This is one of the ways design touches and enriches our everyday life.

Water rowers feature a tank that is actually filled with water as a means for resistance. As you increase the pace of rowing, the resistance naturally increases as well. This means that you can set your own pace and resistance in a single motion. The same is true for air rowers. Air rowers use a fan or flywheel to create resistance, and you have control over the intensity of the workout due to the fact that the air resistance depends on your pace. Most water and air rowers come equipped with -- or at least have as an option -- monitors that track various functions such as distance, strokes, strokes per minute and calories burned.


Assembled dimensions: 86L x 24W x 27H inches. Total body fitness - aerobic and resistance exercise. Folds and rolls for easy stora...ge. Easy-to-use monitor keeps you on track. Brushed stainless steel frame, some assembly required. Assembled weight: 200 lbs.. Manufacturer's warranty included (see product guarantee). Fabricated tubular steel frame with brushed finish - great for commercial or home useWater tank ensures smooth-gliding motion and is easy to maintainEasy-to-use training monitor tracks stroke rate, intensity, distance, and timeQuick assemble using only a 5mm Allen Key wrench (included)Smooth-gliding seat wheels mounted on durable rails for stable, easy movementHandlebars, seat, and footrest are comfortable and durableWorks 84 percent of muscle mass for maximum resultsCombines aerobic workout and resistance for total body reshapingManufacturer's warranty included: see complete details in the Product Guarantee areaDisclaimer:WaterRower will not provide support or documentation for any product transported outside of the original country of purchase. read more


Rowers may take part in the sport for their leisure or they may row competitively. There are different types of competition in the sport of rowing. In the U.S. all types of races are referred to as regattas whereas this term is only used in the UK for head-to-head or multi-lane races (such as those that take place at Dorney Lake), which generally take place in the summer season. Time trials occur in the UK during the winter, and are referred to as Head races. In the US, head races (usually about 5k, depending on the body of water) are rowed in the fall, while 2k sprint races are rowed in the spring and summer.
×